3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74ACT373DWR
Texas Instruments · Latches · SOIC-20-300mil
SN74ACT373DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low buffered output-enable input; when high, it places all eight Q outputs in the high-impedance state without affecting the latch contents. |
| 2 | 1Q | output | Latch 1 3-state output that follows 1D while LE is high and holds the latched level when LE is taken low. |
| 3 | 1D | input | Data input to latch 1, sampled while LE is high and latched when LE goes low. |
| 4 | 2D | input | Data input to latch 2, sampled while LE is high and latched when LE goes low. |
| 5 | 2Q | output | Latch 2 3-state output that follows 2D while LE is high and holds the latched level when LE is taken low. |
| 6 | 3Q | output | Latch 3 3-state output that follows 3D while LE is high and holds the latched level when LE is taken low. |
| 7 | 3D | input | Data input to latch 3, sampled while LE is high and latched when LE goes low. |
| 8 | 4D | input | Data input to latch 4, sampled while LE is high and latched when LE goes low. |
| 9 | 4Q | output | Latch 4 3-state output that follows 4D while LE is high and holds the latched level when LE is taken low. |
| 10 | GND | power_in | Ground reference pin for the device; all inputs and outputs are referenced to this pin. |
| 11 | LE | input | Latch enable input; when high the Q outputs follow the D inputs, and when taken low the Q outputs are latched. |
| 12 | 5Q | output | Latch 5 3-state output that follows 5D while LE is high and holds the latched level when LE is taken low. |
| 13 | 5D | input | Data input to latch 5, sampled while LE is high and latched when LE goes low. |
| 14 | 6D | input | Data input to latch 6, sampled while LE is high and latched when LE goes low. |
| 15 | 6Q | output | Latch 6 3-state output that follows 6D while LE is high and holds the latched level when LE is taken low. |
| 16 | 7Q | output | Latch 7 3-state output that follows 7D while LE is high and holds the latched level when LE is taken low. |
| 17 | 7D | input | Data input to latch 7, sampled while LE is high and latched when LE goes low. |
| 18 | 8D | input | Data input to latch 8, sampled while LE is high and latched when LE goes low. |
| 19 | 8Q | output | Latch 8 3-state output that follows 8D while LE is high and holds the latched level when LE is taken low. |
| 20 | VCC | power_in | Positive supply pin; the datasheet specifies 4.5 V to 5.5 V operation for the SN74ACT373 and requires a bypass capacitor near this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 4 | ||
| Input voltage range | VI | -0.5 | V | 4 | |||
| Output voltage range | VO | -0.5 | V | 4 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 4 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 4 | |
| Continuous output current | IO | -50 | 50 | mA | VO = 0 to VCC | 4 | |
| Continuous current through VCC or GND | -200 | 200 | mA | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 4.5 | 5.5 | V | 4 | ||
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input voltage | VIL | 0.8 | V | 4 | |||
| Input voltage | VI | 0 | V | 4 | |||
| Output voltage | VO | 0 | V | 4 | |||
| High-level output current | IOH | -24 | mA | 4 | |||
| Low-level output current | IOL | 24 | mA | 4 | |||
| Input transition rise or fall rate | Δt/Δv | 8 | ns/V | 4 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 101.2 | °C/W | DW (SOIC) package | 4 | ||
| High-level output voltage | VOH | 4.4 | 4.49 | V | IOH = -50 µA, VCC 4.5 V | 5 | |
| High-level output voltage | VOH | 5.4 | 5.49 | V | IOH = -50 µA, VCC 5.5 V | 5 | |
| High-level output voltage | VOH | 3.76 | V | IOH = -24 mA, VCC 4.5 V | 5 | ||
| High-level output voltage | VOH | 4.76 | V | IOH = -24 mA, VCC 5.5 V | 5 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL = 50 µA, VCC 4.5 V | 5 | ||
| Low-level output voltage | VOL | 0.44 | V | IOL = 24 mA, VCC 4.5 V | 5 | ||
| Off-state output current (high-impedance) | IOZ | -2.5 | 2.5 | µA | VO = VCC or GND, VCC 5.5 V | 5 | |
| Input current | II | -1 | 1 | µA | VI = VCC or GND, VCC 5.5 V | 5 | |
| Quiescent supply current | ICC | 4 | 40 | µA | VI = VCC or GND, IO = 0, VCC 5.5 V | 5 | |
| Increase in supply current per input | ΔICC | 0.6 | 1.5 | mA | One input at 3.4 V, other inputs at GND or VCC, VCC 5.5 V | 5 | |
| Input capacitance | Ci | 4.5 | pF | VI = VCC or GND, VCC 5 V | 5 | ||
| Pulse duration, LE high | tw | 8 | ns | VCC = 5 V ± 0.5 V | 5 | ||
| Setup time, data before LE↓ | tsu | 8 | ns | VCC = 5 V ± 0.5 V | 5 | ||
| Hold time, data after LE↓ | th | 1 | ns | VCC = 5 V ± 0.5 V | 5 | ||
| Propagation delay D to Q (low-to-high) | tPLH | 1.5 | 8.5 | 11.5 | ns | From D to Q, VCC = 5 V ± 0.5 V | 6 |
| Propagation delay D to Q (high-to-low) | tPHL | 1.5 | 8 | 11.5 | ns | From D to Q, VCC = 5 V ± 0.5 V | 6 |
| Propagation delay LE to Q (low-to-high) | tPLH | 2 | 8.5 | 11.5 | ns | From LE to Q, VCC = 5 V ± 0.5 V | 6 |
| Propagation delay LE to Q (high-to-low) | tPHL | 1.5 | 8 | 11.5 | ns | From LE to Q, VCC = 5 V ± 0.5 V | 6 |
| Output enable time OE to Q (high) | tPZH | 1.5 | 8 | 10.5 | ns | From OE to Q, VCC = 5 V ± 0.5 V | 6 |
| Output enable time OE to Q (low) | tPZL | 1.5 | 7.5 | 10.5 | ns | From OE to Q, VCC = 5 V ± 0.5 V | 6 |
| Output disable time OE to Q (high) | tPHZ | 2.5 | 9 | 12.5 | ns | From OE to Q, VCC = 5 V ± 0.5 V | 6 |
| Output disable time OE to Q (low) | tPLZ | 1 | 7.5 | 10 | ns | From OE to Q, VCC = 5 V ± 0.5 V | 6 |
| Power dissipation capacitance | Cpd | 40 | pF | CL = 50 pF, f = 1 MHz, VCC = 5 V | 6 |
CAD (KiCad official)
- Symbol:
SN74ACT373DWR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
sn74act373dwr-etched.step/sn74act373dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74act373dwr.step/sn74act373dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
40715ded7a1ca192, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).