Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

VT1101R

VIBRATION · RFID ICs · QFN-20(4x4)

VT1101R from VIBRATION, in a QFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCK input SPI serial interface clock input pin; operates at maximum frequency of 6.5 MHz
2 GDO1 tri_state SPI serial interface data output (SO); tri-state output that shares SO function with SPI interface
3 GDO2 output Digital test output pin; programmable general-purpose digital output or test signal
4 DV33 power_in Digital power supply pin; supply voltage 2.4-3.6V nominal 3.3V
5 VOUT18 power_out Digital LDO output pin; 1.8V regulated output from on-chip digital low-dropout regulator
6 GDO0 output Analog test output pin; programmable general-purpose output with default XOSC/192 clock frequency
7 CSN input SPI chip select input pin; active low signal for enabling SPI transactions
8 AV33 power_in Analog power supply pin; 3.3V supply voltage for analog circuits
9 XI input Crystal oscillator input pin; connects to external 26 MHz crystal oscillator with load capacitance 8-20 pF
10 XO output Crystal oscillator output pin; connects to external 26 MHz crystal oscillator with load capacitance 8-20 pF
11 AV33 power_in Analog power supply pin; 3.3V supply voltage for analog circuits
12 PA_OUT output Power amplifier RF output pin; provides transmit RF output with output impedance 35−j3.4 Ω at 433 MHz
13 RF_INP input RF receiver differential input (positive); receives RF signals with differential input impedance 180−j110 Ω at 433 MHz
14 RF_INN input RF receiver differential input (negative); receives RF signals with differential input impedance 180−j110 Ω at 433 MHz
15 AV33 power_in Analog power supply pin; 3.3V supply voltage for analog circuits
16 GND power_in Analog ground reference pin
17 RFE passive RF impedance reference resistor connection pin; external component connection for RF matching network
18 DV33 power_in Digital power supply pin; supply voltage 2.4-3.6V nominal 3.3V
19 GND power_in Ground reference pin
20 MOSI input SPI serial interface data input pin; receives serial data from master microcontroller
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer VIBRATION
Package QFN-20(4x4)
Category RF And Wireless
Pins 21

CAD (KiCad official)

  • Symbol: VT1101R
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20(4x4) (KiCad packages3D, STEP)
  • 3D model files: vt1101r-etched.step / vt1101r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vt1101r.step / vt1101r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: VIBRATION datasheet (36 pp, sha256 de7ca298129a9570, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF