component
TLV3201AIDBVR
Public Made by Adomby adom
Texas Instruments Comparators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTLV3201AIDBVR
Texas Instruments · Comparators · SOT-23-5
TLV3201AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull comparator output. Swings from GND to VCC; typical VOL = 175 mV and VOH = 120 mV below VCC at ISINK/ISOURCE = 4 mA. Short-circuit current typically 40 mA sinking, 52 mA sourcing. |
| 2 | GND | power_in | Negative supply / ground reference. Tied to the network ground terminal; all voltages in the datasheet are referenced to this pin. |
| 3 | IN+ | input | Non-inverting comparator input. Rail-to-rail: common-mode range extends from (VEE) − 0.2 V to (VCC) + 0.2 V. Input bias current typ 1 pA (50 pA max at 25 °C). Signal input voltage limit −0.5 V to VCC + 0.5 V, ±10 mA absolute max. |
| 4 | IN- | input | Inverting comparator input. Rail-to-rail common-mode range extends from (VEE) − 0.2 V to (VCC) + 0.2 V. Input bias current typ 1 pA (50 pA max at 25 °C). Signal input voltage limit −0.5 V to VCC + 0.5 V, ±10 mA absolute max. |
| 5 | VCC | power_in | Positive supply, 2.7 V to 5.5 V (7 V absolute maximum). Quiescent current typically 40 µA at VCC = 5 V (50 µA max). Decouple with a local bypass capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
TLV3201AIDBVRTLV3201AIDBVTTLV3201AIDCKTLV3201AIDBVRDCKTLV3202AIDTLV3201AIDBVRDTLV3202AIDGKTLV3201AIDBVRDGK
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 7 | V | 2 | ||||
| Voltage, signal input terminals (lower limit; upper limit printed as (VCC) + 0.5 V) | -0.5 | V | With respect to network ground | 2 | |||
| Current, signal input terminals | -10 | 10 | mA | 2 | |||
| Output short circuit | 100 | mA | Short-circuit to ground | 2 | |||
| Operating temperature range | -55 | 125 | °C | Over operating free-air temperature range | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Junction temperature | TJ | 150 | °C | 2 | |||
| ESD rating, human body model (TLV3201) | 2000 | V | Human body model (HBM), TLV3201 | 2 | |||
| Input offset voltage | VIO | 1 | 5 | mV | VCM = VCC / 2 | 3 | |
| Input offset voltage over temperature | VIO | 6 | mV | TA = –40°C to +125°C | 3 | ||
| Input offset voltage drift | dVOS/dT | 1 | 10 | μV/°C | TA = –40°C to +125°C | 3 | |
| Power-supply rejection ratio | PSRR | 65 | 85 | dB | VCM = VCC / 2, VCC = 2.5 V to 5.5 V | 3 | |
| Input bias current | IIB | 1 | 50 | pA | VCM = VCC / 2 | 3 | |
| Input bias current over temperature | IIB | 5 | nA | TA = –40°C to +125°C | 3 | ||
| Input offset current | IIO | 1 | 50 | pA | VCM = VCC / 2 | 3 | |
| Input offset current over temperature | IIO | 2.5 | nA | TA = –40°C to +125°C | 3 | ||
| Common-mode rejection ratio | CMRR | 60 | 70 | dB | –0.2 V < VCM < 5.2 V | 3 | |
| Propagation delay, low to high | tpd | 47 | 50 | ns | Input overdrive = 20 mV, CL = 15 pF | 3 | |
| Propagation delay, low to high | tpd | 43 | 50 | ns | Input overdrive = 100 mV, CL = 15 pF | 3 | |
| Propagation delay, low to high, over temperature | tpd | 55 | ns | TA = –40°C to +125°C | 3 | ||
| Propagation delay, high to low | tpd | 45 | 50 | ns | Input overdrive = 20 mV, CL = 15 pF | 3 | |
| Propagation delay, high to low | tpd | 42 | 50 | ns | Input overdrive = 100 mV, CL = 15 pF | 3 | |
| Propagation delay, high to low, over temperature | tpd | 55 | ns | TA = –40°C to +125°C | 3 | ||
| Output voltage swing, VOL | VOL | 175 | 190 | mV | ISINK = 4 mA, from lower rail | 3 | |
| Output voltage swing, VOL over temperature | VOL | 225 | mV | TA = –40°C to +125°C | 3 | ||
| Output voltage swing, VOH | VOH | 120 | 140 | mV | ISOURCE = 4 mA, from upper rail | 3 | |
| Output voltage swing, VOH over temperature | VOH | 170 | mV | TA = –40°C to +125°C | 3 | ||
| Short-circuit current, sinking (per comparator) | ISC | 40 | 48 | mA | Per comparator | 3 | |
| Short-circuit current, sourcing (per comparator) | ISC | 52 | 60 | mA | Per comparator | 3 | |
| Specified supply voltage | VCC | 2.7 | 5.5 | V | 3 | ||
| Quiescent current | IQ | 40 | 50 | μA | 3 | ||
| Quiescent current over temperature | IQ | 65 | μA | TA = –40°C to +125°C | 3 | ||
| Specified temperature range | -40 | 125 | °C | 3 | |||
| Common-mode rejection ratio (VCC 2.7 V table) | CMRR | 56 | 68 | dB | –0.2 V < VCM < 2.9 V | 4 | |
| Propagation delay, low to high (VCC 2.7 V table) | tpd | 47 | 50 | ns | Input overdrive = 20 mV, CL = 15 pF | 4 | |
| Propagation delay, low to high (VCC 2.7 V table) | tpd | 42 | 50 | ns | Input overdrive = 100 mV, CL = 15 pF | 4 | |
| Propagation delay, low to high, over temperature (VCC 2.7 V table) | tpd | 55 | ns | TA = –40°C to +125°C | 4 | ||
| Propagation delay, high to low (VCC 2.7 V table) | tpd | 40 | 50 | ns | Input overdrive = 20 mV, CL = 15 pF | 4 | |
| Propagation delay, high to low (VCC 2.7 V table) | tpd | 38 | 50 | ns | Input overdrive = 100 mV, CL = 15 pF | 4 | |
| Propagation delay, high to low, over temperature (VCC 2.7 V table) | tpd | 55 | ns | TA = –40°C to +125°C | 4 | ||
| Output voltage swing, VOL (VCC 2.7 V table) | VOL | 230 | 260 | mV | ISINK = 4 mA, from lower rail | 4 | |
| Output voltage swing, VOL over temperature (VCC 2.7 V table) | VOL | 325 | mV | TA = –40°C to +125°C | 4 | ||
| Output voltage swing, VOH (VCC 2.7 V table) | VOH | 210 | 250 | mV | ISOURCE = 4 mA, from upper rail | 4 | |
| Output voltage swing, VOH over temperature (VCC 2.7 V table) | VOH | 350 | mV | TA = –40°C to +125°C | 4 | ||
| Short-circuit current, sinking (per comparator, VCC 2.7 V table) | ISC | 13 | 19 | mA | Per comparator | 4 | |
| Short-circuit current, sourcing (per comparator, VCC 2.7 V table) | ISC | 15 | 21 | mA | Per comparator | 4 | |
| Quiescent current (VCC 2.7 V table) | IQ | 36 | 46 | μA | 4 | ||
| Quiescent current over temperature (VCC 2.7 V table) | IQ | 60 | μA | TA = –40°C to +125°C | 4 | ||
| Input hysteresis | 1.2 | mV | 3 | ||||
| Rise time | tr | 2.9 | ns | 10% to 90% | 3 | ||
| Fall time | tf | 3.7 | ns | 10% to 90% | 3 | ||
| Rise time (VCC 2.7 V table) | tr | 4.8 | ns | 10% to 90% | 4 | ||
| Fall time (VCC 2.7 V table) | tf | 5.2 | ns | 10% to 90% | 4 | ||
| Junction-to-ambient thermal resistance (DBV) | θJA | 237.8 | °C/W | DBV (SOT-23, 5 pins) | 5 | ||
| Junction-to-case (top) thermal resistance (DBV) | θJCtop | 108.7 | °C/W | DBV (SOT-23, 5 pins) | 5 | ||
| Junction-to-board thermal resistance (DBV) | θJB | 64.1 | °C/W | DBV (SOT-23, 5 pins) | 5 | ||
| Junction-to-top characterization parameter (DBV) | ψJT | 12.1 | °C/W | DBV (SOT-23, 5 pins) | 5 | ||
| Junction-to-board characterization parameter (DBV) | ψJB | 63.3 | °C/W | DBV (SOT-23, 5 pins) | 5 |
CAD (KiCad official)
- Symbol:
TLV3201AIDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tlv3201aidbvr-etched.step/tlv3201aidbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv3201aidbvr.step/tlv3201aidbvr.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tlv3201aidbvr.step |
85 KB | You want the bare part, or you mark your own boards. |
tlv3201aidbvr-etched.step |
2.0 MB | You want the part with TLV3201AIDBVR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 515 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
663a9ffe1cebba49, retrieved 2026-08-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).