3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP4728A1-E
Microchip Tech · Pre-ordered MCUs · MSOP-10
MCP4728A1-E from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage pin, also used as external DAC reference; must be kept within 2.7V to 5.5V for specified operation, with about 0.1 µF ceramic bypass to ground recommended. |
| 2 | SCL | input | I2C serial clock input, open-drain input that needs a pull-up resistor to VDD (5 kΩ to 10 kΩ for Standard/Fast mode, less than 1 kΩ for High Speed mode). |
| 3 | SDA | bidirectional | I2C serial data input and open-drain output that needs a pull-up resistor to VDD (5 kΩ to 10 kΩ for Standard/Fast mode, less than 1 kΩ for High Speed mode). |
| 4 | LDAC | input | Schmitt trigger input that transfers input register contents to the output registers (VOUT) on a High-to-Low transition and selects the device for reading and writing I2C address bits. |
| 5 | RDY/BSY | output | Open-drain EEPROM programming status indicator, High when idle and Low during programming, needing an external pull-up of about 100 kΩ to VDD. |
| 6 | VOUT A | output | Buffered rail-to-rail analog voltage output of channel A, able to drive up to 1000 pF load, with RL greater than 5 kΩ recommended. |
| 7 | VOUT B | output | Buffered rail-to-rail analog voltage output of channel B, able to drive up to 1000 pF load, with RL greater than 5 kΩ recommended. |
| 8 | VOUT C | output | Buffered rail-to-rail analog voltage output of channel C, able to drive up to 1000 pF load, with RL greater than 5 kΩ recommended. |
| 9 | VOUT D | output | Buffered rail-to-rail analog voltage output of channel D, able to drive up to 1000 pF load, with RL greater than 5 kΩ recommended. |
| 10 | VSS | power_in | Ground reference and current return path, to be connected to a ground plane (preferably analog ground) through a low-impedance connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Embedded Processors & Controllers |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 2.7 | 5.5 | V | 3 | ||
| Supply Current with External Reference | IDD_EXT | 800 | 1400 | µA | VREF = VDD, VDD = 5.5V, all 4 channels in Normal mode | 3 | |
| Supply Current with Internal Reference | IDD_INT | 800 | 1400 | µA | VREF = Internal Reference, VDD = 5.5V, all 4 channels in normal mode | 3 | |
| Power-Down Current with Internal Reference | IPD_INT | 45 | 60 | µA | All 4 channels are powered down, VREF = Internal Reference | 3 | |
| Power-Down Current with External Reference | IPD_EXT | 40 | nA | All 4 channels are powered down. (VREF = VDD) | 3 | ||
| Resolution | n | 12 | Bits | Code Change: 000h to FFFh | 4 | ||
| Integral Nonlinearity Error | INL | 2 | 13 | LSB | Note 5 | 4 | |
| DNL Error | DNL | -0.75 | 0.2 | 0.75 | LSB | Note 5 | 4 |
| Offset Error | VOS | 5 | 20 | mV | Code = 000h | 4 | |
| Gain Error | GE | -1.25 | 0.4 | 1.25 | % of FSR | Code = FFFh, Offset error is not included. Typical value is at room temperature | 4 |
| Internal Voltage Reference | VREF | 2.007 | 2.048 | 2.089 | V | 4 | |
| Power-on Reset Threshold Voltage | VPOR | 2.2 | V | All circuits, including EEPROM, are ready to operate. | 4 | ||
| Power-Up Ramp Rate | VRAMP | 1 | V/s | Note 2, Note 4 | 4 | ||
| Offset Error Drift | ΔVOS/°C | 0.16 | ppm/°C | -45°C to +25°C | 4 | ||
| Offset Error Drift | ΔVOS/°C | 0.44 | ppm/°C | +25°C to +125°C | 4 | ||
| Gain Error Drift | ΔGE/°C | -3 | ppm/°C | 4 | |||
| Internal VREF Temperature Coefficient | ΔVREF/°C | 125 | ppm/°C | -40 to 0°C | 4 | ||
| Internal VREF Temperature Coefficient | ΔVREF/°C | 45 | ppm/°C | 0 to +125°C | 4 | ||
| Reference Output Noise | ENREF | 290 | µVp-p | Code = FFFh, 0.1, 10 Hz, Gx =1 | 4 | ||
| 1/f Corner Frequency | fCORNER | 400 | Hz | 4 | |||
| Output Voltage Settling Time | TSETTLING | 6 | µs | Note 8 | 5 | ||
| Analog Output Time Delay from Power-Down Mode | TdExPD | 4.5 | µs | VDD = 5V, Note 4, Note 9 | 5 | ||
| Power Supply Rejection | PSRR | -57 | dB | VDD = 5V ±10%, VREF = Internal | 5 | ||
| Capacitive Load Stability | CL | 1000 | pF | RL =5kΩ, No oscillation, Note 4 | 5 | ||
| Slew Rate | SR | 0.55 | V/µs | 5 | |||
| Phase Margin | pM | 66 | Degree (°) | CL = 400 pF, RL = ∞ | 5 | ||
| Short Circuit Current | ISC | 15 | 24 | mA | VDD = 5V, All VOUT Pins = Grounded. Tested at room temperature. | 5 | |
| Output Low Voltage | VOL | 0.4 | V | IOL = 3 mA, SDA and RDY/BSY pins | 6 | ||
| Schmitt Trigger Low Input Threshold Voltage | VIL | 0.3 | V | VDD > 2.7V. SDA, SCL, LDAC pins (max printed as 0.3VDD) | 6 | ||
| Schmitt Trigger Low Input Threshold Voltage | VIL | 0.2 | V | VDD ≤ 2.7V. SDA, SCL, LDAC pins (max printed as 0.2VDD) | 6 | ||
| Schmitt Trigger High Input Threshold Voltage | VIH | 0.7 | V | SDA, SCL, LDAC pins (min printed as 0.7VDD) | 6 | ||
| Input Leakage | ILI | -1 | 1 | µA | SCL = SDA = LDAC =VDD, SCL = SDA = LDAC =VSS | 6 | |
| Pin Capacitance | CPIN | 3 | pF | Note 4 | 6 | ||
| EEPROM Write Time | TWRITE | 25 | 50 | ms | EEPROM write time | 6 | |
| Data Retention | 200 | Years | At +25°C, Note 3 | 6 | |||
| LDAC Low Time | TLDAC | 210 | ns | Updates analog outputs (Note 3) | 6 | ||
| SCL Rise Time | TRSCL | 1000 | ns | Standard Mode | 9 | ||
| SCL Rise Time | TRSCL | 300 | ns | Fast Mode (min 20 + 0.1Cb) | 9 | ||
| SDA Rise Time | TRSDA | 1000 | ns | Standard Mode | 9 | ||
| SCL Fall Time | TFSCL | 300 | ns | Standard Mode | 9 | ||
| SDA Fall Time | TFSDA | 300 | ns | Standard Mode | 9 | ||
| Data Input Setup Time | TSU:DAT | 250 | ns | Standard Mode | 9 | ||
| Data Input Setup Time | TSU:DAT | 100 | ns | Fast Mode | 9 | ||
| Data Hold Time | THD:DAT | 0 | 3450 | ns | Standard Mode | 9 | |
| Data Hold Time | THD:DAT | 0 | 900 | ns | Fast Mode | 9 | |
| Output Valid from Clock | TAA | 0 | 3750 | ns | Standard Mode | 9 | |
| Output Valid from Clock | TAA | 0 | 1200 | ns | Fast Mode | 9 | |
| Bus Free Time | TBUF | 4700 | ns | Standard Mode | 10 | ||
| Bus Free Time | TBUF | 1300 | ns | Fast Mode | 10 | ||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Supply Pins | -110 | 110 | mA | 3 | |||
| Current at Output Pins | -25 | 25 | mA | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient Temp. with Power Applied | -55 | 125 | °C | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Operating Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Thermal Resistance, 10L-MSOP | θJA | 202 | °C/W | 10 |
CAD (KiCad official)
- Symbol:
MCP4728A1-E - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
mcp4728a1-e-etched.step/mcp4728a1-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4728a1-e.step/mcp4728a1-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (68 pp, sha256
7e6515c45a02ffe4, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).