3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIRF830APBF
Vishay Intertech · MOSFETs · TO-220AB
IRF830APBF from Vishay Intertech, in a TO-220AB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | G | input | Gate; gate-source voltage limit ±30 V, threshold VGS(th) 2.0 V min to 4.5 V max at ID = 250 μA. |
| 2 | D | passive | Drain (also connected to the tab); VDS 500 V max, continuous ID 5.0 A at TC = 25 °C and pulsed IDM 20 A. |
| 3 | S | passive | Source; RDS(on) 1.4 Ω max at VGS = 10 V, ID = 3.0 A, with continuous body diode current IS of 5.0 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | TO-220AB |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Drain-Source Breakdown Voltage | VDS | 500 | V | VGS = 0 V, ID = 250 μA | 2 | ||
| Gate-Source Threshold Voltage | VGS(th) | 2 | 4.5 | V | VDS = VGS, ID = 250 μA | 2 | |
| Gate-Source Leakage | IGSS | -100 | 100 | nA | VGS = ± 30 V | 2 | |
| Zero Gate Voltage Drain Current | IDSS | 25 | μA | VDS = 500 V, VGS = 0 V | 2 | ||
| Zero Gate Voltage Drain Current | IDSS | 250 | μA | VDS = 400 V, VGS = 0 V, TJ = 125 °C | 2 | ||
| Drain-Source On-State Resistance | RDS(on) | 1.4 | Ω | VGS = 10 V, ID = 3.0 A | 2 | ||
| Forward Transconductance | gfs | 2.8 | S | VDS = 50 V, ID = 3.0 A | 2 | ||
| Total Gate Charge | Qg | 24 | nC | VGS = 10 V, ID = 5.0 A, VDS = 400 V | 2 | ||
| Gate-Source Charge | Qgs | 6.3 | nC | VGS = 10 V, ID = 5.0 A, VDS = 400 V | 2 | ||
| Gate-Drain Charge | Qgd | 11 | nC | VGS = 10 V, ID = 5.0 A, VDS = 400 V | 2 | ||
| Continuous Source-Drain Diode Current | IS | 5 | A | MOSFET symbol showing integral reverse p-n junction diode | 2 | ||
| Pulsed Diode Forward Current | ISM | 20 | A | MOSFET symbol showing integral reverse p-n junction diode | 2 | ||
| Body Diode Voltage | VSD | 1.5 | V | TJ = 25 °C, IS = 5.0 A, VGS = 0 V | 2 | ||
| Body Diode Reverse Recovery Time | trr | 430 | 650 | ns | TJ = 25 °C, IF = 5.0 A, dI/dt = 100 A/μs | 2 | |
| Body Diode Reverse Recovery Charge | Qrr | 1.62 | 2.4 | μC | TJ = 25 °C, IF = 5.0 A, dI/dt = 100 A/μs | 2 | |
| Maximum Junction-to-Ambient | RthJA | 62 | °C/W | 2 | |||
| Maximum Junction-to-Case (Drain) | RthJC | 1.7 | °C/W | 2 | |||
| Drain-Source Voltage | VDS | 500 | V | TC = 25 °C | 1 | ||
| Gate-Source Voltage | VGS | -30 | 30 | V | TC = 25 °C | 1 | |
| Continuous Drain Current | ID | 5 | A | VGS at 10 V, TC = 25 °C | 1 | ||
| Continuous Drain Current | ID | 3.2 | A | VGS at 10 V, TC = 100 °C | 1 | ||
| Pulsed Drain Current | IDM | 20 | A | TC = 25 °C | 1 | ||
| Linear Derating Factor | 0.59 | W/°C | 1 | ||||
| Single Pulse Avalanche Energy | EAS | 230 | mJ | Starting TJ = 25 °C, L = 18 mH, Rg = 25 Ω, IAS = 5.0 A | 1 | ||
| Repetitive Avalanche Current | IAR | 5 | A | 1 | |||
| Repetitive Avalanche Energy | EAR | 7.4 | mJ | 1 | |||
| Maximum Power Dissipation | PD | 74 | W | TC = 25 °C | 1 | ||
| Peak Diode Recovery dV/dt | dV/dt | 5.3 | V/ns | ISD ≤ 5.0 A, dI/dt ≤ 370 A/μs, VDD ≤ VDS, TJ ≤ 150 °C | 1 | ||
| Operating Junction and Storage Temperature Range | TJ, Tstg | -55 | 150 | °C | 1 | ||
| Soldering Recommendations (Peak Temperature) | 300 | °C | for 10 s, 1.6 mm from case | 1 | |||
| VDS Temperature Coefficient | ΔVDS/TJ | 0.6 | V/°C | Reference to 25 °C, ID = 1 mA | 2 | ||
| Case-to-Sink, Flat, Greased Surface | RthCS | 0.5 | °C/W | 2 | |||
| Input Capacitance | Ciss | 620 | pF | VGS = 0 V, VDS = 25 V, f = 1.0 MHz | 2 | ||
| Output Capacitance | Coss | 93 | pF | VGS = 0 V, VDS = 25 V, f = 1.0 MHz | 2 | ||
| Reverse Transfer Capacitance | Crss | 4.3 | pF | VGS = 0 V, VDS = 25 V, f = 1.0 MHz | 2 | ||
| Output Capacitance | Coss | 886 | pF | VGS = 0 V; VDS = 1.0 V, f = 1.0 MHz | 2 | ||
| Output Capacitance | Coss | 27 | pF | VGS = 0 V; VDS = 400 V, f = 1.0 MHz | 2 | ||
| Effective Output Capacitance | Coss eff. | 39 | pF | VGS = 0 V; VDS = 0 V to 400 V | 2 | ||
| Turn-On Delay Time | td(on) | 10 | ns | VDD = 250 V, ID = 5.0 A, Rg = 14 Ω, RD = 49 Ω | 2 | ||
| Rise Time | tr | 21 | ns | VDD = 250 V, ID = 5.0 A, Rg = 14 Ω, RD = 49 Ω | 2 | ||
| Turn-Off Delay Time | td(off) | 21 | ns | VDD = 250 V, ID = 5.0 A, Rg = 14 Ω, RD = 49 Ω | 2 | ||
| Fall Time | tf | 15 | ns | VDD = 250 V, ID = 5.0 A, Rg = 14 Ω, RD = 49 Ω | 2 |
CAD (KiCad official)
- Symbol:
IRF830APBF - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220AB (KiCad packages3D, STEP)
- 3D model files:
irf830apbf-etched.step/irf830apbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);irf830apbf.step/irf830apbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (9 pp, sha256
0b238432a65dde04, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).