3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMK00304SQE
Texas Instruments · Clock Buffers, Drivers · WQFN-32-EP(5x5)
LMK00304SQE from Texas Instruments, in a WQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | VCCOA | power_in | Power supply for Bank A output buffers, operating from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 3 | CLKoutA0 | output | Differential clock output A0; output type set by the CLKout_TYPE pins. |
| 4 | CLKoutA0* | output | Differential clock output A0 (complement); output type set by the CLKout_TYPE pins. |
| 5 | VCCOA | power_in | Power supply for Bank A output buffers, operating from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 6 | CLKoutA1 | output | Differential clock output A1; output type set by the CLKout_TYPE pins. |
| 7 | CLKoutA1* | output | Differential clock output A1 (complement); output type set by the CLKout_TYPE pins. |
| 8 | GND | power_in | Ground. |
| 9 | CLKout_TYPE0 | input | Bank A and Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 10 | VCC | power_in | Power supply for core and input buffer blocks, operating from 3.3 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each Vcc pin. |
| 11 | OSCin | input | Input for crystal; can also be driven by a XO, TCXO, or other external single-ended clock. |
| 12 | OSCout | output | Output for crystal; leave floating if OSCin is driven by a single-ended clock. |
| 13 | CLKin_SEL0 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 14 | CLKin0 | input | Universal clock input 0, differential or single-ended. |
| 15 | CLKin0* | input | Universal clock input 0 complement, differential or single-ended. |
| 16 | CLKin_SEL1 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 17 | GND | power_in | Ground. |
| 18 | CLKoutB1* | output | Differential clock output B1 (complement); output type set by the CLKout_TYPE pins. |
| 19 | CLKoutB1 | output | Differential clock output B1; output type set by the CLKout_TYPE pins. |
| 20 | VCCOB | power_in | Power supply for Bank B output buffers, operating from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 21 | CLKoutB0* | output | Differential clock output B0 (complement); output type set by the CLKout_TYPE pins. |
| 22 | CLKoutB0 | output | Differential clock output B0; output type set by the CLKout_TYPE pins. |
| 23 | VCCOB | power_in | Power supply for Bank B output buffers, operating from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 24 | GND | power_in | Ground. |
| 25 | NC | unconnected | Not connected internally; may be floated, grounded, or tied to any potential within the Supply Voltage range in the Absolute Maximum Ratings. |
| 26 | CLKin1* | input | Universal clock input 1 complement, differential or single-ended. |
| 27 | CLKin1 | input | Universal clock input 1, differential or single-ended. |
| 28 | VCC | power_in | Power supply for core and input buffer blocks, operating from 3.3 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each Vcc pin. |
| 29 | REFout | output | LVCMOS reference output; enabled by pulling REFout_EN high. |
| 30 | VCCOC | power_in | Power supply for REFout buffer, operating from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 31 | REFout_EN | input | REFout enable input, internally synchronized to the selected clock input; CMOS control input with internal pull-down resistor. |
| 32 | CLKout_TYPE1 | input | Bank A and Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-32-EP(5x5) |
| Category | RTC/Clock Chip |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
LMK00304SQE - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: WQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
lmk00304sqe-etched.step/lmk00304sqe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk00304sqe.step/lmk00304sqe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
5b65b5b004e9d84c, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).