Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RS8052XK

Jiangsu RUNIC Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOP-8

RS8052XK from Jiangsu RUNIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Op-amp channel A output. Rail-to-rail output driver, short-circuit current typically ±30 mA; output should be current-limited to ≤55 mA.
2 -INA input Inverting input, channel A. Rail-to-rail CMOS input, common-mode range -0.1 V to Vs+0.1 V (up to 5.6 V at Vs = 5.5 V); clamp current must stay ≤10 mA.
3 +INA input Noninverting input, channel A. Rail-to-rail CMOS input, common-mode range -0.1 V to Vs+0.1 V (up to 5.6 V at Vs = 5.5 V); clamp current must stay ≤10 mA.
4 V- power_in Negative (lowest) power supply. Together with V+ sets the supply span Vs = (V+) − (V−), rated 1.4 V to 5.5 V (absolute max 7 V). Typically ground in single-supply operation.
5 +INB input Noninverting input, channel B. Rail-to-rail CMOS input, common-mode range -0.1 V to Vs+0.1 V (up to 5.6 V at Vs = 5.5 V); clamp current must stay ≤10 mA.
6 -INB input Inverting input, channel B. Rail-to-rail CMOS input, common-mode range -0.1 V to Vs+0.1 V (up to 5.6 V at Vs = 5.5 V); clamp current must stay ≤10 mA.
7 OUTB output Op-amp channel B output. Rail-to-rail output driver, short-circuit current typically ±30 mA; output should be current-limited to ≤55 mA.
8 V+ power_in Positive (highest) power supply. Together with V− sets the supply span Vs = (V+) − (V−), rated 1.4 V to 5.5 V (absolute max 7 V). Bypass with 100 nF to V−.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • RS8052XK
  • RS8052XKXM
  • RS8052XKXTDE8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VS=(V+)-(V-) VS 7 V 7
Signal input pin current -10 10 mA 7
Signal output pin current -55 55 mA 7
Operating range, TA TA -40 125 °C 7
Junction, TJ TJ -40 150 °C 7
Storage, Tstg Tstg -65 150 °C 7
Supply voltage, single-supply 1.4 5.5 V Single-supply 7
Supply voltage, dual-supply 0.7 2.75 V Dual-supply, printed ±0.7 and ±2.75 7
VS Operating Voltage Range VS 1.4 5.5 V 25°C 8
IQ Quiescent Current/Amplifier IQ 670 1500 nA 25°C 8
PSRR Power-Supply Rejection Ratio PSRR 60 70 dB VS=1.4V to 5.5V, VCM=(V-)+0.5V, 25°C 8
VOS Input Offset Voltage VOS -5 1 5 mV VCM =VS/2, 25°C 8
VOS TC Input Offset Voltage Average Drift VOS TC -2.3 2.3 uV/°C VCM =VS/2, Full 8
IB Input Bias Current IB -10 1 10 pA 25°C 8
IOS Input Offset Current IOS -10 1 10 pA 25°C 8
VCM Common-Mode Voltage Range VCM -0.1 5.6 V VS= 5.5V, 25°C 8
CMRR Common-Mode Rejection Ratio CMRR 63 75 dB VS= 5.5V, VCM=-0.1V to 4V, 25°C 8
CMRR Common-Mode Rejection Ratio CMRR 58 70 dB VS= 5.5V, VCM=-0.1V to 5.6V, 25°C 8
AOL Open-Loop Voltage Gain AOL 62 80 dB VS=1.4V, RL=50KΩ, VO=VS-0.1V, 25°C 8
AOL Open-Loop Voltage Gain AOL 65 85 dB VS=5.0V, RL=50kΩ, VO=VS-0.1V, 25°C 8
Output Swing From Rail 5 mV RL=50KΩ, 25°C 8
IOUT Output Short-Circuit Current IOUT -30 30 mA 25°C 8
Package thermal impedance θJA, SOIC-8(SOP8) θJA 110.88 °C/W SOIC-8(SOP8), JESD-51 7
SR Slew Rate SR 30 V/ms 25°C 8
GBP Gain-Bandwidth Product GBP 100 kHz 25°C 8
PM Phase Margin PM 60 ° 25°C 8
enp-p Input Voltage Noise enp-p 2.4 uVpp f = 0.1 Hz to 10 Hz, 25°C 8
en Input Voltage Noise Density en 160 nV/√Hz f = 1 kHz, 25°C 8

CAD (KiCad official)

  • Symbol: RS8052XK
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: rs8052xk-etched.step / rs8052xk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs8052xk.step / rs8052xk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (17 pp, sha256 1f92526dc39882e7, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF