component
MS8606M
Public Made by Adomby adom
杭州瑞盟 Operational Amplifier, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMS8606M
杭州瑞盟 · Operational Amplifier · MSOP-8
MS8606M from 杭州瑞盟, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A amplifier output. |
| 2 | -INA | input | Channel A inverting input; input pin voltage must stay between 0 V and VCC (absolute maximum rating). |
| 3 | +INA | input | Channel A non-inverting input; input pin voltage must stay between 0 V and VCC (absolute maximum rating). |
| 4 | GND | power_in | Ground pin for the device. |
| 5 | +INB | input | Channel B non-inverting input; input pin voltage must stay between 0 V and VCC (absolute maximum rating). |
| 6 | -INB | input | Channel B inverting input; input pin voltage must stay between 0 V and VCC (absolute maximum rating). |
| 7 | OUTB | output | Channel B amplifier output. |
| 8 | VCC | power_in | Positive supply pin; single-supply operation from 2.7 V to 5.5 V, with an absolute maximum supply voltage of 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 杭州瑞盟 |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 6 | V | 3 | |||
| Differential input voltage | -6 | 6 | V | 3 | |||
| Input pin voltage (printed as 0 to VCC) | 0 | V | 3 | ||||
| Junction temperature range | TJ | -65 | 150 | °C | 3 | ||
| Operating temperature | TA | -40 | 125 | °C | 3 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 3 | ||
| Pin (lead) temperature range | 260 | °C | 3 | ||||
| Single supply voltage | VCC | 2.7 | 5.5 | V | Single supply | 1 | |
| Input offset voltage | VOS | 80 | 300 | μV | VCC=5V, VCM=0V~5V | 4 | |
| Input offset voltage | VOS | 750 | μV | -40°C≤TA≤125°C | 4 | ||
| Common-mode rejection ratio | CMRR | 85 | 100 | dB | VCM=0V~5V | 4 | |
| Common-mode rejection ratio | CMRR | 75 | 90 | dB | -40°C≤TA≤125°C | 4 | |
| Input voltage range | 0 | 5 | V | 4 | |||
| Large-signal voltage gain | AVO | 115 | 120 | dB | RL= 2kΩ, VO= 0.5V~4.5V | 4 | |
| Input offset voltage drift | ΔVOS/ΔTA | 1.5 | 10 | μV/°C | -40°C≤TA≤125°C | 4 | |
| Settling time 0.01% | ts | 1 | μs | 0V~2V step, AV=1 | 4 | ||
| Power supply rejection ratio | PSRR | 85 | 95 | dB | 2.7V<VCM<5.5V | 5 | |
| Power supply rejection ratio | PSRR | 70 | 90 | dB | -40°C≤TA≤125°C | 5 | |
| Quiescent current per amplifier | ISY | 1.8 | mA | -40°C≤TA≤125°C, IOUT=0mA | 5 | ||
| 1/f noise peak-to-peak | enp-p | 2.3 | 3.5 | μV | f=0.1Hz~10Hz | 5 | |
| High-level output voltage | VOH | 4.96 | 4.99 | V | IL=1mA | 5 | |
| High-level output voltage | VOH | 4.7 | 4.79 | V | IL=10mA | 5 | |
| High-level output voltage | VOH | 4.7 | V | -40°C≤TA≤125°C | 5 | ||
| Low-level output voltage | VOL | 20 | 40 | mV | IL=1mA | 5 | |
| Low-level output voltage | VOL | 170 | 210 | mV | IL=10mA | 5 | |
| Low-level output voltage | VOL | 290 | mV | -40°C≤TA≤125°C | 5 | ||
| Short-circuit current | ISC | -80 | 80 | mA | 5 | ||
| Input offset voltage | VOS | 80 | 300 | μV | VCC=2.7V, VCM=0V~2.7V | 6 | |
| Input offset voltage | VOS | 750 | μV | -40°C≤TA≤125°C | 6 | ||
| Common-mode rejection ratio | CMRR | 115 | 120 | dB | VCM=0V~2.7V | 6 | |
| Common-mode rejection ratio | CMRR | 70 | 85 | dB | -40°C≤TA≤125°C | 6 | |
| Input voltage range | 0 | 2.7 | V | 6 | |||
| Large-signal voltage gain | AVO | 110 | 118 | dB | RL= 2kΩ, VO= 0.5V~2.2V | 6 | |
| Input offset voltage drift | ΔVOS/ΔTA | 1.5 | 10 | μV/°C | -40°C≤TA≤125°C | 6 | |
| Settling time 0.01% | ts | 0.5 | μs | 0V~1V step, AV=1 | 6 | ||
| High-level output voltage | VOH | 2.6 | 2.66 | V | IL=1mA | 7 | |
| High-level output voltage | VOH | 2.6 | V | -40°C≤TA≤125°C | 7 | ||
| Low-level output voltage | VOL | 25 | 40 | mV | IL=1mA | 7 | |
| Low-level output voltage | VOL | 50 | mV | -40°C≤TA≤125°C | 7 | ||
| Short-circuit current | ISC | -30 | 30 | mA | 7 | ||
| Power supply rejection ratio | PSRR | 80 | 95 | dB | 2.7V<VCM<5V | 7 | |
| Power supply rejection ratio | PSRR | 70 | 90 | dB | -40°C≤TA≤125°C | 7 | |
| Quiescent current per amplifier | ISY | 1.5 | mA | -40°C≤TA≤125°C, IOUT=0mA | 7 | ||
| 1/f noise peak-to-peak | enp-p | 2.3 | 3.5 | μV | f=0.1Hz~10Hz | 7 |
CAD (KiCad official)
- Symbol:
MS8606M - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ms8606m-etched.step/ms8606m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms8606m.step/ms8606m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 杭州瑞盟 datasheet (15 pp, sha256
da3671269efda5f4, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).