Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

L8001G-R20-R

UTC(Unisonic Tech) · Gate Drive ICs · SSOP-20-150mil

L8001G-R20-R from UTC(Unisonic Tech), in a SSOP-20-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VD1 output First FET drain output; the electrical characteristics give a drain voltage of 2 V typical (1.8 to 2.2 V) at ID = 10 mA.
2 VG1 output First FET gate output voltage, a negative bias with a dynamic range of -2.5 V to 0.7 V when CSUB is unloaded.
3 VD2 output Second FET drain output; the electrical characteristics give a drain voltage of 2 V typical (1.8 to 2.2 V) at ID = 10 mA.
4 VG2 output Second FET gate output voltage, a negative bias with a dynamic range of -2.5 V to 0.7 V when CSUB is unloaded.
5 VG3 output Third FET gate output voltage, a negative bias with a dynamic range of -2.5 V to 0.7 V when CSUB is unloaded.
6 VD3 output Third FET drain output; the electrical characteristics give a drain voltage of 2 V typical (1.8 to 2.2 V) at ID = 10 mA.
7 GND power_in Ground reference for the device.
8 NC unconnected No connect; the datasheet specifies no internal connection for this pin.
9 CNB1 output Oscillator output for the negative voltage generator, AC-coupled to CNB2 through a 47 nF capacitor in the typical application.
10 CNB2 input Rectifier input of the negative voltage generator, AC-coupled from CNB1 through a 47 nF capacitor in the typical application.
11 CSUB power_out Negative voltage output, bypassed with a 47 nF capacitor; the absolute maximum sink current is -500 uA.
12 RCAL1 passive Current-set resistor connection for FET drains VD1, VD2 and VD3; 8.2 kΩ was used in the electrical characteristics test conditions.
13 RCAL2 passive Current-set resistor connection for FET drains VD4, VD5 and VD6; 8.2 kΩ was used in the electrical characteristics test conditions.
14 VG6 output Sixth FET gate output voltage, a negative bias with a dynamic range of -2.5 V to 0.7 V when CSUB is unloaded.
15 VD6 output Sixth FET drain output; the electrical characteristics give a drain voltage of 2 V typical (1.8 to 2.2 V) at ID = 10 mA.
16 VG5 output Fifth FET gate output voltage, a negative bias with a dynamic range of -2.5 V to 0.7 V when CSUB is unloaded.
17 VD5 output Fifth FET drain output; the electrical characteristics give a drain voltage of 2 V typical (1.8 to 2.2 V) at ID = 10 mA.
18 VG4 output Fourth FET gate output voltage, a negative bias with a dynamic range of -2.5 V to 0.7 V when CSUB is unloaded.
19 VD4 output Fourth FET drain output; the electrical characteristics give a drain voltage of 2 V typical (1.8 to 2.2 V) at ID = 10 mA.
20 VCC power_in Supply voltage, specified at 3.3 V to 6 V, with an absolute maximum range of -0.6 V to 8 V.

Key specifications

Parameter Value
Manufacturer UTC(Unisonic Tech)
Package SSOP-20-150mil
Category Power Management ICs
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC -0.6 8 V 4
Supply Current ICC 100 mA 4
Maximum Drain Current ID 15 mA 4
Maximum CSUB Sink Current ICSUB -500 uA 4
Operating Temperature TOPR -40 80 °C 4
Storage Temperature TSTG -50 150 °C 4
Supply Voltage VCC 3.3 6 V 4
Supply Current ICC 10 mA No FET 4
Negative Voltage VSUB -3 -2.5 -1 V ISUB=0uA, VCC=6V 4
Negative Voltage VSUB -1 V ISUB=-200uA 4
Oscillator Frequency fO 200 350 800 KHz 4
Drain Current ID 8 10 12 mA 4
Drain Current Change with VCC ∆IDV 0.2 %/V VCC=3.3~6V 4
Drain Offset Current (VD1/VD2/VD3/VD4/VD5/VD6) ∆IDC 0.2 mA 4
Drain Current Change with Temp. ∆IDT 0.1 %/°C T=-40~80°C 4
Drain Voltage VD 1.8 2 2.2 V ID=10mA 4
Drain Voltage Change with VCC ∆VDV 0.5 %/V VCC=3.3~6V 4
Drain Voltage Change ∆VDT 50 ppm T=-40~80°C 4
Dynamic Gate Voltage Range VG -2.5 0.7 V Csub without loading 4
Drain Output Noise Voltage Vdn 0.05 VPP With drain bypass capacitor=10nF 4
Gate Output Noise Voltage VGN 0.03 VPP With gate bypass capacitor=10nF 4

CAD (KiCad official)

  • Symbol: L8001G-R20-R
  • Footprint: Package_SO:SSOP-20_3.9x8.7mm_P0.635mm
  • 3D model: SSOP-20-150mil (KiCad packages3D, STEP)
  • 3D model files: l8001g-r20-r-etched.step / l8001g-r20-r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l8001g-r20-r.step / l8001g-r20-r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UTC(Unisonic Tech) datasheet (6 pp, sha256 257b5e9689dced26, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF