component
OPA2363AIRSVR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, UQFN-16(1.8x2.6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA2363AIRSVR
Texas Instruments · Operational Amplifier · UQFN-16(1.8x2.6)
OPA2363AIRSVR from Texas Instruments, in a UQFN-16(1.8x2.6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the pin may be left floating. |
| 2 | NC | unconnected | No internal connection; the pin may be left floating. |
| 3 | NC | unconnected | No internal connection; the pin may be left floating. |
| 4 | NC | unconnected | No internal connection; the pin may be left floating. |
| 5 | OUT A | output | Output of channel A; the output goes high impedance when amplifier A is disabled. |
| 6 | -IN A | input | Inverting input of channel A; the common-mode input range is (V-) - 0.1 V to (V+) + 0.1 V. |
| 7 | +IN A | input | Non-inverting input of channel A; the common-mode input range is (V-) - 0.1 V to (V+) + 0.1 V. |
| 8 | V- | power_in | Negative power supply (lowest potential); the operating supply [V+] - [V-] is 1.8 V to 5.5 V. |
| 9 | NC | unconnected | No internal connection; the pin may be left floating. |
| 10 | Enable A | input | Enable input for amplifier A; a logic high (above 75% of V+, up to 5.5 V above V-) enables the amplifier, a logic low (within 0.8 V of V-) disables it, and the pin must not be left open. |
| 11 | Enable B | input | Enable input for amplifier B; a logic high (above 75% of V+, up to 5.5 V above V-) enables the amplifier, a logic low (within 0.8 V of V-) disables it, and the pin must not be left open. |
| 12 | NC | unconnected | No internal connection; the pin may be left floating. |
| 13 | +IN B | input | Non-inverting input of channel B; the common-mode input range is (V-) - 0.1 V to (V+) + 0.1 V. |
| 14 | -IN B | input | Inverting input of channel B; the common-mode input range is (V-) - 0.1 V to (V+) + 0.1 V. |
| 15 | OUT B | output | Output of channel B; the output goes high impedance when amplifier B is disabled. |
| 16 | V+ | power_in | Positive power supply (highest potential); the operating supply [V+] - [V-] is 1.8 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-16(1.8x2.6) |
| Category | Amplifiers/Comparators |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
OPA2363AIRSVR - Footprint:
Package_DFN_QFN:UQFN-16_1.8x2.6mm_P0.4mm - 3D model: UQFN-16(1.8x2.6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm nominal UFQFPN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
opa2363airsvr-etched.step/opa2363airsvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2363airsvr.step/opa2363airsvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (65 pp, sha256
78a564cc6571e3d7, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).