component
SFH617A-2X006
Public Made by Adomby adom
Vishay Intertech Transistor, Photovoltaic Output Optoisolators, DIP-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSFH617A-2X006
Vishay Intertech · Transistor, Photovoltaic Output Optoisolators · DIP-4
SFH617A-2X006 from Vishay Intertech, in a DIP-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | passive | Anode of the GaAs infrared LED emitter; the LED is rated for a maximum forward current of 60 mA and a maximum reverse voltage of 6 V. |
| 2 | C | passive | Cathode of the GaAs infrared LED emitter; the LED is rated for a maximum forward current of 60 mA and a maximum reverse voltage of 6 V. |
| 3 | E | passive | Emitter of the silicon phototransistor detector; the output side is rated for a collector-emitter voltage VCEO of 70 V, an emitter-collector voltage VECO of 7 V, and a collector current of 50 mA. |
| 4 | C | passive | Collector of the silicon phototransistor detector; the output side is rated for a collector-emitter voltage VCEO of 70 V and a collector current of 50 mA (100 mA peak). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | DIP-4 |
| Category | Optoisolators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operation temperature | Tamb | -55 | 110 | °C | 2 | ||
| Collector emitter voltage | VCEO | 70 | V | 2 | |||
| Forward surge current | IFSM | 2.5 | A | tp ≤ 10 μs | 2 | ||
| Reverse voltage | VR | 6 | V | 2 | |||
| Forward current | IF | 60 | mA | 2 | |||
| LED power dissipation at 25 °C | Pdiss | 70 | mW | 2 | |||
| Emitter collector voltage | VECO | 7 | V | 2 | |||
| Collector current | IC | 50 | mA | 2 | |||
| Collector peak current | ICM | 100 | mA | tp/T = 0.5, tp ≤ 10 ms | 2 | ||
| Ouput power dissipation at 25 °C | Pdiss | 150 | mW | 2 | |||
| Storage temperature range | Tstg | -55 | 150 | °C | 2 | ||
| Soldering temperature | Tsld | 260 | °C | 2 mm from case, ≤ 10 s | 2 | ||
| Current transfer ratio, SFH617A-2 | CTR | 63 | 125 | % | IF = 10 mA, VCE = 5 V | 3 | |
| Current transfer ratio, SFH617A-2 | CTR | 22 | 45 | % | IF = 1 mA, VCE = 5 V | 3 | |
| Forward voltage | VF | 1.35 | 1.65 | V | IF = 60 mA | 2 | |
| Reverse current | IR | 0.01 | 10 | μA | VR = 6 V | 2 | |
| Collector emitter leakage current, SFH617A-2 | ICEO | 2 | 50 | nA | VCE = 10 V | 2 | |
| Collector emitter saturation voltage | VCEsat | 0.25 | 0.4 | V | IF = 10 mA, f = 1 MHz | 2 | |
| Capacitance | CO | 13 | pF | VR = 0 V, f = 1 MHz | 2 | ||
| Collector emitter capacitance | CCE | 5.2 | pF | VCE = 5 V, f = 1 MHz | 2 | ||
| Coupling capacitance | CC | 0.4 | pF | 2 | |||
| Turn-on time (non-saturated) | ton | 3 | μs | IF = 10 mA, VCC = 5 V, RL = 75 Ω | 3 | ||
| Rise time (non-saturated) | tr | 2 | μs | IF = 10 mA, VCC = 5 V, RL = 75 Ω | 3 | ||
| Turn-off time (non-saturated) | toff | 2.3 | μs | IF = 10 mA, VCC = 5 V, RL = 75 Ω | 3 | ||
| Fall time (non-saturated) | tf | 2 | μs | IF = 10 mA, VCC = 5 V, RL = 75 Ω | 3 | ||
| Cut-off frequency | fCO | 100 | kHz | IF = 10 mA, VCC = 5 V | 3 | ||
| Turn-on time (saturated), SFH617A-2 | ton | 4.2 | μs | IF = 10 mA | 3 | ||
| Rise time (saturated), SFH617A-2 | tr | 3 | μs | IF = 10 mA | 3 | ||
| Turn-off time (saturated), SFH617A-2 | toff | 23 | μs | IF = 10 mA | 3 | ||
| Fall time (saturated), SFH617A-2 | tf | 14 | μs | IF = 10 mA | 3 |
CAD (KiCad official)
- Symbol:
SFH617A-2X006 - Footprint:
Package_DIP:DIP-4_W7.62mm - 3D model: DIP-4 (KiCad packages3D, STEP)
- 3D model files:
sfh617a-2x006-etched.step/sfh617a-2x006-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sfh617a-2x006.step/sfh617a-2x006.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (9 pp, sha256
3e4ea1b1be1db6f2, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).