3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT1460KCS3-5#TRPBF
Analog Devices · Voltage References · SOT-23
LT1460KCS3-5#TRPBF from Analog Devices, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input for the reference; the datasheet limits the input voltage to 30V absolute maximum, requires at least 0.9V minimum input/output differential, and reverse polarity of -15V is the stated reverse-voltage rating. |
| 2 | OUT | power_out | Trimmed reference output that supplies up to 20mA with no output capacitor required and remains stable with capacitive loads. |
| 3 | GND | power_in | Ground reference pin for the reference, connected to the common of the circuit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (initial) | -0.5 | 0.5 | % | 5 | |||
| Output voltage temperature coefficient | 25 | 50 | ppm/°C | TMIN ≤ TJ ≤ TMAX | 5 | ||
| Line regulation | 150 | 800 | 1000 | ppm/V | VOUT + 0.9V ≤ VIN ≤ VOUT + 2.5V | 6 | |
| Line regulation | 50 | 100 | 130 | ppm/V | VOUT + 2.5V ≤ VIN ≤ 20V | 6 | |
| Load regulation, sourcing | 1000 | 3000 | 4000 | ppm/mA | IOUT = 100µA | 6 | |
| Load regulation, sourcing | 50 | 200 | 300 | ppm/mA | IOUT = 10mA | 6 | |
| Load regulation, sourcing | 20 | 70 | 100 | ppm/mA | IOUT = 20mA | 6 | |
| Thermal regulation | 2.5 | 10 | ppm/mW | ΔP = 200mW | 6 | ||
| Dropout voltage | 0.9 | V | VIN, VOUT, IOUT = 0 | 6 | |||
| Dropout voltage | 1.3 | 1.4 | V | VIN, VOUT, IOUT = 10mA | 6 | ||
| Output current short | 40 | mA | VOUT short to GND | 6 | |||
| Reverse leakage | 0.5 | 10 | µA | VIN = -15V | 6 | ||
| Supply current (LT1460S3-5) | 160 | 200 | 240 | µA | Full operating temperature range (l) | 6 | |
| Output voltage noise, 0.1Hz to 10Hz | 4 | ppm (P-P) | 0.1Hz ≤ f ≤ 10Hz | 7 | |||
| Output voltage noise, 10Hz to 1kHz | 4 | ppm (RMS) | 10Hz ≤ f ≤ 1kHz | 7 | |||
| Long-term stability of output voltage | 100 | ppm/√kHr | 7 | ||||
| Hysteresis | 50 | ppm | ΔT = 0°C to 70°C | 7 | |||
| Hysteresis | 250 | ppm | ΔT = -40°C to 85°C | 7 | |||
| Input voltage | VIN | 20 | V | Minimum VOUT + 0.9V (text, page 15); operates from VOUT + 0.9V to 20V | 15 | ||
| Specified operating temperature range (K grade) | TA | 0 | 70 | °C | Commercial (C) range, LT1460KCS3-5 per order table | 2 | |
| Reverse voltage | -15 | V | 2 | ||||
| Output short-circuit duration | 5 | sec | TA = 25°C, VIN > 10V | 2 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 2 | ||
| Maximum junction temperature | TJMAX | 125 | °C | S3 SOT-23 package | 2 | ||
| Thermal resistance, junction to ambient | θJA | 228 | °C/W | S3 SOT-23 package | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LT1460KCS3-5#TRPBF - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.0050000000000001 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lt1460kcs3-5-etched.step/lt1460kcs3-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1460kcs3-5.step/lt1460kcs3-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
16fce24e0111ae15, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).