3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F722RET6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
STM32F722RET6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup supply for the RTC, backup registers and backup SRAM; must be tied to VDD when internal reset is OFF. |
| 2 | PC13 | bidirectional | 5 V-tolerant I/O powered through the power switch (3 mA sink limit), output speed max 2 MHz with 30 pF load, not to be used as a current source; additional functions RTC_TAMP1/RTC_TS/RTC_OUT, WKUP4. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O (except in oscillator mode) powered through the power switch, 2 MHz/30 pF output limit; additional function OSC32_IN for the 32 kHz oscillator. |
| 4 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O (except in oscillator mode) powered through the power switch, 2 MHz/30 pF output limit; additional function OSC32_OUT for the 32 kHz oscillator. |
| 5 | PH0-OSC_IN | bidirectional | I/O FT (5 V-tolerant except in oscillator mode), additional function OSC_IN for the 4-26 MHz HSE oscillator. |
| 6 | PH1-OSC_OUT | bidirectional | I/O FT (5 V-tolerant except in oscillator mode), additional function OSC_OUT for the 4-26 MHz HSE oscillator. |
| 7 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor. |
| 8 | PC0 | bidirectional | 5 V-tolerant I/O with alternate functions SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE; analog inputs ADC1/2/3_IN10. |
| 9 | PC1 | bidirectional | 5 V-tolerant I/O with alternate functions TRACED0, SPI2_MOSI/I2S2_SD, SAI1_SD_A; ADC1/2/3_IN11, RTC_TAMP3, WKUP3. |
| 10 | PC2 | bidirectional | 5 V-tolerant I/O with alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, FMC_SDNE0; ADC1/2/3_IN12. |
| 11 | PC3 | bidirectional | 5 V-tolerant I/O with alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, FMC_SDCKE0; ADC1/2/3_IN13. |
| 12 | VSSA | power_in | Analog ground supply. |
| 13 | VDDA | power_in | Analog supply, also the ADC/DAC positive reference on LQFP64 (VREF+ is bonded to VDDA on this package; Figure 14). |
| 14 | PA0-WKUP | bidirectional | 5 V-tolerant I/O with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B; ADC1/2/3_IN0, WKUP1; used as internal reset (active low) if BYPASS_REG is set to VDD in regulator OFF mode. |
| 15 | PA1 | bidirectional | 5 V-tolerant I/O with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCK_B; ADC1/2/3_IN1. |
| 16 | PA2 | bidirectional | 5 V-tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B; ADC1/2/3_IN2, WKUP2. |
| 17 | PA3 | bidirectional | 5 V-tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0; ADC1/2/3_IN3. |
| 18 | VSS | power_in | Digital ground supply. |
| 19 | VDD | power_in | Digital supply, 1.7 to 3.6 V application supply. |
| 20 | PA4 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF; ADC1/2_IN4, DAC_OUT1. |
| 21 | PA5 | bidirectional | TTa I/O with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, OTG_HS_ULPI_CK; ADC1/2_IN5, DAC_OUT2. |
| 22 | PA6 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1; ADC1/2_IN6. |
| 23 | PA7 | bidirectional | 5 V-tolerant I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, TIM14_CH1, FMC_SDNWE; ADC1/2_IN7. |
| 24 | PC4 | bidirectional | 5 V-tolerant I/O with I2S1_MCK, FMC_SDNE0; ADC1/2_IN14. |
| 25 | PB0 | bidirectional | 5 V-tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, OTG_HS_ULPI_D1; ADC1/2_IN8. |
| 26 | PB1 | bidirectional | 5 V-tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2; ADC1/2_IN9. |
| 27 | PB2 | bidirectional | 5 V-tolerant I/O with SAI1_SD_A, SPI3_MOSI/I2S3_SD, QUADSPI_CLK. |
| 28 | PB10 | bidirectional | 5 V-tolerant I/O (I2C Fm+ option) with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3. |
| 29 | PB11 | bidirectional | 5 V-tolerant I/O (I2C Fm+ option) with TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4. |
| 30 | VCAP_1 | passive | Connection for the external capacitor of the 1.2 V internal regulator. |
| 31 | VSS | power_in | Digital ground supply. |
| 32 | VDD | power_in | Digital supply, 1.7 to 3.6 V application supply. |
