Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMV358AQDRQ1

Texas Instruments · Operational Amplifier · SOIC-8

LMV358AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of channel A op-amp. Rail-to-rail output, capable of driving up to 500 pF capacitive loads while remaining stable.
2 -IN A input Inverting input of channel A. Common-mode range extends from (V-)-0.5 V to (V+)+0.5 V per absolute-max ratings; input pins are diode-clamped to the supply rails.
3 +IN A input Noninverting input of channel A. Diode-clamped to the supply rails; limit external current to <=10 mA if driven beyond rails.
4 V- power_in Negative (lowest) supply, or ground for single-supply operation. Total supply range V+ - V- is 2.5 V to 5.5 V (6 V abs max).
5 +IN B input Noninverting input of channel B. Diode-clamped to the supply rails.
6 -IN B input Inverting input of channel B. Diode-clamped to the supply rails.
7 OUT B output Output of channel B op-amp. Rail-to-rail output; short-circuit current limited (short-to-ground continuous per amp per absolute-max rating).
8 V+ power_in Positive (highest) supply. Operating range 2.5 V to 5.5 V referenced to V-; 6 V absolute maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LMV358AQDRQ1D
  • LMV358AQDRQ1
  • LMV358AQDRQ1DGK

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, ([V+] – [V–]) 0 6 V 5
Common-mode voltage (signal input pins; min referenced to (V–), max referenced to (V+)) -0.5 0.5 V Printed as (V–) – 0.5 V to (V+) + 0.5 V 5
Differential voltage (max referenced to (V+) – (V–)) 0.2 V Printed as (V+) – (V–) + 0.2 V; see footnote 4 (differential input voltages above 0.5 V applied continuously can shift VIO and IQ) 5
Current (signal input pins) -10 10 mA Signal input pins 5
Operating temperature, TA TA -55 150 °C Operating temperature range 5
Operating junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage VS 2.5 5.5 V Specified voltage range 5
Specified temperature TA -40 125 °C 5
Input offset voltage VOS -4 1 4 mV Vs = 5 V 7
Input offset voltage over temperature VOS -5 5 mV Vs = 5 V, TA = –40°C to 125°C 7
VOS vs temperature dVOS/dT -1 1 1 µV/°C TA = –40°C to 125°C 7
Power-supply rejection ratio PSRR 78 100 dB VS = 2.5 to 5.5 V, VCM = (V–) 7
Common-mode voltage range VCM -0.1 -1 V No phase reversal, rail-to-rail input; min referenced to (V–), max referenced to (V+) (printed as (V–) – 0.1 V to (V+) – 1 V) 7
Common-mode rejection ratio CMRR 86 dB VS = 2.5 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V, TA = –40°C to 125°C 7
Common-mode rejection ratio CMRR 95 dB VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V, TA = –40°C to 125°C 7
Common-mode rejection ratio CMRR 63 77 dB VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V, TA = –40°C to 125°C 7
Common-mode rejection ratio CMRR 68 dB VS = 2.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V, TA = –40°C to 125°C 7
Input bias current IB -10 10 10 pA Vs = 5 V 7
Input offset current IOS -3 3 3 pA 7
Open-loop voltage gain AOL 100 115 dB VS = 5.5 V, (V–) + 0.05 V < VO < (V+) – 0.05 V, RL = 10 kΩ 7
Open-loop voltage gain AOL 98 dB VS = 2.5 V, (V–) + 0.04 V < VO < (V+) – 0.04 V, RL = 10 kΩ 7
Open-loop voltage gain AOL 112 dB VS = 2.5 V, (V–) + 0.1 V < VO < (V+) – 0.1 V, RL = 2 kΩ 7
Open-loop voltage gain AOL 128 dB VS = 5.5 V, (V–) + 0.15 V < VO < (V+) – 0.15 V, RL = 2 kΩ 7
Voltage output swing from supply rails VO 20 50 mV VS = 5.5 V, RL = 10 kΩ 7
Voltage output swing from supply rails VO 40 75 mV VS = 5.5 V, RL = 2 kΩ 7
Short-circuit current ISC -40 40 mA Vs = 5.5 V 7
Specified voltage range VS 2.5 5.5 V 7
Quiescent current per amplifier IQ 70 125 µA IO = 0 mA, VS = 5.5 V 7
Quiescent current per amplifier IQ 150 µA IO = 0 mA, VS = 5.5 V, TA = –40°C to 125°C 7
Junction-to-ambient thermal resistance RθJA 151.9 °C/W D (SOIC), 8 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 92 °C/W D (SOIC), 8 pins 6
Junction-to-board thermal resistance RθJB 95.4 °C/W D (SOIC), 8 pins 6
Junction-to-top characterization parameter ψJT 40.2 °C/W D (SOIC), 8 pins 6
Junction-to-board characterization parameter ψJB 94.7 °C/W D (SOIC), 8 pins 6

CAD (KiCad official)

  • Symbol: LMV358AQDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lmv358aqdrq1-etched.step / lmv358aqdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv358aqdrq1.step / lmv358aqdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 c95fd3bdd5aebb68, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF