3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMD7150
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
MD7150 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground / common return for the regulator. Connect to system ground with a low-impedance trace; place the output capacitor return close to this pin. |
| 2 | VDD | power_in | Unregulated supply input (VIN). Operating range up to 18 V absolute maximum. Bypass with a >=1.0 uF input capacitor (CIN) close to the pin. |
| 3 | VOUT | power_out | Regulated 5.0 V (+/-3%) output, up to 30 mA. Requires a >=2.2 uF tantalum (or >=10 uF aluminum-electrolytic) output capacitor for loop stability; low-ESR ceramics may need a 0.5-5 ohm series resistor. Do not let VOUT exceed VIN+0.3 V (parasitic body diode in the pass FET). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-3L |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
MD7150MD1-50MD7150
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输出电压 (Output voltage), MD7150 5.0V | VOUT | 4.85 | 5 | 5.15 | V | VIN= 7V,IOUT=10mA | 4 |
| 输出电压精度 (Output voltage tolerance, catalog) | -3 | 3 | % | 1 | |||
| 输出电流 (Output current) | IOUT | 25 | 30 | mA | VIN= 7V | 4 | |
| 输入输出压差 (Input-output voltage differential) | Vdrop | 40 | 60 | mV | IOUT=1mA | 4 | |
| 输入稳定度 (Line regulation) | ΔVOUT1/ΔVIN·VOUT | 0.05 | 0.2 | %/V | 6V≤VIN≤18V, IOUT=1mA | 4 | |
| 负载稳定度 (Load regulation) | ΔVOUT2 | 60 | 100 | mV | VIN=7V, 1.0mA≤IOUT≤30mA | 4 | |
| 输出电压温度系数 (Output voltage temperature coefficient) | ΔVOUT/ΔTa·VOUT | -100 | 50 | 100 | ppm/℃ | VIN=7V,IOUT=10mA, -40℃≤Ta≤85℃ | 4 |
| 静态电流 (Quiescent current) | ISS | 1.2 | 5 | uA | VIN=18V, no load | 4 | |
| 输入电压 (Maximum input voltage) | Vmax | 18 | V | 4 | |||
| 输出短路电流 (Output short-circuit current) | Ishort | 30 | mA | Vout=0V | 4 | ||
| 输入电压 (Absolute maximum input voltage) | VIN | 18 | V | 2 | |||
| 容许功耗 (Allowable power dissipation) | PD | 250 | mW | SOT23-3/5 package | 2 | ||
| 工作周围温度范围 (Operating ambient temperature) | Topr | -40 | 85 | ℃ | 2 | ||
| 保存周围温度范围 (Storage ambient temperature) | Tstg | -40 | 125 | ℃ | 2 | ||
| 输入电容器 (Input capacitor) | CIN | 1 | µF | 5 | |||
| 输出电容器, tantalum (Output capacitor) | CL | 2.2 | µF | tantalum capacitor | 5 | ||
| 输出电容器, aluminum electrolytic (Output capacitor) | CL | 10 | µF | aluminum electrolytic capacitor | 5 |
CAD (KiCad official)
- Symbol:
MD7150 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
md7150-etched.step/md7150-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md7150.step/md7150.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (12 pp, sha256
a3ed5d5344bdc5d5, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).