3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP1501T-30E
Microchip Tech · Voltage References · SOT-23-6
MCP1501T-30E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Buffered VREF output, which is tristated when the device is in shutdown. |
| 2 | GND | power_in | System ground and power supply return, to be connected to system ground. |
| 3 | GND | power_in | System ground and power supply return, to be connected to system ground. |
| 4 | SHDN | input | Active-low digital shutdown input; when low there is no output, and the device must be powered up before this pin is used. |
| 5 | GND | power_in | System ground and power supply return, to be connected to system ground. |
| 6 | VDD | power_in | Power supply input that also serves as the reference input voltage; refer to the Electrical Tables for the minimum voltage and place a 0.1uF capacitor very close to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3.2 | 5.5 | V | MCP1501-30 | 5 | |
| Output Voltage | VOUT | 2.997 | 3 | 3.003 | V | Temperature at +25C | 6 |
| Temperature Coefficient | TC | 10 | 50 | ppm/C | 6 | ||
| Line Regulation | VOUT/VIN | 5 | 50 | ppm/V | 6 | ||
| Load Regulation (sink) | VOUT/IOUT | 10 | 40 | ppm/mA | sink; -5 mA < ILOAD | 6 | |
| Load Regulation (source) | VOUT/IOUT | 15 | 70 | ppm/mA | source; ILOAD < +5 mA | 6 | |
| Dropout Voltage | VDO | 200 | mV | -5 mA < ILOAD < +5 mA | 6 | ||
| Supply Current | IDD | 140 | 550 | µA | No Load | 6 | |
| Supply Current (+25C) | IDD | 350 | µA | No Load, TA = +25°C | 6 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 7 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 7 | ||
| Thermal Resistance SOT-23-6 | JA | 190.5 | °C/W | SOT-23-6 | 7 | ||
| VDD Absolute Maximum | VDD | 5.5 | V | 5 | |||
| Maximum Current into VDD Pin | 30 | mA | 5 | ||||
| Clamp Current | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 5 | |
| Maximum Output Current Sunk | 30 | mA | sunk by OUTPUT pin | 5 | |||
| Maximum Output Current Sourced | 30 | mA | sourced by OUTPUT pin | 5 | |||
| Maximum Load Current | ILOAD | 20 | mA | TA = +25°C; all device options | 6 | ||
| Power on Reset Release Voltage | VPOR | 1.45 | V | rising VDD | 5 | ||
| Power on Reset Rearm Voltage | 0.8 | V | dropping VDD | 5 | |||
| Power Supply Rejection Ratio | PSRR | 94 | dB | All device options, VIN = 5.5V, 60 Hz at 100 mVP-P | 6 | ||
| Shutdown Low Input Voltage | VIL | 1.35 | V | VIN = 5.5V | 6 | ||
| Shutdown High Input Voltage | VIH | 3.8 | V | 6 | |||
| Shutdown Current | ISHDN | 205 | nA | TA = +25°C; all device options | 6 | ||
| Output Voltage Hysteresis | ΔVOUT_HYST | 300 | µV | Refer to Section 2.1.9 Output Voltage Hysteresis for testing conditions | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 27 |
CAD (KiCad official)
- Symbol:
MCP1501T-30E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mcp1501t-30e-etched.step/mcp1501t-30e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1501t-30e.step/mcp1501t-30e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (39 pp, sha256
f13d94a440c9f052, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).