component
HGV333AIM5
Public Made by Adomby adom
HGSEMI Precision OpAmps, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHGV333AIM5
HGSEMI · Precision OpAmps · SOT-23-5
HGV333AIM5 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which swings to within 100 mV of the supply rails under normal test conditions. |
| 2 | V- | power_in | Negative power supply (lowest potential); the supply VS = (V+) - (V-) must be within 1.8 V to 5.5 V, and the absolute maximum is 7 V. |
| 3 | +IN | input | Non-inverting input; the common-mode range extends 0.1 V beyond each supply rail, and input current must be limited to 10 mA or less when the signal exceeds a rail by 0.3 V or more. |
| 4 | -IN | input | Inverting input with the same common-mode range (V- - 0.1 V to V+ + 0.1 V), and input current must be limited to 10 mA or less when the signal exceeds a rail by 0.3 V or more. |
| 5 | V+ | power_in | Positive power supply (highest potential); the operating supply range is 1.8 V to 5.5 V, with an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 2 | 15 | µV | VS = 5V | 8 | |
| Power supply rejection ratio | PSRR | 1 | 8 | µV/V | VS = 1.8V to 5.5V | 8 | |
| Input bias current | IB | -70 | 70 | pA | 8 | ||
| Input bias current over full temperature range | IB | -150 | 150 | pA | TA = -40°C to +85°C | 8 | |
| Input offset current | IOS | -140 | 140 | pA | 8 | ||
| Common-mode voltage range | VCM | -0.1 | 0.1 | V | Referenced to (V-) and (V+) rails | 8 | |
| Common-mode rejection ratio | CMRR | 102 | 115 | dB | (V-) - 0.1V < VCM < (V+) + 0.1V | 8 | |
| Open-loop voltage gain | AOL | 102 | 130 | dB | (V-) + 0.1V < VO < (V+) - 0.1V | 8 | |
| Output voltage swing from supply rail | VO | 30 | 70 | mV | TA = -40°C to +85°C | 8 | |
| Short-circuit current | ISC | -5 | 5 | mA | 8 | ||
| Quiescent current per amplifier | IQ | 17 | 28 | µA | IO = 0mA, TA = -40°C to +85°C | 8 | |
| Rated supply voltage range | VS | 1.8 | 5.5 | V | 6 | ||
| Rated temperature range | -40 | 85 | °C | 6 | |||
| Supply voltage | VS | 7 | V | VS = (V+) - (V-) | 6 | ||
| Signal input pin voltage | VI | -0.3 | 0.3 | V | Referenced to (V-) and (V+) rails | 6 | |
| Input current | II | -10 | 10 | mA | 6 | ||
| Operating temperature | -40 | 85 | °C | 6 | |||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Lead temperature (soldering) | 260 | °C | 10 s soldering | 6 | |||
| ESD human body model | V(ESD) | -4000 | 4000 | V | HBM, ANSI/ESDA/JEDEC JS-001 | 6 | |
| ESD charged device model | V(ESD) | -1000 | 1000 | V | CDM, JEDEC JESD22-C101 | 6 | |
| Input offset voltage drift | dVOS/dT | 0.02 | µV/°C | TA = -40°C to +85°C | 8 | ||
| Long-term stability | 1 | µV | 8 | ||||
| Input voltage noise density | en | 55 | nV/√Hz | f = 1kHz | 8 | ||
| Input voltage noise (0.01 Hz to 1 Hz) | 0.3 | µVPP | f = 0.01Hz to 1Hz | 8 | |||
| Input voltage noise (0.1 Hz to 10 Hz) | 1.1 | µVPP | f = 0.1Hz to 10Hz | 8 | |||
| Input current noise density | in | 100 | fA/√Hz | f = 10Hz | 8 | ||
| Gain bandwidth product | GBW | 350 | kHz | CL = 100pF | 8 | ||
| Slew rate | SR | 0.16 | V/µs | G = 1 | 8 | ||
| Open-loop output impedance | ZO | 2 | kΩ | f = 350kHz, IO = 0mA | 8 | ||
| Turn-on time | 100 | µs | VS = 5V | 9 | |||
| Thermal resistance junction-to-ambient (SOT-23, 5 pin) | RθJA | 220.8 | °C/W | 7 | |||
| Thermal resistance junction-to-case top (SOT-23, 5 pin) | RθJC(top) | 97.5 | °C/W | 7 | |||
| Thermal resistance junction-to-board (SOT-23, 5 pin) | RθJB | 61.7 | °C/W | 7 | |||
| Junction-to-top characterization parameter (SOT-23, 5 pin) | ψJT | 7.6 | °C/W | 7 | |||
| Junction-to-board characterization parameter (SOT-23, 5 pin) | ψJB | 61.1 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
HGV333AIM5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
hgv333aim5-etched.step/hgv333aim5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hgv333aim5.step/hgv333aim5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (20 pp, sha256
02351dcdd4c6ed77, retrieved 2026-10-30, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).