component
LM22680QMR-ADJ
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM22680QMR-ADJ
Texas Instruments · DC-DC Converters · SO-8
LM22680QMR-ADJ from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | input | Bootstrap input that provides the gate voltage for the high-side NFET. |
| 2 | SS | output | Soft-start pin, used to increase soft-start time by adding an external capacitor. |
| 3 | RT/SYNC | input | Oscillator mode control pin that sets the switching frequency adjustment and synchronization mode, per the Switching Frequency Adjustment and Synchronization section. |
| 4 | FB | input | Feedback input to the regulator. |
| 5 | EN | input | Enable pin used to control regulator start-up and shut-down, per the Precision Enable and UVLO section. |
| 6 | GND | power_in | System ground pin. |
| 7 | VIN | power_in | Input voltage pin that supplies the regulator; recommended VIN supply range is 4.5 V to 42 V (absolute maximum VIN to GND is 43 V, page 4). |
| 8 | SW | output | Switch pin that provides the switching output of the regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM22680QMR-ADJ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm22680qmr-adj-etched.step/lm22680qmr-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm22680qmr-adj.step/lm22680qmr-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
5e599d39ac00f907, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).