3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC2774L-31YM5-TR
Microchip Tech · Monitors & Reset Circuits · SOT-23-5
MIC2774L-31YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /RST | output | Push-pull active-low reset output, asserted low whenever VIN or VDD falls below the threshold voltage and held for no fewer than 140 ms after VIN and VDD return above the threshold limits. |
| 2 | GND | power_in | Ground. |
| 3 | /MR | input | Manual reset input; driving it low initiates an immediate unconditional reset, with an internal pull-up to VDD so it may be left open if unused. |
| 4 | IN | input | Adjustable undervoltage detector input compared to the internal 300 mV reference, where an undervoltage condition triggers a reset sequence. |
| 5 | VDD | power_in | Power supply input for internal circuitry (1.5V to 5.5V operating) and input to the fixed-threshold voltage monitor, where an undervoltage condition triggers a reset sequence. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Undervoltage Threshold on VDD (code 31, VTH = 3.09V) | VUV_THR | -1.5 | 1.5 | % | VTH ±1.5%, VTH nominal 3.09V; See Table 5-1 | 3 | |
| IN Undervoltage Threshold | VREF | 295 | 300 | 305 | mV | Note 2 | 3 |
| IN Input Current (over temperature) | IIN | 10 | nA | TMIN ≤ TA ≤ TMAX | 3 | ||
| Reset Pulse Width | tRST | 140 | 280 | ms | TMIN ≤ TA ≤ TMAX | 3 | |
| RST or /RST Output Voltage Low | VOL | 0.3 | V | ISINK = 1.6 mA; VDD ≥ 1.6V | 3 | ||
| RST or /RST Output Voltage High | VOH | 0.8 | V | 0.8 × VDD; ISOURCE = 500 µA; VDD ≥ 1.5V | 4 | ||
| /MR Input High Voltage | VIH | 0.7 | V | 0.7 × VDD; Note 2 | 4 | ||
| /MR Input Low Voltage | VIL | 0.3 | V | 0.3 × VDD; Note 2 | 4 | ||
| /MR Internal Pull-Up Current | IPU | 100 | 250 | nA | 4 | ||
| /MR Input Current | IIN | 100 | 250 | nA | V/MR < VIL | 4 | |
| Supply Voltage (VDD) absolute maximum | VDD | -0.3 | 7 | V | 3 | ||
| Input Voltages (VIN, V/MR) absolute maximum | VIN, V/MR | -0.3 | 7 | V | 3 | ||
| Output Voltages (V/RST, VRST) absolute maximum | V/RST, VRST | -0.3 | 7 | V | 3 | ||
| RST, /RST Current | 20 | mA | 3 | ||||
| ESD Rating | 1.5 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 | |||
| Supply Voltage (VDD) operating | VDD | 1.5 | 5.5 | V | 3 | ||
| Input Voltages (VIN, V/MR) operating | VIN, V/MR | -0.3 | 6 | V | 3 | ||
| Output Voltage (V/RST, VRST, H & L Versions) operating | V/RST, VRST | -0.3 | V | Upper limit VDD + 0.3V | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | Note 1 | 4 | |
| Storage Temperature Range | TS | -65 | 150 | °C | 4 | ||
| Thermal Resistance, SOT-23 5-Ld | θJA | 256 | °C/W | 4 | |||
| Supply Current | IDD | 3.5 | µA | VDD = VIN = VTH + 1.6%; Note 2; /MR, RST, /RST open | 3 | ||
| VDD Hysteresis Voltage | VHYST | 1 | % | 3 | |||
| IN Hysteresis Voltage | VHYST | 3 | mV | 3 | |||
| IN Input Current | IIN | 5 | pA | 3 | |||
| Propagation Delay (IN to reset) | tPROP | 20 | µs | VIN = (VREF(MAX) + 100 mV) to VIN = (VREF(MIN), 100 mV), /MR = open | 3 | ||
| /MR Propagation Delay | tPROP | 5 | µs | V/MR < (VIL, 100 mV) Note 2 | 4 | ||
| /MR Minimum Input Pulse Width | tMIN | 33 | ns | Reset occurs, V/MR < VIL | 4 |
CAD (KiCad official)
- Symbol:
MIC2774L-31YM5-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic2774l-31ym5-tr-etched.step/mic2774l-31ym5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2774l-31ym5-tr.step/mic2774l-31ym5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
d8aa379ca98fe90c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).