SN74LVC1G74DCUR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	CLK	input	Clock input. Data at the D input is transferred to Q on the positive (rising) edge of CLK, provided setup/hold requirements are met.
2	D	input	Data input to the D-type flip-flop. Logic level present at D is captured to Q on the rising edge of CLK.
3	~{Q}	output	Inverted (complementary) flip-flop output. Drives ±24 mA at VCC = 3.3 V.
4	GND	power_in	Ground reference (0 V) for the device.
5	Q	output	Non-inverted flip-flop output. Drives ±24 mA at VCC = 3.3 V.
6	~{CLR}	input	Active-low asynchronous clear input. Pull low to force Q low (and ~{Q} high) regardless of CLK/D. Must be held high (inactive) for normal clocked operation.
7	~{PRE}	input	Active-low asynchronous preset input. Pull low to force Q high (and ~{Q} low) regardless of CLK/D. Must be held high (inactive) for normal clocked operation.
8	VCC	power_in	Positive supply voltage, 1.65 V to 5.5 V operating range (1.5 V minimum for data retention only).

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	VSSOP-8
Category	Logic
Pins	8

Ordering variants

Same part, different packaging or reel option.

SN74LVC1G74DCUR
SN74LVC1G74DCURDCUT
SN74LVC1G74DCURDCTR
SN74LVC1G74DCURDCTT
SN74LVC1G74DCURDQER
SN74LVC1G74DCURRSER

CAD (KiCad official)

Symbol: SN74LVC1G74DCUR
Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
3D model: VSSOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`sn74lvc1g74dcur.step`	122 KB	You want the bare part, or you mark your own boards.
`sn74lvc1g74dcur-etched.step`	2.5 MB	You want the part with `SN74LVC1G74DCUR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 622 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (24 pp, sha256 be9952765c368693, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF