3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2576R-12
HTC Korea TAEJIN Tech · DC-DC Converters · TO-263-5
LM2576R-12 from HTC Korea TAEJIN Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive input supply for the step-down switching regulator. Operating supply range up to 40V (45V absolute maximum). For the 12V fixed version, minimum recommended Vin is 15V. Requires a suitable input bypass capacitor (Cin) close to the pin to minimize voltage transients and supply switching currents. |
| 2 | VOUT | power_out | Emitter of the internal switching transistor (switch node). Saturation voltage V_SAT is typically 1.5V; drives the external catch diode and inductor of the buck converter. PCB copper area connected to this pin should be minimized to reduce EMI coupling to sensitive circuitry. |
| 3 | GND | power_in | Circuit ground pin. Return for the internal control circuitry and switching current. Requires proper PCB layout for a stable ground reference (single-point star ground recommended for the power and signal returns). |
| 4 | FEEDBACK | input | Senses the regulated output voltage to close the feedback loop. In the fixed 12V version this pin connects directly to the output rail; the internal R2/R1 divider applies the divided signal to the non-inverting input of the internal error amplifier (internal reference is 1.235V band-gap). |
| 5 | ON/OFF | input | TTL-compatible shutdown input. Threshold is typically 1.4V: driving above the threshold (up to +Vin) puts the regulator in low-power standby (~80µA typ). Voltages below 1.4V or leaving the pin open enable the regulator (ON). Absolute limits: -0.3V ≤ V ≤ +Vin. |
| 6 | GND | power_in | Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (Vin = 25V, ILOAD=0.5A, TJ=25℃) | Vout | 11.76 | 12 | 12.24 | V | Vin = 25V, ILOAD=0.5A, TJ=25℃ | 6 |
| Output Voltage (15V≤Vin≤40V, 0.5A≤ILOAD≤3.0A, TJ=25℃) | Vout | 11.52 | 12 | 12.48 | V | 15V≤Vin≤40V, 0.5A≤ILOAD≤3.0A, TJ=25℃ | 6 |
| Output Voltage (15V≤Vin≤40V, 0.5A≤ILOAD≤3.0A, TJ=-40 to +125℃) | Vout | 11.4 | 12.6 | V | 15V≤Vin≤40V, 0.5A≤ILOAD≤3.0A, TJ=-40 to +125℃ | 6 | |
| Oscillator Frequency | FOSC | 47 | 52 | 58 | kHz | TJ=25℃ | 7 |
| Oscillator Frequency | FOSC | 42 | 63 | kHz | TJ=-40 to +125℃ | 7 | |
| Max Duty Cycle ("0") | DC | 94 | 98 | % | Note 5: feedback removed from output and connected to 0V | 7 | |
| Current Limit (Peak Current) | ICL | 4.2 | 5.8 | 6.9 | A | TJ=25℃ | 7 |
| Current Limit (Peak Current) | ICL | 3.5 | 7.5 | A | TJ=-40 to +125℃ | 7 | |
| Quiescent Current | IQ | 9 | 11 | mA | TJ=-40 to +125℃ | 7 | |
| Standby Quiescent Current | ISTBY | 200 | 400 | µA | ON/OFF Pin = 5.0V ("off"), TJ=-40 to +125℃ | 7 | |
| ON/OFF Pin Input Current (Regulator OFF) | IIH | 15 | 30 | µA | ON/OFF Pin = 5.0V (Regulator OFF), TJ=25℃ | 7 | |
| ON/OFF Pin Input Current (Regulator ON) | IIL | 0.5 | µA | ON/OFF Pin = 0V (Regulator ON), TJ=25℃ | 7 | ||
| Saturation Voltage | VSAT | 1.5 | V | Iout=3.0A, TJ=25℃ | 7 | ||
| Saturation Voltage | VSAT | 1.8 | 2 | V | Iout=3.0A, TJ=-40 to +125℃ | 7 | |
| Quiescent Current | IQ | 5 | mA | TJ=25℃ | 7 | ||
| Standby Quiescent Current | ISTBY | 80 | µA | ON/OFF Pin = 5.0V ("off"), TJ=25℃ | 7 | ||
| Maximum Supply Voltage | Vin | 45 | V | 5 | |||
| On/Off Pin Input Voltage | -0.3 | V | -0.3V ≤ V ≤ +Vin (upper limit +Vin) | 5 | |||
| Output Voltage to Ground (Steady-State) | -1 | V | Steady-state | 5 | |||
| Storage Temperature Range | TSTG | -60 | 150 | ℃ | 5 | ||
| Minimum ESD Rating (Human Body Model) | 2 | kV | C=100 pF, R=1.5kΩ | 5 | |||
| Lead Temperature (Soldering, 10 seconds) | 260 | ℃ | Soldering, 10 seconds | 5 | |||
| Maximum Junction Temperature | TJ | 150 | ℃ | 5 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | ℃ | 5 | ||
| Supply Voltage | Vin | 40 | V | 5 | |||
| Thermal Resistance, Junction to Ambient (TO-263 5 Lead) | θJA | 70 | ℃/W | TO-263 5 Lead | 5 | ||
| Thermal Resistance, Junction to Case (TO-263 5 Lead) | θJC | 5 | ℃/W | TO-263 5 Lead | 5 |
CAD (KiCad official)
- Symbol:
LM2576R-12 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lm2576r-12-etched.step/lm2576r-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2576r-12.step/lm2576r-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTC Korea TAEJIN Tech datasheet (11 pp, sha256
2acb3c8a94295de6, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).