component
HGV2333M
Public Made by Adomby adom
HGSEMI Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHGV2333M
HGSEMI · Operational Amplifier · SOP-8
HGV2333M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of channel A, which swings to within about 100 mV of the rails under typical test conditions. |
| 2 | -IN A | input | Inverting input of channel A; inputs beyond the supply rails by more than 0.3 V need series current limiting to 10 mA maximum. |
| 3 | +IN A | input | Non-inverting input of channel A; the common-mode range extends 0.1 V beyond each supply rail, and the absolute input voltage limit is (V-) - 0.3 V to (V+) + 0.3 V. |
| 4 | V- | power_in | Negative supply (lowest potential); operating supply is 1.8 V to 5.5 V total, with an absolute maximum of 7 V between V+ and V-. |
| 5 | +IN B | input | Non-inverting input of channel B; the common-mode range extends 0.1 V beyond each supply rail. |
| 6 | -IN B | input | Inverting input of channel B; inputs beyond the supply rails by more than 0.3 V need series current limiting to 10 mA maximum. |
| 7 | OUT B | output | Output of channel B, which swings to within about 100 mV of the rails under typical test conditions. |
| 8 | V+ | power_in | Positive supply (highest potential); operating supply is 1.8 V to 5.5 V total, with an absolute maximum of 7 V between V+ and V-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 VS = (V+) - (V-) (absolute maximum supply voltage) | VS | 7 | V | 6 | |||
| 信号输入引脚电流 (input current, absolute maximum) | -10 | 10 | mA | 6 | |||
| 工作温度 (operating temperature, absolute maximum) | -40 | 125 | °C | 6 | |||
| 结温 (junction temperature, absolute maximum) | 150 | °C | 6 | ||||
| 贮存温度 (storage temperature) | Tstg | -65 | 150 | °C | 6 | ||
| 引脚温度（焊接）(lead temperature, soldering) | 245 | °C | 焊接 10s | 6 | |||
| ESD 人体放电模型 HBM | V(ESD) | -4000 | 4000 | V | HBM, ANSI/ESDA/JEDEC JS-001 | 6 | |
| ESD 充电器件模型 CDM | V(ESD) | -1000 | 1000 | V | CDM, JEDEC JESD22-C101 | 6 | |
| 电源电压 额定电压范围 (recommended supply voltage) | VS | 1.8 | 5.5 | V | 6 | ||
| 额定温度范围 (rated temperature range) | -40 | 125 | °C | 6 | |||
| 工作范围 (operating temperature range) | -40 | 85 | °C | 9 | |||
| 输入失调电压 (input offset voltage) | VOS | 2 | 15 | µV | VS = 5V | 8 | |
| 电源抑制比 (power supply rejection ratio) | PSRR | 1 | 8 | µV/V | VS = 1.8V 至 5.5V | 8 | |
| 输入偏置电流 (input bias current) | IB | -70 | 70 | pA | 8 | ||
| 全温度范围内输入偏置电流 (input bias current, full temperature range) | IB | -150 | 150 | pA | TA = -40°C 至 +125°C | 8 | |
| 输入失调电流 (input offset current) | IOS | -140 | 140 | pA | 8 | ||
| 共模抑制比 (common-mode rejection ratio) | CMRR | 102 | 115 | dB | (V-) - 0.1V < VCM < (V+) + 0.1V | 8 | |
| 开环电压增益 (open-loop voltage gain) | AOL | 102 | 130 | dB | (V-) + 0.1V < VO < (V+) - 0.1V | 8 | |
| 输出电压摆幅 相对于电源轨 (output voltage swing from supply rail) | 30 | 70 | mV | TA = -40°C 至 +125°C | 8 | ||
| 短路电流 (short-circuit current) | ISC | -5 | 5 | mA | 8 | ||
| 额定电压范围 (rated supply voltage range) | VS | 1.8 | 5.5 | V | 8 | ||
| 静态电流（每个放大器）(quiescent current per amplifier) | IQ | 17 | 28 | µA | IO = 0mA，TA = -40°C 至 +125°C | 8 | |
| 热阻 结至环境 RθJA (SOP-8, HGV2333) | RθJA | 124 | °C/W | 7 | |||
| 热阻 结至外壳（顶部）RθJC(top) (SOP-8, HGV2333) | RθJC(top) | 73.7 | °C/W | 7 | |||
| 热阻 结至电路板 RθJB (SOP-8, HGV2333) | RθJB | 64.4 | °C/W | 7 | |||
| 特征参数 结至顶部 ψJT (SOP-8, HGV2333) | ψJT | 18 | °C/W | 7 | |||
| 特征参数 结至电路板 ψJB (SOP-8, HGV2333) | ψJB | 63.9 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
HGV2333M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hgv2333m-etched.step/hgv2333m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hgv2333m.step/hgv2333m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (20 pp, sha256
b0f384166d25d760, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).