Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF333SOT233

analogysemi · Voltage References · SOT-23-3

REF333SOT233 from analogysemi, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Supply input voltage for the REF333 (3.3 V nominal output), which should be at least VOUT + 0.02 V and no more than 5.5 V in recommended operation, with an absolute maximum input of 6.5 V.
2 OUT output Analog voltage reference output, nominally 3.3 V for the REF333, rated for an output current of ±25 mA (sourcing and sinking).
3 GND power_in Ground reference pin for the device.

Key specifications

Parameter Value
Manufacturer analogysemi
Package SOT-23-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Initial Accuracy -0.1 0.05 0.1 % 5
Line Regulation -180 45 180 µV/V VOUT + 0.05V ≤ VIN ≤ 5.5V 5
Line Regulation (over temperature) -270 270 µV/V −40°C ≤ TA ≤ 125°C, VOUT + 0.05V ≤ VIN ≤ 5.5V 5
Output Voltage Temperature Drift dVOUT/dT 5 20 ppm/°C −40°C ≤ TA ≤ 125°C 6
Load Regulation, sourcing dVOUT/dLOAD -30 -2 30 ppm/mA Sourcing, 0mA < ILOAD < 25mA, VIN = VOUT + 250mV 6
Load Regulation, sourcing (over temperature) dVOUT/dLOAD -30 30 ppm/mA −40°C ≤ TA ≤ 125°C, sourcing, 0mA < ILOAD < 10mA, VIN = VOUT + 250mV 6
Load Regulation, sinking dVOUT/dLOAD -100 -57 100 ppm/mA Sinking, −10mA < ILOAD < 0mA, VIN = VOUT + 100mV 6
Load Regulation, sinking (over temperature) dVOUT/dLOAD -150 150 ppm/mA −40°C ≤ TA ≤ 125°C, sinking, −10mA < ILOAD < 0mA, VIN = VOUT + 100mV 6
Thermal Hysteresis, first cycle dT -300 300 ppm First Cycle 6
Thermal Hysteresis, additional cycles dT -60 60 ppm Additional Cycles 6
Dropout Voltage 2 11 mV ILOAD = 50µA, output > 2.048V 6
Output Current ILOAD -25 25 mA output > 2.048V, VIN = VOUT + 250mV 6
Load Capacitance 0.1 nF 7
Supply Voltage VIN VIN 5.5 V IL = 0 7
Supply Current IQ IQ 60 80 µA IL = 0 7
Specified Temperature Range -40 125 °C 7
Operating Temperature Range (electrical table) -55 135 °C 7
Storage Temperature Range -65 150 °C 7
Supply Input Voltage (recommended) VIN 5.5 V VOUT + 0.02 lower limit as printed; minimum not numeric 4
Output Current Range (recommended) IOUT -25 25 mA 4
Operating Temperature (recommended) TA -55 135 °C 4
Input Voltage (absolute maximum) 6.5 V 3
Output Voltage (absolute maximum) 5 V 3
Operating Temperature TA (absolute maximum) TA -55 150 °C 3
Junction Temperature TJ (absolute maximum) TJ 150 °C 3
Storage Temperature Tstg (absolute maximum) Tstg -65 150 °C 3
ESD Human-Body Model (HBM) V(ESD) -8000 8000 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 3
ESD Charged-Device Model (CDM) V(ESD) -2000 2000 V Charged-device model (CDM), per JEDEC JESD22-C101 3
Output Voltage VOUT 3.3 V 5
Output Voltage Noise 36 µVPP f = 0.1Hz to 10Hz 5
Voltage Noise 41 µVRMS f = 10Hz to 10kHz 5
Noise Density 590 nV/√Hz 1kHz 5
Ripple Rejection Ratio -53 dB 100mV, 1kHz 6
Solder Heat Resistance Shift 0.015 % 6
Long-Term Stability 80 ppm 0h to 100h 6
Long-Term Stability 130 ppm 0h to 1000h 6
Dropout Voltage 100 mV ILOAD = 10mA, output > 2.048V 6
Short-Circuit Current, sourcing ISC 50 mA Sourcing 7
Short-Circuit Current, sinking ISC 50 mA Sinking 7
Turn-On Settling Time 20 ms To 0.1% at VIN = 5V with CL = 0 7
Overtemperature Supply Current IQ 85 µA 0°C ≤ TA ≤ 125°C 7
Junction-to-Ambient Thermal Resistance RθJA 176.7 °C/W SOT23-3 4
Junction-to-Board Thermal Resistance RθJB 22.9 °C/W SOT23-3 4
Junction-to-Top Characterization Parameter ψJT 4.2 °C/W SOT23-3 4
Junction-to-Board Characterization Parameter ψJB 26.7 °C/W SOT23-3 4
Junction-to-Case (Top) Thermal Resistance RθJC(top) 84.9 °C/W SOT23-3 4

CAD (KiCad official)

  • Symbol: REF333SOT233
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3 (KiCad packages3D, STEP)
  • 3D model files: ref333sot233-etched.step / ref333sot233-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref333sot233.step / ref333sot233.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: analogysemi datasheet (17 pp, sha256 1bd116cea5a7950d, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF