Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RT7737GGE

Richtek Tech · AC-DC Controllers and Regulators · SOT-23-6

RT7737GGE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BURST input Programmable burst switching green mode / burst mode level input. Sets the burst threshold via an external resistor (RBS in the application circuit). Pin number inferred from typical Richtek SOT-23-6 flyback controller ordering; verify against pin configuration diagram.
2 COMP input Loop compensation / feedback input, typically driven by an optocoupler collector for secondary-side feedback. Pin number inferred; verify.
3 GND power_in Signal and power ground reference for the controller.
4 CS input Current-sense input from the MOSFET source resistor (RCS_RC in the application circuit). Used for cycle-by-cycle current limit and over-load protection; also monitored for CS-pin open protection.
5 GATE output Gate driver output for the primary-side power MOSFET. Driver capability 200mA source / 300mA sink.
6 VDD power_in Controller bias supply, typically fed from an auxiliary winding through a rectifier and bulk capacitor. Protected by UVLO and VDD over-voltage protection (OVP).

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • RT7737GGE

CAD (KiCad official)

  • Symbol: RT7737GGE
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: rt7737gge-etched.step / rt7737gge-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt7737gge.step / rt7737gge.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (1 pp, sha256 4954224f6f16202f, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF