component
LM34DZ
Public Made by Adomby adom
Texas Instruments Temperature Sensors, TO-92. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM34DZ
Texas Instruments · Temperature Sensors · TO-92
LM34DZ from Texas Instruments, in a TO-92. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VS | power_in | Positive power supply pin; supply voltage range is 4 V to 30 V (recommended operating conditions). |
| 2 | VOUT | output | Temperature sensor analog output, 10 mV/°F linear scale factor, can source current but sink only about 1 µA. |
| 3 | GND | power_in | Device ground pin, connect to power supply negative terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-92 |
| Category | Sensors |
| Pins | 3 |
CAD (KiCad official)
- Symbol:
LM34DZ - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92 (KiCad packages3D, STEP)
- 3D model files:
lm34dz-etched.step/lm34dz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm34dz.step/lm34dz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
5902e11d939fbbf9, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).