component
CMT2210LHESR
Public Made by Adomby adom
hoperf.com Others, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCMT2210LHESR
hoperf.com · Others · SOP-8
CMT2210LHESR from hoperf.com, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the receiver. |
| 2 | RFIN | input | RF signal input to the internal LNA, matched to 50 Ω with a low-cost external matching network. |
| 3 | VDD5V | power_in | Power supply input; with VDD5V and VDDL left open the supply range is 3.0-5.5 V, and with them shorted it is 2.0-3.6 V. |
| 4 | VDDL | power_out | Power output pin that is shorted to VDD5V for 2.0-3.6 V operation and left open for 3.0-5.5 V operation. |
| 5 | DATA | output | Demodulated OOK receive data output. |
| 6 | NC | unconnected | No connection; leave floating. |
| 7 | NC | unconnected | No connection; leave floating. |
| 8 | XIN | input | Crystal oscillator input, or external reference clock input through a DC-blocking capacitor at 0.3-0.7 V peak-to-peak; the crystal is 19.7029 MHz (315 MHz) or 27.1412 MHz (433.92 MHz). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | hoperf.com |
| Package | SOP-8 |
| Category | Others |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage (VDD5V and VDDL open) | VDD | 3 | 5.5 | V | VDD5V 与 VDDL 开路，温度范围在-40℃至+85℃ | 5 | |
| Operating supply voltage (VDD5V and VDDL shorted) | VDD | 2 | 3.6 | V | VDD5V 与 VDDL 短路，温度范围在-40℃至+85℃ | 5 | |
| Operating temperature | TOP | -40 | 85 | ℃ | 5 | ||
| Supply voltage (VDD5V and VDDL not shorted) | VDD | -0.3 | 5.5 | V | VDD5V 与 VDDL 不短接 | 5 | |
| Supply voltage (VDD5V and VDDL shorted) | VDD | -0.3 | 3.6 | V | VDD5V 与 VDDL 短接 | 5 | |
| Interface voltage | VIN | -0.3 | V | upper limit printed as VDD + 0.3 V | 5 | ||
| Junction temperature | TJ | -40 | 125 | ℃ | 5 | ||
| Storage temperature | TSTG | -50 | 150 | ℃ | 5 | ||
| Soldering temperature | TSDR | 255 | ℃ | 持续至少 30 秒 | 5 | ||
| ESD rating, human body model (HBM) | ESD HBM | -2 | 2 | kV | 人体模型(HBM) | 5 | |
| Latch-up current | -100 | 100 | mA | @ 85 ℃ | 5 | ||
| Data rate | DR | 1 | 5 | kbps | 6 | ||
| Saturation input level | PLVL | 10 | dBm | 6 | |||
| Crystal frequency accuracy | -20 | 20 | ppm | 6 | |||
| Crystal equivalent series resistance | Rm | 60 | Ω | 6 | |||
| External reference clock amplitude (XIN, peak-to-peak) | 0.3 | 0.7 | V | 外部时钟信号的峰峰值要求；通过耦合电容驱动 XIN | 6 |
CAD (KiCad official)
- Symbol:
CMT2210LHESR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cmt2210lhesr-etched.step/cmt2210lhesr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cmt2210lhesr.step/cmt2210lhesr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: hoperf.com datasheet (19 pp, sha256
ccfd4e0c1e639ad6, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).