component
74HC4067PW-Q100J
Public Made by Adomby adom
Nexperia Analog Switches, Multiplexers, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74HC4067PW-Q100J
Nexperia · Analog Switches, Multiplexers · TSSOP-24
74HC4067PW-Q100J from Nexperia, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Z | passive | Common input/output of the SP16T switch; it connects to the selected Yn channel when E is LOW, and the voltages at Z may not exceed VCC or GND. |
| 2 | Y7 | passive | Independent input/output channel 7; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 3 | Y6 | passive | Independent input/output channel 6; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 4 | Y5 | passive | Independent input/output channel 5; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 5 | Y4 | passive | Independent input/output channel 4; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 6 | Y3 | passive | Independent input/output channel 3; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 7 | Y2 | passive | Independent input/output channel 2; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 8 | Y1 | passive | Independent input/output channel 1; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 9 | Y0 | passive | Independent input/output channel 0; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 10 | S0 | input | Address input (least significant bit) selecting the Yn channel connected to Z; CMOS level for 74HC4067-Q100 and TTL level for 74HCT4067-Q100. |
| 11 | S1 | input | Address input selecting the Yn channel connected to Z; CMOS level for 74HC4067-Q100 and TTL level for 74HCT4067-Q100. |
| 12 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 13 | S3 | input | Address input (most significant bit) selecting the Yn channel connected to Z; CMOS level for 74HC4067-Q100 and TTL level for 74HCT4067-Q100. |
| 14 | S2 | input | Address input selecting the Yn channel connected to Z; CMOS level for 74HC4067-Q100 and TTL level for 74HCT4067-Q100. |
| 15 | E | input | Active-LOW enable input; when HIGH all switches are turned off. |
| 16 | Y15 | passive | Independent input/output channel 15; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 17 | Y14 | passive | Independent input/output channel 14; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 18 | Y13 | passive | Independent input/output channel 13; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 19 | Y12 | passive | Independent input/output channel 12; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 20 | Y11 | passive | Independent input/output channel 11; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 21 | Y10 | passive | Independent input/output channel 10; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 22 | Y9 | passive | Independent input/output channel 9; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 23 | Y8 | passive | Independent input/output channel 8; switch current is limited to ±25 mA and voltages at Yn may not exceed VCC or GND. |
| 24 | VCC | power_in | Supply voltage; the datasheet specifies a wide supply range of 2.0 V to 10.0 V with an absolute maximum of 11.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-24 |
| Category | Interface |
| Pins | 24 |
CAD (KiCad official)
- Symbol:
74HC4067PW-Q100J - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
74hc4067pw-q100j-etched.step/74hc4067pw-q100j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74hc4067pw-q100j.step/74hc4067pw-q100j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (24 pp, sha256
0b90ad9ab2d19180, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).