component
TP8016F
Public Made by Adomby adom
TPOWER LED Drivers, ESOP-8L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTP8016F
TPOWER · LED Drivers · ESOP-8L
TP8016F from TPOWER, in a ESOP-8L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground reference for the TP8016 device. |
| 2 | VDD | power_in | Supply input with an internal 5.6V zener clamp; the datasheet gives VDD UVLO thresholds of 3.1V rising and 2.7V falling, and a series supply resistor is required when the input voltage exceeds 5.6V. |
| 3 | NC | unconnected | No connection. |
| 4 | SW | output | Drain of the internal power MOSFET, rated for an SW-to-GND voltage of -0.3 to +100 V. |
| 5 | CS | input | Output current sense pin; the sense resistor RCS is connected between CS and GND, and the average LED current is set by RCS against the 200 mV VREF threshold. |
| 6 | NC | unconnected | No connection. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TPOWER |
| Package | ESOP-8L |
| Category | LED Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD,CS to GND voltage | -0.3 | 6 | V | 3 | |||
| SW to GND voltage | -0.3 | 100 | V | 3 | |||
| Power switch output current | 1.5 | A | 3 | ||||
| Power dissipation | 1.2 | W | Note 2 applies (derate with TA; PDMAX=(TJMAX-TA)/θJA) | 3 | |||
| Operating junction temperature range | -40 | 150 | ℃ | 3 | |||
| Storage temperature range | -40 | 150 | ℃ | 3 | |||
| ESD level HBM | 2000 | V | HBM | 3 | |||
| ESD level MM | 200 | V | MM | 3 | |||
| Supply voltage | VIN | 5 | 100 | V | Normal operation | 3 | |
| Output current | ILED | 1.2 | A | Normal operation, aluminum substrate; printed as <1.2 | 3 | ||
| VDD input clamp voltage | VDD_CLP | 5.6 | V | 3 | |||
| Static operating current | ISTB | 405 | μA | VDD=5V | 3 | ||
| VDD undervoltage lockout threshold (rising) | VUVLO | 3.1 | V | VDD rising | 3 | ||
| VDD undervoltage lockout hysteresis threshold (falling) | VUVLO,HYS | 2.7 | V | VDD falling | 3 | ||
| Average current sense voltage threshold | VREF | 200 | mV | 3 | |||
| Fixed off time | TOFF | 4.4 | μs | 3 | |||
| Power switch on-edge blanking time | TLEB | 200 | ns | 3 | |||
| Maximum operating frequency | FSW_MAX | 220 | kHz | 3 | |||
| Power switch on-resistance (TP8016F) | RON | 0.24 | Ω | VGS=4.5V, ID=1A | 3 | ||
| Power switch drain-source breakdown voltage | VBR_DSS | 100 | V | VGS=0V, ID=250uA | 3 | ||
| Power switch drain leakage current | ILEAK | 1 | μA | VGS=0V, VDS=80V | 3 | ||
| Output current smart temperature control start temperature | TST | 130 | ℃ | 3 | |||
| Over-temperature protection temperature | TSD | 150 | ℃ | 3 | |||
| Over-temperature protection hysteresis | THYS | 130 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
TP8016F - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8L (KiCad packages3D, STEP)
- 3D model files:
tp8016f-etched.step/tp8016f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp8016f.step/tp8016f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TPOWER datasheet (6 pp, sha256
ad006ba020210fd3, retrieved 2026-10-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).