Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MHT7140S

MSKSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23

MHT7140S from MSKSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin for the regulator, as stated in the pin definition table.
2 VIN power_in Input pin with a maximum operating voltage of 24V per the DC characteristics, and the datasheet recommends placing the input capacitor close to this pin.
3 VOUT power_out Regulated 4.0V output for the MHT7140S, which requires an output-to-ground capacitor greater than 2.2μF, with tantalum recommended.

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package SOT-23
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输出电压 VOUT 3.92 4 4.08 V VIN=VOUT+2.0V, IOUT=10mA 6
输出电流 IOUT 70 100 mA VIN=VOUT+2.0V 6
负载调整率 △VOUT 25 60 mV VIN=VOUT+2.0V, 1 mA≤IOUT≤50 mA 6
低压差 VDIF 25 55 mV IOUT=1mA, △VOUT=2% 6
静态电流 ISS 1.5 3 μA 无负载 6
线性调整率 △VOUT/VOUT*△VIN 0.2 %/V IOUT+1.0V≤VIN≤24V, IOUT=1mA 6
输入电压 VIN 24 V 6
输出电压精度 -2 2 % 2

CAD (KiCad official)

  • Symbol: MHT7140S
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: mht7140s-etched.step / mht7140s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mht7140s.step / mht7140s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (11 pp, sha256 e84af7975ff4fbea, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF