component
RC4580M
Public Unreviewedby Ray
HGSEMI Operational Amplifier, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
Contents
README
markdownRC4580M
HGSEMI · Operational Amplifier · SOP-8
RC4580M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of op-amp channel 1. |
| 2 | IN1- | input | Inverting input of op-amp channel 1. |
| 3 | IN1+ | input | Non-inverting input of op-amp channel 1. |
| 4 | VEE | power_in | Negative supply rail (or GND in single-supply operation). Typical dual-supply operation ±15V. |
| 5 | IN2+ | input | Non-inverting input of op-amp channel 2. |
| 6 | IN2- | input | Inverting input of op-amp channel 2. |
| 7 | OUT2 | output | Output of op-amp channel 2. |
| 8 | VCC | power_in | Positive supply rail. Typical dual-supply operation ±15V, absolute maximum ±18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
RC4580MM
CAD (KiCad official)
- Symbol:
RC4580M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
rc4580m.step |
122 KB | You want the bare part, or you mark your own boards. |
rc4580m-etched.step |
1.8 MB | You want the part with RC4580M already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 452 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (8 pp, sha256
22f21b7aa464f261, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).