3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTPS76950QDBVRQ1
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
TPS76950QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage; the absolute maximum input voltage is 13.5 V, and the recommended input range is 2.7 V to 10 V. |
| 2 | GND | power_in | Ground reference pin for the regulator; all voltages are referenced to the network ground terminal. |
| 3 | EN | input | Logic enable input that shuts the regulator down into sleep mode when driven low; the voltage on EN must stay between -0.3 V and VI + 0.3 V. |
| 4 | NC | unconnected | No internal connection on the fixed-output options such as TPS76950-Q1; the FB feedback function applies only to the adjustable TPS76901-Q1. |
| 5 | OUT | power_out | Regulated output voltage; the absolute maximum voltage on OUT and FB is 7 V, and output current is limited internally to 100 mA continuous. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | -0.3 | 13.5 | V | 3 | |||
| Voltage range at EN | -0.3 | V | 3 | ||||
| Voltage on OUT, FB | 7 | V | 3 | ||||
| Operating virtual junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Input voltage | VI | 2.7 | 10 | V | 4 | ||
| Output voltage | VO | 1.2 | 5.5 | V | 4 | ||
| Continuous output current | IO | 0 | 100 | mA | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Output voltage (5-V version) | VO | 4.85 | 5.15 | V | TJ = -40°C to 125°C, 6 V < VIN < 10 V | 4 | |
| Quiescent current (GND current) | 28 | µA | EN = 0 V, IO = 100 mA, TJ = -40°C to 125°C | 5 | |||
| Output current limit | 350 | 750 | mA | VO = 0 V | 5 | ||
| Standby current | 2 | µA | TJ = -40°C to 125°C | 5 | |||
| High level enable input voltage | 1.7 | V | 2.7 V < VI < 10 V | 5 | |||
| Low level enable input voltage | 0.9 | V | 2.7 V < VI < 10 V | 5 | |||
| Input current (EN) | -1 | 0 | 1 | µA | EN = 0 V | 5 | |
| Input current (EN) | -1 | 1 | µA | EN = VI | 5 | ||
| Output voltage line regulation | ΔVO/VO | 0.1 | %/V | VO + 1 V < VI ≤ 10 V, TJ = -40°C to 125°C | 5 | ||
| Dropout voltage | 85 | mV | IO = 50 mA, TJ = -40°C to 125°C | 5 | |||
| Dropout voltage | 170 | mV | IO = 100 mA, TJ = -40°C to 125°C | 5 | |||
| Output voltage (5-V version) | VO | 5 | V | TJ = 25°C, 6 V < VIN < 10 V | 4 | ||
| Quiescent current (GND current) | 17 | µA | EN = 0 V, 0 mA < IO < 100 mA, TJ = 25°C | 5 | |||
| Standby current | 1 | µA | EN = VI, 2.7 < VI < 10 V | 5 | |||
| Load regulation | 12 | mV | EN = 0 V, IO = 0 to 100 mA, TJ = 25°C | 5 | |||
| Output voltage line regulation | ΔVO/VO | 0.04 | %/V | VO + 1 V < VI ≤ 10 V, TJ = 25°C | 5 | ||
| Output noise voltage | 190 | µVrms | BW = 300 Hz to 50 kHz, Co = 10 µF, TJ = 25°C | 5 | |||
| Power supply ripple rejection | 60 | dB | f = 1 kHz, Co = 10 µF, TJ = 25°C | 5 | |||
| Dropout voltage | 35 | mV | IO = 50 mA, TJ = 25°C | 5 | |||
| Dropout voltage | 71 | mV | IO = 100 mA, TJ = 25°C | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 204.6 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 117.5 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 34.4 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 11.8 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 33.5 | °C/W | 4 | |||
| Junction-to-ambient thermal resistance (low-K board) | RθJA | 259 | °C/W | Low K (1s) JEDEC board, Dissipation Ratings table | 6 | ||
| Junction-to-ambient thermal resistance (high-K board) | RθJA | 180 | °C/W | High K (2s2p) JEDEC board, Dissipation Ratings table | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS76950QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps76950qdbvrq1-etched.step/tps76950qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76950qdbvrq1.step/tps76950qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
0a0df92e99930058, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).