3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM339N-HXY
HXY MOSFET · Comparators · DIP-14
LM339N-HXY from HXY MOSFET, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | Output of comparator 2; saturation voltage is 130 mV typical and 400 mV maximum at ISINK < 4.0 mA, with a sink current of at least 6.0 mA stated in the datasheet. |
| 2 | OUT1 | output | Output of comparator 1; saturation voltage is 130 mV typical and 400 mV maximum at ISINK < 4.0 mA, with a sink current of at least 6.0 mA stated in the datasheet. |
| 3 | Vcc | power_in | Positive supply pin; the absolute maximum supply voltage is 36 V, or ±18 V for dual supply, and the datasheet notes single or dual supply operation. |
| 4 | IN1(-) | input | Inverting input of comparator 1; input common-mode range is 0 to Vcc-1.5 V (0 to Vcc-2.0 V over 0 to 70 °C) and input bias current is 25 nA typical, 250 nA maximum. |
| 5 | IN1(+) | input | Non-inverting input of comparator 1; input common-mode range is 0 to Vcc-1.5 V (0 to Vcc-2.0 V over 0 to 70 °C) and input bias current is 25 nA typical, 250 nA maximum. |
| 6 | IN2(-) | input | Inverting input of comparator 2; input common-mode range is 0 to Vcc-1.5 V (0 to Vcc-2.0 V over 0 to 70 °C) and input bias current is 25 nA typical, 250 nA maximum. |
| 7 | IN2(+) | input | Non-inverting input of comparator 2; input common-mode range is 0 to Vcc-1.5 V (0 to Vcc-2.0 V over 0 to 70 °C) and input bias current is 25 nA typical, 250 nA maximum. |
| 8 | IN3(-) | input | Inverting input of comparator 3; input common-mode range is 0 to Vcc-1.5 V (0 to Vcc-2.0 V over 0 to 70 °C) and input bias current is 25 nA typical, 250 nA maximum. |
| 9 | IN3(+) | input | Non-inverting input of comparator 3; input common-mode range is 0 to Vcc-1.5 V (0 to Vcc-2.0 V over 0 to 70 °C) and input bias current is 25 nA typical, 250 nA maximum. |
| 10 | IN4(-) | input | Inverting input of comparator 4; input common-mode range is 0 to Vcc-1.5 V (0 to Vcc-2.0 V over 0 to 70 °C) and input bias current is 25 nA typical, 250 nA maximum. |
| 11 | IN4(+) | input | Non-inverting input of comparator 4; input common-mode range is 0 to Vcc-1.5 V (0 to Vcc-2.0 V over 0 to 70 °C) and input bias current is 25 nA typical, 250 nA maximum. |
| 12 | GND | power_in | Ground reference pin for the device. |
| 13 | OUT4 | output | Output of comparator 4; saturation voltage is 130 mV typical and 400 mV maximum at ISINK < 4.0 mA, with a sink current of at least 6.0 mA stated in the datasheet. |
| 14 | OUT3 | output | Output of comparator 3; saturation voltage is 130 mV typical and 400 mV maximum at ISINK < 4.0 mA, with a sink current of at least 6.0 mA stated in the datasheet. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | DIP-14 |
| Category | Operational Amplifier/Comparator |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage Vcc (or ±18 V dual supply) | Vcc | 36 | V | Tamb=25°C unless noted; dual supply ±18 V as printed | 2 | ||
| Input differential voltage range | VIDR | 36 | V | Tamb=25°C unless noted | 2 | ||
| Input common-mode voltage range | VICMR | -0.3 | V | Tamb=25°C unless noted; max printed as Vcc | 2 | ||
| Output current | ISC | 50 | mA | Tamb=25°C unless noted | 2 | ||
| Power dissipation | PD | 1 | W | Tamb=25°C; derate 8 mW per °C above 25°C | 2 | ||
| Operating ambient temperature | Tamb | 0 | 70 | °C | 2 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 2 | ||
| Output sink current | ISINK | 6 | 16 | mA | VIN(-)>1.0V, VIN(+)=0V, Vo<1.5V; Vcc=5V, Tamb=25°C | 3 | |
| Output saturation voltage | VSAT | 130 | 400 | mV | VIN(-)>1.0V, VIN(+)=0V, ISINK<4.0mA; 25°C | 3 | |
| Output saturation voltage | VSAT | 700 | mV | VIN(-)>1.0V, VIN(+)=0V, ISINK<4.0mA; 0°C≤Ta≤70°C | 3 | ||
| Output leakage current | IOL | 1000 | nA | VIN(+)>1.0V, VIN(-)=0V, Vo=30V; 0°C≤Ta≤70°C | 3 | ||
| Input offset voltage | VIO | 5 | 9 | mV | 0°C≤Ta≤70°C | 3 | |
| Input offset current | IIO | 50 | 150 | nA | 0°C≤Ta≤70°C | 3 | |
| Input bias current | IIB | 25 | 250 | nA | Tamb=25°C | 3 | |
| Input bias current | IIB | 400 | nA | 0°C≤Ta≤70°C | 3 | ||
| Input common-mode voltage range | VICR | 0 | V | Tamb=25°C; max printed as Vcc-1.5 | 3 | ||
| Supply current | Icc | 0.8 | 2 | mA | RL=∞ | 3 | |
| Supply current | Icc | 1 | 2.5 | mA | RL=∞, Vcc=30V | 3 | |
| Voltage gain | Gv | 50 | 200 | V/mV | RL>15K, Vcc=15V | 3 | |
| Input offset voltage | VIO | 2 | mV | Tamb=25°C | 3 | ||
| Input offset current | IIO | 5 | nA | Tamb=25°C | 3 | ||
| Output leakage current | IOL | 0.1 | nA | VIN(+)>1.0V, VIN(-)=0V, Vo=5.0V; Tamb=25°C | 3 | ||
| Large signal response time | tRES | 300 | ns | VIN=TTL logic swing, VREF=1.4V, VRL=5.0V, RL=5.1K | 3 | ||
| Response time | tRES | 1.3 | ns | VRL=5.0V, RL=5.1K | 3 |
CAD (KiCad official)
- Symbol:
LM339N-HXY - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files:
lm339n-hxy-etched.step/lm339n-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm339n-hxy.step/lm339n-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (7 pp, sha256
32e6d2514026749b, retrieved 2026-11-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).