Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SGM8743YN5G

SGMICRO · Comparators · SOT-23-5

SGM8743YN5G from SGMICRO, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Comparator output, push-pull, swinging within 195mV of the rails with 4mA output current and requiring no external pull-up or pull-down.
2 -VS power_in Negative supply rail; the device operates from 2.7V to 5.5V single supply (+VS to -VS), with absolute maximum supply of 6V.
3 +IN input Non-inverting comparator input; the common-mode input range is -0.1V to (+VS) + 0.1V, and external resistors here can add hysteresis.
4 -IN input Inverting comparator input; with +IN fixed, varying -IN inverts the output, and voltages must stay within the -0.1V to (+VS) + 0.1V common-mode range.
5 +VS power_in Positive supply rail, to be decoupled with a 0.1µF to 4.7µF ceramic capacitor placed as close to the pin as possible; supply range is 2.7V to 5.5V.

Key specifications

Parameter Value
Manufacturer SGMICRO
Package SOT-23-5
Category Amplifiers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Supply Voltage VS 2.7 5.5 V 3
Input Common Mode Voltage Range VCM -0.1 V 3
Input Offset Voltage VOS 0.8 4.9 mV VS = 5V, VCM = 0V 3
Input Offset Voltage VOS 5.6 mV -40℃ ≤ TA ≤ +85℃ 3
Output Short-Circuit Current (source) ISOURCE 23.5 35 mA VS = 5V, Out to VS/2 3
Output Short-Circuit Current (source) ISOURCE 19.5 mA -40℃ ≤ TA ≤ +85℃ 3
Output Short-Circuit Current (sink) ISINK -25 -31 mA VS = 5V, Out to VS/2 3
Output Short-Circuit Current (sink) ISINK -20 mA -40℃ ≤ TA ≤ +85℃ 3
Common Mode Rejection Ratio CMRR 60 77 dB VS = 5V, VCM = 0V to 5V 3
Common Mode Rejection Ratio CMRR 57 dB -40℃ ≤ TA ≤ +85℃ 3
Power Supply Rejection Ratio PSRR 56 74 dB VCM = 0V, VS = 2.7V to 5.5V 3
Power Supply Rejection Ratio PSRR 51 dB -40℃ ≤ TA ≤ +85℃ 3
Output Voltage Swing from Rail (high) VOH 195 275 mV VS = 5V, IOUT = 4mA 3
Output Voltage Swing from Rail (high) VOH 308 mV -40℃ ≤ TA ≤ +85℃ 3
Output Voltage Swing from Rail (low) VOL 188 245 mV VS = 5V, IOUT = -4mA 3
Output Voltage Swing from Rail (low) VOL 277 mV -40℃ ≤ TA ≤ +85℃ 3
Supply Current (VS = 3V) IS 1.3 1.7 mA VS = 3V, IOUT = 0mA 3
Supply Current (VS = 3V) IS 2 mA -40℃ ≤ TA ≤ +85℃ 3
Supply Current (VS = 5V) IS 1.4 1.9 mA VS = 5V, IOUT = 0mA 3
Supply Current (VS = 5V) IS 2.1 mA -40℃ ≤ TA ≤ +85℃ 3
Supply Voltage (+VS to -VS) 6 V +VS to -VS 2
Junction Temperature 150 ℃ 2
Storage Temperature Range -65 150 ℃ 2
Lead Temperature (Soldering) 260 ℃ Soldering, 10s 2
Operating Temperature Range -40 85 ℃ 2

CAD (KiCad official)

  • Symbol: SGM8743YN5G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sgm8743yn5g-etched.step / sgm8743yn5g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sgm8743yn5g.step / sgm8743yn5g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SGMICRO datasheet (13 pp, sha256 1c9b212bd65ab9f5, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF