component
5P49V5901B000NLGI8
Public Made by Adomby adom
RENESAS Clock Generators, PLLs, Frequency Synthesizers, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown5P49V5901B000NLGI8
RENESAS · Clock Generators, PLLs, Frequency Synthesizers · QFN-24(4x4)
5P49V5901B000NLGI8 from RENESAS, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLKIN | input | Differential clock input with a weak 100 kΩ internal pull-down; it is the complement pair with CLKINB. |
| 2 | CLKINB | input | Complementary differential clock input with a weak 100 kΩ internal pull-down. |
| 3 | XOUT | input | Crystal oscillator interface output for the fundamental-mode crystal between XIN and XOUT; it can be left floating when XIN/REF is overdriven. |
| 4 | XIN/REF | input | Crystal oscillator input or single-ended LVCMOS reference clock input; the input voltage must not exceed 1.2 V, and an overdriven input should have an amplitude between 500 mV and 1.2 V with a slew rate of at least 0.2 V/ns. |
| 5 | VDDA | power_in | Analog functions power supply, 1.8 V to 3.3 V; VDDA and VDDD must have the same voltage applied. |
| 6 | CLKSEL | input | Input clock select for manual switchover mode (0 = XIN/REF, XOUT default; 1 = CLKIN, CLKINB), with a weak internal pull-down; its polarity can be changed by I2C. |
| 7 | SD/OE | input | Shutdown or output-enable control with a weak internal pull-down; as SD it shuts the device down with differential outputs driven high/low and LVCMOS outputs low, and as OE it enables or disables the outputs (default active LOW). |
| 8 | SEL1/SDA | input | Configuration select input SEL1 or I2C SDA input, as selected by OUT0_SEL_I2CB at power-up; has a weak internal pull-down. |
| 9 | SEL0/SCL | input | Configuration select input SEL0 or I2C SCL input, as selected by OUT0_SEL_I2CB at power-up; has a weak internal pull-down. |
| 10 | VDDO4 | power_in | Output power supply, 1.8 V to 3.3 V, setting the output voltage levels for OUT4/OUT4B. |
| 11 | OUT4 | output | Output clock 4, with register-selectable LVCMOS, LVPECL, HCSL or LVDS logic levels. |
| 12 | OUT4B | output | Complementary output clock 4, used as the differential complement or the second LVCMOS output. |
| 13 | OUT3B | output | Complementary output clock 3, used as the differential complement or the second LVCMOS output. |
| 14 | OUT3 | output | Output clock 3, with register-selectable LVCMOS, LVPECL, HCSL or LVDS logic levels. |
| 15 | VDDO3 | power_in | Output power supply, 1.8 V to 3.3 V, setting the output voltage levels for OUT3/OUT3B. |
| 16 | OUT2B | output | Complementary output clock 2, used as the differential complement or the second LVCMOS output. |
| 17 | OUT2 | output | Output clock 2, with register-selectable LVCMOS, LVPECL, HCSL or LVDS logic levels. |
| 18 | VDDO2 | power_in | Output power supply, 1.8 V to 3.3 V, setting the output voltage levels for OUT2/OUT2B. |
| 19 | OUT1B | output | Complementary output clock 1, used as the differential complement or the second LVCMOS output. |
| 20 | OUT1 | output | Output clock 1, with register-selectable LVCMOS, LVPECL, HCSL or LVDS logic levels. |
| 21 | VDDO1 | power_in | Output power supply, 1.8 V to 3.3 V, setting the output voltage levels for OUT1/OUT1B. |
| 22 | VDDD | power_in | Digital functions power supply, 1.8 V to 3.3 V; VDDA and VDDD must have the same voltage applied. |
| 23 | VDDO0 | power_in | Power supply for OUT0_SEL_I2CB, 1.8 V to 3.3 V, setting the output voltage level for OUT0. |
| 24 | OUT0_SEL_I2CB | bidirectional | Latched at power-up to select pins 8 and 9 as hardware SEL1/SEL0 (weak 10 kΩ pull-up) or as I2C SDA/SCL (weak 10 kΩ pull-down or floating); after power-up it acts as an LVCMOS reference output, with an internal pull-down. |
| 25 | EPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | QFN-24(4x4) |
| Category | Clock/Timing |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDDA, VDDD, VDDO | VDDA, VDDD, VDDO | 3.465 | V | 12 | |||
| Outputs VDDO (LVCMOS) voltage | -0.5 | V | 12 | ||||
| Outputs IO (SDA) current | IO | 10 | mA | 12 | |||
| Storage temperature | TSTG | -65 | 150 | °C | 12 | ||
| Junction temperature | 125 | °C | 12 | ||||
| Power supply voltage for supporting 1.8V outputs | VDDOX | 1.71 | 1.8 | 1.89 | V | 12 | |
| Power supply voltage for supporting 2.5V outputs | VDDOX | 2.375 | 2.5 | 2.625 | V | 12 | |
| Power supply voltage for supporting 3.3V outputs | VDDOX | 3.135 | 3.3 | 3.465 | V | 12 | |
| Power supply voltage for core logic functions | VDDD | 1.71 | 3.465 | V | 12 | ||
| Analog power supply voltage | VDDA | 1.71 | 3.465 | V | 12 | ||
| Operating temperature, ambient | TA | -40 | 85 | °C | 12 | ||
| Maximum load capacitance | CLOAD_OUT | 15 | pF | 3.3V LVCMOS only | 12 | ||
| External reference crystal frequency | FIN | 8 | 40 | MHz | 12 | ||
| External reference clock frequency, CLKIN/CLKINB | 5 | 350 | MHz | 12 | |||
| Power up time for all VDDs to reach minimum specified voltage | tPU | 0.05 | 5 | ms | power ramps must be monotonic | 12 | |
| Input capacitance (CLKIN, CLKINB, CLKSEL, SD/OE, SEL1/SDA, SEL0/SCL) | CIN | 3 | 7 | pF | TA = +25 °C | 13 | |
| Pull-down resistor (CLKSEL, SD/OE, SEL1/SDA, SEL0/SCL, CLKIN, CLKINB, OUT0_SEL_I2CB) | 100 | 300 | kΩ | TA = +25 °C | 13 | ||
| Programmable capacitance at XIN/REF | 9 | 25 | pF | TA = +25 °C | 13 | ||
| Programmable capacitance at XOUT | 9 | 25 | pF | TA = +25 °C | 13 | ||
| Crystal frequency | 8 | 25 | 40 | MHz | Fundamental mode | 13 | |
| Crystal equivalent series resistance (ESR) | 10 | 100 | Ω | 13 | |||
| Crystal load capacitance (CL) at <=25 MHz | CL | 6 | 8 | 12 | pF | 13 | |
| Crystal load capacitance (CL) >25 MHz to 40 MHz | CL | 6 | 8 | pF | >25M to 40M | 13 | |
| Core supply current (Iddcore) | Iddcore | 30 | 34 | mA | 100 MHz on all outputs, 25 MHz REFCLK | 13 | |
| Power down current | Iddpd | 10 | 14 | mA | SD asserted, I2C programming | 13 | |
| Output buffer supply current, LVPECL | Iddox | 42 | 47 | mA | LVPECL, 350 MHz, 3.3V VDDOx | 13 | |
| Output buffer supply current, LVCMOS | Iddox | 36 | 42 | mA | LVCMOS, 200 MHz, 3.3V VDDOx, single CMOS driver active | 13 | |
| Input HIGH voltage, differential clock input single-ended | VIH | 0.55 | 1.7 | V | Single-ended input, CLKIN/CLKINB | 14 | |
| Input amplitude, CLKIN/CLKINB | VSWING | 200 | 1200 | mV | Peak to peak value, single-ended | 14 | |
| Input slew rate, CLKIN/CLKINB | dv/dt | 0.4 | 8 | V/ns | Measured differentially | 14 | |
| Input duty cycle | dTIN | 45 | 55 | % | Measurement from differential waveform | 14 | |
| Output HIGH voltage (3.3V LVCMOS) | VOH | 2.4 | V | IOH = -15mA | 14 | ||
| Output LOW voltage (3.3V LVCMOS) | VOL | 0.4 | V | IOL = 15mA | 14 | ||
| Output leakage current (OUT1~4), 3.3V LVCMOS | IOZDD | 5 | µA | Tri-state outputs, VDDO = 3.465V | 14 | ||
| Output leakage current (OUT0), 3.3V LVCMOS | IOZDD | 30 | µA | Tri-state outputs, VDDO = 3.465V | 14 | ||
| Output LOW voltage (2.5V LVCMOS) | VOL | 0.4 | V | IOL = 12mA | 15 | ||
| Differential output voltage, TRUE binary state (LVDS 3.3V/2.5V) | VOT (+) | 247 | 454 | mV | VDDO = 3.3V+5% or 2.5V+5% | 15 | |
| Output common mode voltage (LVDS 3.3V/2.5V) | VOS | 1.125 | 1.25 | 1.375 | V | VDDO = 3.3V+5% or 2.5V+5% | 15 |
| Outputs short circuit current (LVDS 3.3V/2.5V) | IOS | 9 | 24 | mA | VOUT+ or VOUT- = 0V or VDDO | 15 | |
| Differential outputs short circuit current (LVDS 3.3V/2.5V) | IOSD | 6 | 12 | mA | VOUT+ = VOUT- | 15 | |
| Output common mode voltage (LVDS 1.8V) | VOS | 0.8 | 0.875 | 0.95 | V | VDDO = 1.8V+5% | 15 |
| Peak-to-peak output voltage swing (LVPECL) | VSWING | 0.55 | 0.993 | V | 16 | ||
| Slew rate (HCSL) | dV/dt | 1 | 4 | V/ns | Scope averaging on | 16 | |
| Voltage high (HCSL) | VHIGH | 660 | 850 | mV | 16 | ||
| Voltage low (HCSL) | VLOW | -150 | 150 | mV | 16 | ||
| Maximum voltage (HCSL) | VMAX | 1150 | mV | 16 | |||
| Minimum voltage (HCSL) | VMIN | -300 | mV | 16 | |||
| Crossing voltage value (HCSL) | VCROSS | 250 | 550 | mV | Scope averaging off | 16 | |
| Input frequency limit (XIN) | 8 | 40 | MHz | 17 | |||
| Input frequency limit (CLKIN) | 1 | 200 | MHz | 17 | |||
| VCO frequency | fVCO | 2500 | 2900 | MHz | VCO operating frequency range | 17 | |
| PFD frequency | fPFD | 1 | 150 | MHz | PFD operating frequency range | 17 | |
| Input duty cycle (AC timing) | t2 | 45 | 50 | 55 | % | Duty cycle | 17 |
| Output duty cycle, all outputs except OUT0 | 45 | 50 | 55 | % | Measured at VDD/2, VDDOX = 2.5V or 3.3V | 17 | |
| Jitter Phase Peak-to-Peak (PCIe Gen1) | tJ | 30 | 86 | ps | f = 100MHz, 25MHz crystal input, evaluation band 0Hz to Nyquist | 19 | |
| Loop bandwidth | fBW | 0.06 | 0.9 | MHz | Input frequency = 25MHz | 17 | |
| Center spread (spread spectrum) | fSPREAD | -2.5 | 2.5 | % | Programmable, ±0.25% to ±2.5% center spread | 20 | |
| Down spread (spread spectrum) | fSPREAD | -5 | -0.5 | % | Programmable, -0.5% to -5% down spread | 20 | |
| Package thermal impedance, junction to ambient | θJA | 42 | °C/W | 0 mps | 12 | ||
| Package thermal impedance, junction to case | θJC | 41.8 | °C/W | 0 mps | 12 |
CAD (KiCad official)
- Symbol:
5P49V5901B000NLGI8 - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
5p49v5901b000nlgi8-etched.step/5p49v5901b000nlgi8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);5p49v5901b000nlgi8.step/5p49v5901b000nlgi8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (37 pp, sha256
220fbf224fae5a9c, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).