3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLP2985AIM5X-4.0
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
LP2985AIM5X-4.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply, operating range 2.5 V to 16 V (recommended minimum is the greater of 3.1 V or VOUT(max) plus rated dropout voltage). |
| 2 | GND | power_in | Common ground (device substrate). |
| 3 | ON/OFF | input | Logic high enable input, with voltage range 0 V to VIN. |
| 4 | BYPASS | passive | Bypass capacitor connection for low noise operation; a 10-nF capacitor reduces output noise to 30 µVRMS in a 30-kHz bandwidth. |
| 5 | OUT | power_out | Regulated output voltage, up to 150 mA output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | ΔVO | -1 | 1 | %VNOM | IL = 1 mA | 6 | |
| Output voltage tolerance | ΔVO | -1.5 | 1.5 | %VNOM | 1 mA ≤ IL ≤ 50 mA | 6 | |
| Output voltage tolerance | ΔVO | -2.5 | 2.5 | %VNOM | 1 mA ≤ IL ≤ 50 mA, -40°C ≤ TJ ≤ 125°C | 6 | |
| Output voltage tolerance | ΔVO | -3.5 | 3.5 | %VNOM | 1 mA ≤ IL ≤ 150 mA, -40°C ≤ TJ ≤ 125°C | 6 | |
| Line regulation | ΔVO/ΔVIN | 0.007 | 0.014 | %/V | VO(NOM)+1 V ≤ VIN ≤ 16 V | 6 | |
| Line regulation | ΔVO/ΔVIN | 0.032 | %/V | VO(NOM)+1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage | VIN-VO | 1 | 3 | mV | IL = 0 mA | 6 | |
| Dropout voltage | VIN-VO | 5 | mV | IL = 0 mA, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage | VIN-VO | 7 | 10 | mV | IL = 1 mA | 6 | |
| Dropout voltage | VIN-VO | 15 | mV | IL = 1 mA, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage | VIN-VO | 40 | 60 | mV | IL = 10 mA | 6 | |
| Dropout voltage | VIN-VO | 90 | mV | IL = 10 mA, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage | VIN-VO | 120 | 150 | mV | IL = 50 mA | 6 | |
| Dropout voltage | VIN-VO | 225 | mV | IL = 50 mA, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage | VIN-VO | 280 | 350 | mV | IL = 150 mA | 6 | |
| Dropout voltage | VIN-VO | 575 | mV | IL = 150 mA, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Ground pin current | IGND | 65 | 95 | µA | IL = 0 mA | 7 | |
| Ground pin current | IGND | 125 | µA | IL = 0 mA, -40°C ≤ TJ ≤ 125°C | 7 | ||
| Ground pin current | IGND | 75 | 110 | µA | IL = 1 mA | 7 | |
| Ground pin current | IGND | 170 | µA | IL = 1 mA, -40°C ≤ TJ ≤ 125°C | 7 | ||
| Ground pin current | IGND | 120 | 220 | µA | IL = 10 mA | 7 | |
| Ground pin current | IGND | 400 | µA | IL = 10 mA, -40°C ≤ TJ ≤ 125°C | 7 | ||
| Ground pin current | IGND | 350 | 600 | µA | IL = 50 mA | 7 | |
| Ground pin current | IGND | 1000 | µA | IL = 50 mA, -40°C ≤ TJ ≤ 125°C | 7 | ||
| Ground pin current | IGND | 850 | 1500 | µA | IL = 150 mA | 7 | |
| Ground pin current | IGND | 2500 | µA | IL = 150 mA, -40°C ≤ TJ ≤ 125°C | 7 | ||
| Ground pin current (shutdown) | IGND | 0.01 | 0.8 | µA | VON/OFF < 0.3 V | 7 | |
| Ground pin current (shutdown) | IGND | 0.05 | 2 | µA | VON/OFF < 0.15 V, -40°C ≤ TJ ≤ 125°C | 7 | |
| ON/OFF input voltage high | VON/OFF | 1.4 | V | High = O/P ON | 7 | ||
| ON/OFF input voltage high | VON/OFF | 1.6 | V | High = O/P ON, -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF input voltage low | VON/OFF | 0.55 | V | Low = O/P OFF | 7 | ||
| ON/OFF input voltage low | VON/OFF | 0.15 | V | Low = O/P OFF, -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF input current | ION/OFF | 0.01 | µA | VON/OFF = 0 V | 7 | ||
| ON/OFF input current | ION/OFF | -2 | µA | VON/OFF = 0 V, -40°C ≤ TJ ≤ 125°C | 7 | ||
| ON/OFF input current | ION/OFF | 5 | µA | VON/OFF = 5 V | 7 | ||
| ON/OFF input current | ION/OFF | 15 | µA | VON/OFF = 5 V, -40°C ≤ TJ ≤ 125°C | 7 | ||
| Output noise voltage (RMS) | en | 30 | µV | BW = 300 Hz to 50 kHz, COUT = 10 µF, CBYPASS = 10 nF | 7 | ||
| Ripple rejection | ΔVO/ΔVIN | 45 | dB | f = 1 kHz, CBYPASS = 10 nF, COUT = 10 µF | 7 | ||
| Short circuit current | IO(SC) | 400 | mA | RL = 0 Ω (steady state) | 7 | ||
| Peak output current | IO(PK) | 350 | mA | VOUT ≥ VO(NOM) -5% | 7 | ||
| Supply input voltage | VIN | 3.1 | 16 | V | Recommended minimum VIN is the greater of 3.1 V or VOUT(MAX) + rated dropout voltage (maximum) | 5 | |
| ON/OFF input voltage | VON/OFF | 0 | V | max = VIN | 5 | ||
| Output current | IOUT | 150 | mA | 5 | |||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input supply voltage (survival) | VIN | -0.3 | 16 | V | 5 | ||
| Input supply voltage (operating) | VIN | 2.5 | 16 | V | 5 | ||
| Shutdown input voltage (survival) | VON/OFF | -0.3 | 16 | V | 5 | ||
| Output voltage (survival) | VOUT | -0.3 | 9 | V | 5 | ||
| Input-output voltage (survival) | -0.3 | 16 | V | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM pins 3 and 4 | V(ESD) | -1000 | 1000 | V | Human-body model, pins 3 and 4 | 5 | |
| ESD HBM pins 1, 2 and 5 | V(ESD) | -2000 | 2000 | V | Human-body model, pins 1, 2, and 5 | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 169 | °C/W | High K, DBV (SOT-23) 5 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 121.8 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 29.5 | °C/W | 6 | |||
| Junction-to-top characterization parameter | ψJT | 16.1 | °C/W | 6 | |||
| Junction-to-board characterization parameter | ψJB | 29 | °C/W | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitor, and to the LDO ground pin as close as possible to each other, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stron | 22 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LP2985AIM5X-4.0 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lp2985aim5x-4-0-etched.step/lp2985aim5x-4-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2985aim5x-4-0.step/lp2985aim5x-4-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
4204f42d0934087e, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).