component
LP2986IMMX-5.0
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP2986IMMX-5.0
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSSOP-8-0.65mm
LP2986IMMX-5.0 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GROUND | power_in | Ground reference pin for the regulator. |
| 2 | FEEDBACK | input | Sets the output voltage: tie to TAP (with SENSE tied to OUT) for the fixed 5.0 V version, or drive it from an external resistor divider for an adjustable output; the FEEDBACK pin is rated -0.3 V to 5 V. |
| 3 | TAP | output | Middle tap of the internal voltage divider, which must be tied to FEEDBACK (with OUT tied to SENSE) to output the fixed voltage of the part version. |
| 4 | IN | power_in | Input voltage supply, specified from 2.1 V to 16 V operating. |
| 5 | OUT | power_out | Regulated output, rated for up to 200 mA output current. |
| 6 | SENSE | input | Connect to OUT (with FEEDBACK tied to TAP) to output the voltage of the part version. |
| 7 | ERROR | output | Active-low open-collector error output that goes low when VOUT drops about 5% below nominal, needs an external pull-up, and can sink up to 300 µA. |
| 8 | SHUTDOWN | input | Active-high enable input: pull it low to shut down the output; the pin is rated -0.3 V to 16 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LP2986IMMX-5.0 - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lp2986immx-5-0-etched.step/lp2986immx-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2986immx-5-0.step/lp2986immx-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
f7cfc26eae25c4e3, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).