Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2890IDR

Texas Instruments · Operational Amplifier · SOIC-8

OPA2890IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out A output Channel A amplifier output, which can deliver over 30mA drive current on a single +5V supply.
2 -In A input Channel A inverting input, with input voltage range of ±VS.
3 +In A input Channel A non-inverting input, with input voltage range of ±VS.
4 -VS power_in Negative supply (ground in single-supply use), with total supply of +3V to +12V single or ±1.5V to ±6V dual and an absolute maximum of ±6.5V.
5 +In B input Channel B non-inverting input, with input voltage range of ±VS.
6 -In B input Channel B inverting input, with input voltage range of ±VS.
7 Out B output Channel B amplifier output, which can deliver over 30mA drive current on a single +5V supply.
8 +VS power_in Positive supply, with total supply of +3V to +12V single or ±1.5V to ±6V dual and an absolute maximum of ±6.5V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply (absolute maximum, ±) -6.5 6.5 V Over operating free-air temperature range, unless otherwise noted. 2
Storage temperature range -65 125 °C Over operating free-air temperature range, unless otherwise noted. 2
Maximum junction temperature (TJ) TJ 150 °C Over operating free-air temperature range, unless otherwise noted. 2
Minimum junction temperature: continuous operation, long-term reliability 140 °C Over operating free-air temperature range, unless otherwise noted. 2
Specified operating range: D and DGS packages -40 85 °C 4
Small-signal bandwidth, ±5V supply 60 100 MHz G = +2V/V, VO = 100mVPP 3
Small-signal bandwidth, ±5V supply 8 12 MHz G = +10V/V, VO = 100mVPP 3
Gain bandwidth product, ±5V supply 90 120 MHz G > +20V/V 3
Slew rate, ±5V supply 300 400 V/μs G = +2V/V, VO = 2V step 3
2nd harmonic distortion, ±5V supply 84 73 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω 3
2nd harmonic distortion, ±5V supply 100 83 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω 3
3rd harmonic distortion, ±5V supply 89 84 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω 3
3rd harmonic distortion, ±5V supply 94 90 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω 3
Input voltage noise, ±5V supply 8 9 nV/√Hz f > 100kHz 3
Input current noise, ±5V supply 1 1.3 pA/√Hz f > 100kHz 3
Open-loop voltage gain (AOL), ±5V supply AOL 57 62 dB VO = 0V, RL = 100Ω 3
Input offset voltage, ±5V supply -5 2 5 mV VCM = 0V 3
Average offset voltage drift, ±5V supply -35 35 35 μV/°C VCM = 0V 3
Input bias current, ±5V supply -1.6 0.1 1.6 μA VCM = 0V 3
Average input bias current drift, ±5V supply -6 5 6 nA/°C VCM = 0V 3
Input offset current, ±5V supply -350 70 350 nA VCM = 0V 3
Average input offset current drift, ±5V supply -2.5 2.5 2.5 nA/°C VCM = 0V 3
Common-mode input range (CMIR), ±5V supply CMIR -3.7 3.9 3.7 V 3
Common-mode rejection ratio (CMRR), ±5V supply CMRR 60 66 dB VCM = 0V, Input-referred 3
Output voltage swing, ±5V supply -3.9 4 3.9 V No load 3
Output voltage swing, ±5V supply -3.1 3.6 3.1 V RL = 100Ω 3
Output current, sourcing, sinking, ±5V supply -35 40 35 mA VO = 0V 3
Maximum operating voltage, ±5V supply -6 6 V 4
Maximum quiescent current, ±5V supply 2.25 2.4 mA VS = ±5V, Both channels 4
Minimum quiescent current, ±5V supply 2.1 2.25 mA VS = ±5V, Both channels 4
Power-supply rejection ratio (+PSRR), ±5V supply +PSRR 60 68 dB +VS = 4.5V to 5.5V 4
Small-signal bandwidth, +5V supply 55 90 MHz G = +2V/V, VO = 100mVPP 5
Small-signal bandwidth, +5V supply 8 12 MHz G = +10V/V, VO = 100mVPP 5
Gain bandwidth product, +5V supply 85 120 MHz G > +20V/V 5
Slew rate, +5V supply 250 350 V/μs G = +2V/V, VO = 2V step 5
2nd harmonic distortion, +5V supply 80 71 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω 5
2nd harmonic distortion, +5V supply 87 75 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω 5
3rd harmonic distortion, +5V supply 83 79 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω 5
3rd harmonic distortion, +5V supply 86 83 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω 5
Input voltage noise, +5V supply 8.1 9.1 nV/√Hz f > 100kHz 5
Input current noise, +5V supply 1.1 1.4 pA/√Hz f > 100kHz 5
Open-loop voltage gain (AOL), +5V supply AOL 55 60 dB VO = VS/2, RL = 100Ω 5
Input offset voltage, +5V supply -5 2 5 mV VCM = VS/2 5
Average offset voltage drift, +5V supply -35 35 35 μV/°C VCM = VS/2 5
Input bias current, +5V supply -1.7 0.1 1.7 μA VCM = VS/2 5
Average input bias current drift, +5V supply -6 5 6 nA/°C VCM = VS/2 5
Input offset current, +5V supply -400 70 400 nA VCM = VS/2 5
Average input offset current drift, +5V supply -2.5 2.5 2.5 nA/°C VCM = VS/2 5
Most positive input voltage, +5V supply 3.7 4 V 5
Least positive input voltage, +5V supply 1 1.3 V 5
Common-mode rejection ratio (CMRR), +5V supply CMRR 59 65 dB VCM = VS/2, Input-referred 5
Most positive output voltage, +5V supply 3.9 4.1 V No load 5
Most positive output voltage, +5V supply 3.75 3.9 V RL = 100Ω 5
Least positive output voltage, +5V supply 0.9 1.1 V No load 5
Least positive output voltage, +5V supply 1.1 1.35 V RL = 100Ω 5
Output current: sourcing, sinking, +5V supply -30 35 30 mA VO = VS/2 5
Maximum operating voltage, +5V supply 12 V 6
Maximum quiescent current, +5V supply 2.1 2.35 mA VS = +5V, Both channels 6
Minimum quiescent current, +5V supply 1.85 2.1 mA VS = +5V, Both channels 6
Thermal resistance, junction-to-ambient, D (SO-8) package θJA 100 °C/W Junction-to-ambient 4

CAD (KiCad official)

  • Symbol: OPA2890IDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa2890idr-etched.step / opa2890idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2890idr.step / opa2890idr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 5ad6fc08f585fbcf, retrieved 2026-10-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF