3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74HCU04APWR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · TSSOP-14
SN74HCU04APWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Input of inverter 1; input voltage must stay between 0 and VCC and input current is 1 µA max. |
| 2 | 1Y | output | Output of inverter 1 (Y = A); can drive up to 10 LSTTL loads with ±4 mA drive at 5 V. |
| 3 | 2A | input | Input of inverter 2; input voltage must stay between 0 and VCC and input current is 1 µA max. |
| 4 | 2Y | output | Output of inverter 2 (Y = A); can drive up to 10 LSTTL loads with ±4 mA drive at 5 V. |
| 5 | 3A | input | Input of inverter 3; input voltage must stay between 0 and VCC and input current is 1 µA max. |
| 6 | 3Y | output | Output of inverter 3 (Y = A); can drive up to 10 LSTTL loads with ±4 mA drive at 5 V. |
| 7 | GND | power_in | Ground reference for all six inverters. |
| 8 | 4Y | output | Output of inverter 4 (Y = A); can drive up to 10 LSTTL loads with ±4 mA drive at 5 V. |
| 9 | 4A | input | Input of inverter 4; input voltage must stay between 0 and VCC and input current is 1 µA max. |
| 10 | 5Y | output | Output of inverter 5 (Y = A); can drive up to 10 LSTTL loads with ±4 mA drive at 5 V. |
| 11 | 5A | input | Input of inverter 5; input voltage must stay between 0 and VCC and input current is 1 µA max. |
| 12 | 6Y | output | Output of inverter 6 (Y = A); can drive up to 10 LSTTL loads with ±4 mA drive at 5 V. |
| 13 | 6A | input | Input of inverter 6; input voltage must stay between 0 and VCC and input current is 1 µA max. |
| 14 | VCC | power_in | Supply voltage, 2 V to 6 V recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Logic |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2 | 5 | 6 | V | 2 | |
| High-level input voltage | VIH | 1.7 | V | VCC = 2 V | 2 | ||
| High-level input voltage | VIH | 3.6 | V | VCC = 4.5 V | 2 | ||
| High-level input voltage | VIH | 4.8 | V | VCC = 6 V | 2 | ||
| Low-level input voltage | VIL | 0.5 | V | VCC = 2 V | 2 | ||
| Low-level input voltage | VIL | 1.35 | V | VCC = 4.5 V | 2 | ||
| Low-level input voltage | VIL | 1.8 | V | VCC = 6 V | 2 | ||
| Input voltage | VI | 0 | V | 2 | |||
| Output voltage | VO | 0 | V | 2 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 2 | ||
| Supply voltage range | VCC | -0.5 | 7 | V | 2 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 2 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 2 | |
| Continuous output current | IO | -25 | 25 | mA | VO = 0 to VCC | 2 | |
| Continuous current through VCC or GND | -50 | 50 | mA | 2 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Package thermal impedance PW package | θJA | 113 | °C/W | PW package, JESD 51-7 | 2 | ||
| High-level output voltage | VOH | 1.8 | V | IOH = -20 µA, VI = VCC or GND, VCC = 2 V | 3 | ||
| High-level output voltage | VOH | 4 | V | IOH = -20 µA, VI = VCC or GND, VCC = 4.5 V | 3 | ||
| High-level output voltage | VOH | 5.5 | V | IOH = -20 µA, VI = VCC or GND, VCC = 6 V | 3 | ||
| High-level output voltage | VOH | 3.84 | V | IOH = -4 mA, VCC = 4.5 V | 3 | ||
| High-level output voltage | VOH | 5.34 | V | IOH = -5.2 mA, VCC = 6 V | 3 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 20 µA, VI = VCC or GND, VCC = 2 V | 3 | ||
| Low-level output voltage | VOL | 0.5 | V | IOL = 20 µA, VI = VCC or GND, VCC = 4.5 V | 3 | ||
| Low-level output voltage | VOL | 0.33 | V | IOL = 4 mA, VCC = 4.5 V | 3 | ||
| Input current | II | -1000 | 1000 | nA | VI = VCC or 0, VCC = 6 V | 3 | |
| Supply current | ICC | 2 | 20 | µA | VI = VCC or 0, IO = 0, VCC = 6 V | 3 | |
| Input capacitance | Ci | 3 | 10 | pF | VCC = 2 V to 6 V | 3 | |
| Propagation delay time A to Y | tpd | 100 | ns | CL = 50 pF, VCC = 2 V | 3 | ||
| Propagation delay time A to Y | tpd | 20 | ns | CL = 50 pF, VCC = 4.5 V | 3 | ||
| Propagation delay time A to Y | tpd | 17 | ns | CL = 50 pF, VCC = 6 V | 3 | ||
| Output transition time Y | tf | 95 | ns | CL = 50 pF, VCC = 2 V | 3 | ||
| Output transition time Y | tf | 19 | ns | CL = 50 pF, VCC = 4.5 V | 3 | ||
| Output transition time Y | tf | 16 | ns | CL = 50 pF, VCC = 6 V | 3 |
CAD (KiCad official)
- Symbol:
SN74HCU04APWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
sn74hcu04apwr-etched.step/sn74hcu04apwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hcu04apwr.step/sn74hcu04apwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
ff64702b1a15b7f7, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).