Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA185A4IDRLR

Texas Instruments · Current Sense Amplifiers · SOT-563

INA185A4IDRLR from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output voltage of the current-sense amplifier.
2 GND power_in Analog ground.
3 IN+ input Current-sense amplifier positive input; for high-side applications connect to the bus-voltage side of the sense resistor, and for low-side applications connect to the load side of the sense resistor.
4 IN- input Current-sense amplifier negative input; for high-side applications connect to the load side of the sense resistor, and for low-side applications connect to the ground side of the sense resistor.
5 REF input Reference input.
6 VS power_in Power supply, 2.7 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-563
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 6 V Absolute maximum, VS supply voltage 4
Differential input voltage (VIN+)-(VIN-) -26 26 V Analog inputs IN+, IN-, differential 4
Common-mode input voltage (absolute maximum) -0.3 26 V Common-mode, min printed as GND - 0.3 4
Reference voltage VREF -0.3 V Min printed as GND - 0.3; max printed as VS + 0.3 4
Output voltage VOUT -0.3 V Min printed as GND - 0.3; max printed as VS + 0.3 4
Operating temperature (absolute maximum) TA -55 150 °C Absolute maximum, operating free-air temperature 4
Junction temperature TJ 150 °C Absolute maximum 4
Storage temperature Tstg -65 150 °C Absolute maximum 4
Common-mode input voltage VCM -0.2 12 26 V Recommended operating 4
Operating supply voltage VS 2.7 5 5.5 V Recommended operating 4
Operating free-air temperature TA -40 125 125 °C Recommended operating range; printed NOM column shows 125 4
Common-mode rejection ratio A4 CMRR 106 120 dB VIN+ = 0 V to 26 V, VSENSE = 0 mV, TA = -40°C to +125°C 5
Offset voltage RTI, VIN+ = 0 V (A2, A3, A4) VOS -55 5 55 μV VSENSE = 0 mV, VIN+ = 0 V 5
Offset voltage RTI, VIN+ = 12 V (A4) VOS -100 25 100 μV VSENSE = 0 mV, VIN+ = 12 V 5
Power supply rejection ratio RTI PSRR -30 8 30 μV/V VS = 2.7 V to 5.5 V, VIN+ = 12 V, VSENSE = 0 mV 5
Input bias current IIB -6 μA VSENSE = 0 mV, VCM = 0 V 5
Input bias current IIB 75 μA VSENSE = 0 mV 5
Input offset current IIO -0.05 0.05 μA VSENSE = 0 mV 5
Gain error A4 EG -0.25 0.07 0.25 % VOUT = 0.5 V to VS, 0.5 V, TA = -40°C to +125°C 5
Nonlinearity error -0.01 0.01 % VOUT = 0.5 V to VS, 0.5 V 5
Swing to VS (V+ minus printed amount) VSP -0.026 -0.02 V RL = 10 kΩ to GND, TA = -40°C to +125°C; value printed as (V+), x 5
Swing to GND VSN 0.0005 0.0035 V RL = 10 kΩ to GND, VIN+, VIN- = -10mV, TA = -40°C to +125°C 5
Zero current swing to GND (A2, A3, A4) VSG 0.0005 0.012 V RL = Open, VIN+, VIN- = 0mV, VREF = 0 V, TA = -40°C to +125°C 5
Offset drift RTI dVOS/dT 0.2 0.5 μV/°C VSENSE = 0 mV, TA = -40°C to +125°C 5
Gain error drift 1.5 8 ppm/°C TA = -40°C to +125°C 5
Maximum capacitive load 1 nF No sustained oscillation 5
Quiescent current IQ 200 260 μA VSENSE = 0 mV 5
Quiescent current over temperature IQ 300 μA VSENSE = 0 mV, TA = -40°C to +125°C 5
Gain A4 devices G 200 V/V A4 devices 5
Bandwidth A4 devices BW 105 kHz CLOAD = 10 pF 5
Slew rate SR 2 V/μs 5
Voltage noise density 40 nV/√Hz 5
Junction-to-ambient thermal resistance (DRL) RθJA 230.9 °C/W DRL (SOT-563, 6 pins) 4
Junction-to-case (top) thermal resistance (DRL) RθJC(top) 94.1 °C/W DRL (SOT-563, 6 pins) 4
Junction-to-board thermal resistance (DRL) RθJB 112.8 °C/W DRL (SOT-563, 6 pins) 4
Junction-to-top characterization parameter (DRL) ψJT 3.8 °C/W DRL (SOT-563, 6 pins) 4
Junction-to-board characterization parameter (DRL) ψJB 112.1 °C/W DRL (SOT-563, 6 pins) 4

CAD (KiCad official)

  • Symbol: INA185A4IDRLR
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)
  • 3D model files: ina185a4idrlr-etched.step / ina185a4idrlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina185a4idrlr.step / ina185a4idrlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 d1b65f23841d266c, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF