3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNDP3811KC
NDP · LED Drivers · SOP-8
NDP3811KC from NDP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input for the step-down LED driver, with a supply range of 7 V to 100 V and an absolute maximum VIN-to-GND rating of -0.3 to 105 V. |
| 2 | DIM | input | PWM and analog dimming input: the chip turns off below 0.1 V, LED current scales from 0% to 100% between 0.1 V and 1.5 V, PWM signal amplitude must exceed 1.5 V, the pin must not be left floating, and the absolute maximum rating is -0.3 to 7 V. |
| 3 | VDD | power_out | Internal power supply pin (called VCC in the electrical characteristics), with a VCC UVLO threshold of 6.5 V rising and 0.4 V hysteresis, a VCC of 5.7 V to 6.5 V with DIM = 3.5 V, and an absolute maximum VCC-to-GND rating of -0.3 to +7 V. |
| 4 | CS | input | Current-sense input connected to a sense resistor to GND to measure the FET current, regulating the average sense voltage at 280 mV (270 mV to 290 mV) with an absolute maximum CS-to-GND rating of 0.3 to +7 V as printed. |
| 5 | SW | output | Power switch node (MOSFET drain/switch output) with a 100 V MOSFET breakdown voltage (BVDSS) and 420 mΩ maximum-listed on-resistance (RDSON) as stated in the electrical characteristics. |
| 6 | SW | output | Power switch node, listed in the pin table together with pin 5 as '5.6 SW Power switch', sharing the same 100 V BVDSS and 420 mΩ RDSON ratings. |
| 7 | RT | passive | Off-time setting pin: connect a resistor to GND, with 100 kΩ to 300 kΩ recommended for most applications, and an absolute maximum RT-to-GND rating of -0.3 to +7 V. |
| 8 | GND | power_in | Ground reference for the device, including the CS sense resistor and RT resistor connections. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NDP |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | VIN | -0.3 | 105 | V | 2 | ||
| CS to GND | CS | 0.3 | 7 | V | 2 | ||
| VCC to GND | VCC | -0.3 | 7 | V | 2 | ||
| DIM to GND | DIM | -0.3 | 7 | V | 2 | ||
| RT to GND | RT | -0.3 | 7 | V | 2 | ||
| Input voltage | VIN | 7 | 100 | V | 3 | ||
| Quiescent supply current | IQ | 0.4 | 0.5 | mA | No Switching | 3 | |
| VCC voltage | Vcc | 5.7 | 6.5 | V | DIM = 3.5V | 3 | |
| Average current sense | Vcs | 270 | 280 | 290 | mV | DIM = 3.5V | 3 |
| DIM voltage range | VDIM | 0.1 | 1.5 | V | VDIM Rising | 3 | |
| Min recommended PWM dimming frequency | FPWMmin | 0.1 | kHz | 3 | |||
| Max recommended PWM dimming frequency | FPWMmax | 20 | kHz | 3 | |||
| Minimum off time | TOFF_MIN | 0.6 | uS | 3 | |||
| Maximum off time | TOFF_MAX | 50 | uS | 3 | |||
| Switching frequency (recommended, most applications) | 100 | 300 | kHz | 5 | |||
| RT timing resistor (recommended, most applications) | RT | 100 | 300 | K | 5 | ||
| VCC UVLO threshold | VUVLOTH | 6.5 | V | VCC Rising | 3 | ||
| VCC UVLO hysteresis | VUVLOHYS | 0.4 | V | 3 | |||
| Short circuit hiccup time | THICCUP | 500 | mS | 3 | |||
| MOSFET breakdown | BVDSS | 100 | V | 3 | |||
| MOSFET ON resistance | RDSON | 420 | mΩ | 3 | |||
| Thermal shutdown threshold | Temp | 150 | °C | Rising | 3 | ||
| Thermal shutdown hysteresis | TSH | 30 | °C | 3 | |||
| Junction to ambient thermal resistance | RθJA | 90 | °C/W | 2 | |||
| Junction to board thermal resistance | RθJB | 60 | °C/W | 2 | |||
| Junction to case thermal resistance | RθJC | 42 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
NDP3811KC - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ndp3811kc-etched.step/ndp3811kc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ndp3811kc.step/ndp3811kc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NDP datasheet (6 pp, sha256
523d1b0694490971, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).