| 33 | PB12 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, OTG_HS_ULPI_D5, OTG_HS_ID. |
| 34 | PB13 | bidirectional | 5 V-tolerant I/O with TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, OTG_HS_ULPI_D6; additional function OTG_HS_VBUS. |
| 35 | PB14 | bidirectional | 5 V-tolerant I/O with TIM1_CH2N, TIM8_CH2N, SPI2_MISO, USART3_RTS, TIM12_CH1, SDMMC2_D0, OTG_HS_DM. |
| 36 | PB15 | bidirectional | 5 V-tolerant I/O with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, SDMMC2_D1, OTG_HS_DP. |
| 37 | PC6 | bidirectional | 5 V-tolerant I/O with TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDMMC2_D6, SDMMC1_D6. |
| 38 | PC7 | bidirectional | 5 V-tolerant I/O with TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC2_D7, SDMMC1_D7. |
| 39 | PC8 | bidirectional | 5 V-tolerant I/O with TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, SDMMC1_D0. |
| 40 | PC9 | bidirectional | 5 V-tolerant I/O (I2C Fm+ option) with MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, SDMMC1_D1. |
| 41 | PA8 | bidirectional | 5 V-tolerant I/O (I2C Fm+ option) with MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF. |
| 42 | PA9 | bidirectional | 5 V-tolerant I/O with TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX; additional function OTG_FS_VBUS. |
| 43 | PA10 | bidirectional | 5 V-tolerant I/O with TIM1_CH3, USART1_RX, OTG_FS_ID. |
| 44 | PA11 | bidirectional | 5 V-tolerant I/O with TIM1_CH4, USART1_CTS, CAN1_RX, OTG_FS_DM. |
| 45 | PA12 | bidirectional | 5 V-tolerant I/O with TIM1_ETR, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP. |
| 46 | PA13(JTMS-SWDIO) | bidirectional | 5 V-tolerant I/O, JTMS-SWDIO debug function after reset. |
| 47 | VSS | power_in | Digital ground supply. |
| 48 | VDD | power_in | Digital supply, 1.7 to 3.6 V application supply. |
| 49 | PA14(JTCK-SWCLK) | bidirectional | 5 V-tolerant I/O, JTCK-SWCLK debug function after reset. |
| 50 | PA15(JTDI) | bidirectional | 5 V-tolerant I/O, JTDI after reset, with TIM2_CH1/ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, UART4_RTS. |
| 51 | PC10 | bidirectional | 5 V-tolerant I/O with SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2. |
| 52 | PC11 | bidirectional | 5 V-tolerant I/O with SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3. |
| 53 | PC12 | bidirectional | 5 V-tolerant I/O with TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDMMC1_CK. |
| 54 | PD2 | bidirectional | 5 V-tolerant I/O with TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD. |
| 55 | PB3(JTDO/TRACESWO) | bidirectional | 5 V-tolerant I/O, JTDO/TRACESWO after reset, with TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2. |
| 56 | PB4(NJTRST) | bidirectional | 5 V-tolerant I/O, NJTRST after reset, with TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS/I2S2_WS, SDMMC2_D3. |
| 57 | PB5 | bidirectional | 5 V-tolerant I/O with TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, OTG_HS_ULPI_D7, FMC_SDCKE1. |
| 58 | PB6 | bidirectional | 5 V-tolerant I/O (I2C Fm+ option) with TIM4_CH1, I2C1_SCL, USART1_TX, QUADSPI_BK1_NCS, FMC_SDNE1. |
| 59 | PB7 | bidirectional | 5 V-tolerant I/O (I2C Fm+ option) with TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL. |
| 60 | BOOT0 | input | Dedicated BOOT pin; additional function VPP. |
| 61 | PB8 | bidirectional | 5 V-tolerant I/O (I2C Fm+ option) with TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, SDMMC2_D4, SDMMC1_D4. |
| 62 | PB9 | bidirectional | 5 V-tolerant I/O (I2C Fm+ option) with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDMMC2_D5, SDMMC1_D5. |
| 63 | VSS | power_in | Digital ground supply. |
| 64 | VDD | power_in | Digital supply, 1.7 to 3.6 V application supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
CAD (KiCad official)
- Symbol:
STM32F722RET6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32f722ret6-etched.step/stm32f722ret6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f722ret6.step/stm32f722ret6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (229 pp, sha256
a24e9821ae55e8ba, retrieved 2026-11-10, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).