component
MSP430AFE223IPW
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430AFE223IPW
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-24
MSP430AFE223IPW from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0.0+ | input | SD24_A positive analog input A0.0. |
| 2 | A0.0- | input | SD24_A negative analog input A0.0. |
| 3 | A1.0+ | input | SD24_A positive analog input A1.0 (not available on MSP430AFE2x1). |
| 4 | A1.0- | input | SD24_A negative analog input A1.0 (not available on MSP430AFE2x1). |
| 5 | AVCC | power_in | Analog supply voltage, positive terminal; must not power up prior to DVCC. |
| 6 | AVSS | power_in | Analog supply voltage, negative terminal. |
| 7 | VREF | power_in | Input for an external reference voltage or output for the internal reference voltage (can be used as mid-voltage). |
| 8 | A2.0+ | input | SD24_A positive analog input A2.0 (not available on MSP430AFE2x2 and MSP430AFE2x1). |
| 9 | A2.0- | input | SD24_A negative analog input A2.0 (not available on MSP430AFE2x2 and MSP430AFE2x1). |
| 10 | TEST/SBWTCK | input | Selects test mode for the JTAG pins on P1.5 to P1.7 and P2.0; the device protection fuse is connected to TEST, and it also serves as the Spy-Bi-Wire test clock input. |
| 11 | RST/NMI/SBWTDIO | input | Reset or nonmaskable interrupt input; also Spy-Bi-Wire test data input/output for device programming and test. |
| 12 | P1.0/SVSIN/TACLK/SMCLK/TA2 | bidirectional | General-purpose digital I/O pin; also analog input to the supply voltage supervisor, Timer_A3 TACLK clock input, SMCLK signal output, and Timer_A3 Out2 output. |
| 13 | DVSS | power_in | Digital supply voltage, negative terminal. |
| 14 | P2.6/XT2IN | bidirectional | Input terminal of the crystal oscillator; also a general-purpose digital I/O pin. |
| 15 | P2.7/XT2OUT | bidirectional | Output terminal of the crystal oscillator; also a general-purpose digital I/O pin. |
| 16 | DVCC | power_in | Digital supply voltage, positive terminal. |
| 17 | P1.1/TA1/SDCLK | bidirectional | General-purpose digital I/O pin; also Timer_A3 capture inputs CCI1A and CCI1B, Timer_A3 compare Out1 output, and SD24_A bit stream clock output. |
| 18 | P1.2/TA0/SD0DO | bidirectional | General-purpose digital I/O pin; also Timer_A3 capture inputs CCI0A and CCI0B, Timer_A3 compare Out0 output, and SD24_A bit stream data output for channel 0. |
| 19 | P1.3/UTXD0/SD1DO | bidirectional | General-purpose digital I/O pin; also USART0 UART transmit data out and SD24_A bit stream data output for channel 1 (not available on MSP430AFE2x1). |
| 20 | P1.4/URXD0/SD2DO | bidirectional | General-purpose digital I/O pin; also USART0 UART receive data in and SD24_A bit stream data output for channel 2 (not available on MSP430AFE2x2 and MSP430AFE2x1). |
| 21 | P1.5/SIMO0/SVSOUT/TMS | bidirectional | General-purpose digital I/O; also USART0 SPI slave-in/master-out, SVS comparator output, and JTAG test mode select (TMS input for device programming and test). |
| 22 | P1.6/SOMI0/TA2/TCK | bidirectional | General-purpose digital I/O pin; also USART0 SPI slave-out/master-in, Timer_A3 compare Out2 output, and JTAG test clock (TCK input for device programming and test). |
| 23 | P1.7/UCLK0/TA1/TDO/TDI | bidirectional | General-purpose digital I/O pin; also USART0 external clock input (UART/SPI) or clock output (SPI), Timer_A3 compare Out1 output, and JTAG TDO/TDI data output or programming data input. |
| 24 | P2.0/STE0/TA0/TDI/TCLK | bidirectional | General-purpose digital I/O pin; also USART0 SPI slave transmit enable, Timer_A3 compare Out0 output, and JTAG test data input or test clock input for device programming and test. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-24 |
| Category | Embedded Processors & Controllers |
| Pins | 24 |
CAD (KiCad official)
- Symbol:
MSP430AFE223IPW - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
msp430afe223ipw-etched.step/msp430afe223ipw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430afe223ipw.step/msp430afe223ipw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (63 pp, sha256
2b9d6953a48a5335, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).