Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISOW7840FDWER

Texas Instruments · Digital Isolators · SOIC-16-300mil

ISOW7840FDWER from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage for the primary side, referenced to GND1 (3 V to 5.5 V input supply range per the datasheet features).
2 GND1 power_in Ground connection for VCC on the input side.
3 INA input Input channel A.
4 INB input Input channel B.
5 INC input Input channel C.
6 IND input Input channel D.
7 NC unconnected Not connected.
8 GND1 power_in Ground connection for VCC on the input side (second GND1 pin).
9 GND2 power_in Ground connection for VISO on the isolated output side.
10 SEL input VISO selection pin: VISO = 5 V when SEL is shorted to VISO; VISO = 3.3 V when SEL is shorted to GND2 or left floating (see Section 9.4).
11 OUTD output Output channel D.
12 OUTC output Output channel C.
13 OUTB output Output channel B.
14 OUTA output Output channel A.
15 GND2 power_in Ground connection for VISO on the isolated output side (second GND2 pin).
16 VISO power_out Isolated supply voltage, determined by the SEL pin (5 V or 3.3 V), referenced to GND2.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.5 6 V 9
Isolated supply voltage VISO -0.5 6 V 9
Voltage at INx, OUTx, SEL pins VIO -0.5 V 9
Maximum output current through data channels IO -15 15 mA 9
Junction temperature TJ 150 °C 9
Storage temperature Tstg -65 150 °C 9
Supply voltage VCC 3 5.5 V 9
High level output current IOH -4 mA VSO = 5 V 9
High level output current IOH -2 mA VSO = 3.3 V 9
Low level output current IOL 4 mA VSO = 5 V 9
Low level output current IOL 2 mA VSO = 3.3 V 9
Low-level input voltage VIL 0 V 9
Data rate DR 100 Mbps 9
Ambient temperature TA -40 125 °C 9
Isolated supply voltage VISO 4.75 5.07 5.43 V External IISO = 0 to 50 mA 13
Isolated supply voltage VISO 4.5 5.07 5.43 V External IISO = 0 to 130 mA 13
Low level output voltage VOL 0.2 0.4 V IO = 4 mA, see Figure 8-1 13
Propagation delay time tPLH, tPHL 13 17.6 ns See Figure 8-1 26
Pulse width distortion PWD 0.6 4.7 ns /tPHL, tPLH/ 26
Output signal rise and fall times tr, tf 2 4 ns 26
DC line regulation VISO(LINE) 2 mV/V IISO = 50 mA, VCC = 4.5 V to 5.5 V 13
DC load regulation VISO(LOAD) 1 % IISO = 0 to 130 mA 13
Efficiency at maximum load current EFF 53 % IISO = 130 mA, CLOAD = 0.1 µF // 10 µF; VI = 0 V (ISOW784x with F suffix) 13
Positive-going UVLO threshold on VCC, VISO VCC+(UVLO) 2.7 V 13
Negative-going UVLO threshold on VCC, VISO VCC-(UVLO) 2.1 V 13
UVLO threshold hysteresis on VCC, VISO VHYS (UVLO) 0.2 V 13
Low level input current IIL -10 µA VIL = 0 at INx or SEL 13
High level input current IIH 10 µA VIH = VSI (1) at INx or SEL 13
Common mode transient immunity CMTI 100 kV/us VI = VSI or 0 V, VCM = 1000 V; see Figure 8-2 13
DC current from supply under short circuit on VISO ICC_SC 137 mA VISO shorted to GND2 13
Output ripple on isolated supply (pk-pk) VISO(RIP) 100 mV 20-MHz bandwidth, CLOAD = 0.1 µF // 20 µF, IISO = 130 mA 13
Current drawn from supply (ISOW7840F, 5-V input, 5-V output) ICC 23 mA No external ILOAD; VI = VSI (ISOW7840 with F suffix) 14
Current drawn from supply (ISOW7840F, 5-V input, 5-V output) ICC 17 mA No external ILOAD; VI = 0 V (ISOW7840 with F suffix) 14
Current drawn from supply (ISOW7840F, 5-V input, 5-V output) ICC 21 mA All channels switching with square wave clock input of 1 Mbps; CL = 15 pF, No external ILOAD 14
Current drawn from supply (ISOW7840F, 5-V input, 5-V output) ICC 24 mA All channels switching with square wave clock input of 10 Mbps; CL = 15 pF, No external ILOAD 14
Current drawn from supply (ISOW7840F, 5-V input, 5-V output) ICC 56 mA All channels switching with square wave clock input of 100 Mbps; CL = 15 pF, No external ILOAD 14
Current available to isolated supply (ISOW7840F, 5-V/5-V) IISO(OUT) 128 mA VI = VSI (ISOW7840 with F suffix) 14
Current available to isolated supply (ISOW7840F, 5-V/5-V) IISO(OUT) 130 mA VI = 0 V (ISOW7840 with F suffix) 14
Current available to isolated supply (ISOW7840F, 5-V/5-V) IISO(OUT) 127 mA All channels switching with square wave clock input of 10 Mbps; CL = 15 pF 14
Current available to isolated supply (ISOW7840F, 5-V/5-V) IISO(OUT) 111 mA All channels switching with square wave clock input of 100 Mbps; CL = 15 pF 14
Channel-channel output skew time tSK(o) 2.5 ns Same-direction channels 26
Part-part skew time tSK(p-p) 4.5 ns 26
Junction-to-ambient thermal resistance RθJA 56.8 °C/W 10
Junction-to-case (top) thermal resistance RθJC(top) 15.6 °C/W 10
Junction-to-board thermal resistance RθJB 28.5 °C/W 10

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper pins. Ensure that enough copper is present on both GND pins to prevent the internal junction temperature of the 43

CAD (KiCad official)

  • Symbol: ISOW7840FDWER
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: isow7840fdwer-etched.step / isow7840fdwer-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isow7840fdwer.step / isow7840fdwer.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 dd05ae9e3ce84dfc, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF