3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT3663EMS8E#PBF
Analog Devices · DC-DC Converters · MSOP-8-EP
LT3663EMS8E#PBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supplies current to the internal regulator and power switch (operating 7.5V to 36V, 60V transient) and must be capacitively bypassed to ground. |
| 2 | RUN | input | Shutdown pin: tie to ground to shut down, tie to 2.5V or more for normal operation, or connect to VIN if the shutdown feature is not used. |
| 3 | FB | input | Feedback pin of the LT3663 regulated to 0.8V; connect the feedback resistor divider tap here. |
| 4 | ILIM | passive | Output current limit program pin; connect a resistor to ground to program the regulator output current limit (0.4A to 1.2A). |
| 5 | VOUT | passive | Connected to the negative terminal of the internal output current limit sense resistor. |
| 6 | ISENSE | passive | Positive input to the internal output current limit sense resistor and the anode of the internal BOOST diode. |
| 7 | BOOST | passive | Provides a drive voltage higher than the input voltage to the internal power switch and is internally connected to the cathode of the BOOST diode. |
| 8 | SW | output | Output of the internal power switch; connect to the inductor, catch diode and boost capacitor. |
| 9 | GND | power_in | Exposed pad ground that must be soldered to the PCB and electrically connected to ground, using a large ground plane and thermal vias. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Undervoltage Lockout Rising | 7 | 7.5 | V | full temperature range | 3 | ||
| VIN Undervoltage Lockout Hysteresis | 500 | mV | 3 | ||||
| VIN Overvoltage Lockout Rising | 36 | 39 | 41 | V | full temperature range | 3 | |
| VIN Overvoltage Lockout Hysteresis | 1 | V | 3 | ||||
| VIN Supply Current Not Switching | 2.4 | 3.2 | mA | Not Switching | 3 | ||
| VIN Supply Current in Shutdown | 0.01 | 2 | µA | VRUN = 0V | 3 | ||
| Run Input Voltage High | 2.5 | V | 3 | ||||
| Run Input Voltage Low | 0.3 | V | 3 | ||||
| Run Pin Bias Current | 6 | 15 | µA | VRUN = 2.3V (Note 4) | 3 | ||
| Run Pin Bias Current | 0.01 | 0.1 | µA | VRUN = 0V | 3 | ||
| VOUT Current Limit Range | 0.4 | 1.2 | A | full temperature range | 3 | ||
| VOUT Current Limit | 0.8 | 1 | 1.2 | A | RILIM = 36.5k, full temperature range | 3 | |
| Operating Frequency LT3663 | fSW | 1350 | 1500 | 1650 | kHz | LT3663 | 3 |
| Maximum Duty Cycle | 80 | 92 | % | full temperature range | 3 | ||
| Feedback Voltage | VFB | 784 | 800 | 816 | mV | LT3663, full temperature range | 3 |
| FB Bias Current | 50 | 150 | nA | VFB = 0.8V, LT3663 | 3 | ||
| Switch Peak Current Limit | 1.6 | 2 | 2.5 | A | Note 5, full temperature range | 3 | |
| Switch VCESAT | VCESAT | 275 | mV | ISW = 1A | 3 | ||
| Minimum BOOST Voltage | 1.85 | 2.2 | V | ISW = 1A (Note 6) | 3 | ||
| Boost Diode Drop | 0.9 | 1.2 | V | IDIODE = 60mA | 3 | ||
| Boost Pin Current | 28 | mA | ISW = 1A | 3 | |||
| Input Voltage (VIN) | VIN | 60 | V | Note 2 | 2 | ||
| BOOST Pin Voltage | 50 | V | 2 | ||||
| BOOST Pin Above SW Pin | 25 | V | 2 | ||||
| VOUTS, VOUT, ISENSE, FB Pins | 6 | V | 2 | ||||
| RUN Pin | 60 | V | Note 2 | 2 | |||
| Operating Junction Temperature Range LT3663E | TJ | -40 | 125 | °C | Note 3 | 2 | |
| Storage Temperature | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 35 | °C/W | MSE package, 8-lead MSOP | 2 |
CAD (KiCad official)
- Symbol:
LT3663EMS8E#PBF - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lt3663ems8e-pbf-etched.step/lt3663ems8e-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3663ems8e-pbf.step/lt3663ems8e-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
ca22f1d13bde27d1, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).