3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F2553-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F2553-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Master Clear (Reset) input, active-low, to the device; alternately serves as the programming voltage input (VPP) or, when MCLR is disabled, as digital input RE3. |
| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL) with analog input 0 (AN0). |
| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL) with analog input 1 (AN1). |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O (TTL) with analog input 2, A/D reference voltage (low) input (VREF-), and analog comparator reference output (CVREF). |
| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL) with analog input 3 and A/D reference voltage (high) input (VREF+). |
| 6 | RA4/T0CKI/C1OUT/RCV | bidirectional | Digital I/O (Schmitt trigger) with Timer0 external clock input (T0CKI), Comparator 1 output (C1OUT), and external USB transceiver RCV input. |
| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | Digital I/O (TTL) with analog input 4, SPI slave select input (SS), High/Low-Voltage Detect input (HLVDIN), and Comparator 2 output (C2OUT). |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (CLKI), associated with OSC2/CLKO. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in select modes; otherwise general purpose I/O pin RA6. |
| 11 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (Schmitt trigger) with Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI). |
| 12 | RC1/T1OSI/CCP2/UOE | bidirectional | Digital I/O (Schmitt trigger) with Timer1 oscillator input (T1OSI), Capture 2 input/Compare 2 output/PWM2 output (CCP2, default assignment when CCP2MX is set), and external USB transceiver OE output (UOE). |
| 13 | RC2/CCP1 | bidirectional | Digital I/O (Schmitt trigger) with Capture 1 input/Compare 1 output/PWM1 output (CCP1). |
| 14 | VUSB | power_out | Internal USB transceiver supply: the regulator output when the internal USB regulator is enabled, or the power input for the USB transceiver when the regulator is disabled. |
| 15 | RC4/D-/VM | bidirectional | Digital input (TTL) or USB differential minus line (D-, input/output), and external USB transceiver VM input. |
| 16 | RC5/D+/VP | bidirectional | Digital input (TTL) or USB differential plus line (D+, input/output), and external USB transceiver VP input. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O (Schmitt trigger) with EUSART asynchronous transmit (TX) and EUSART synchronous clock (CK). |
| 18 | RC7/RX/DT/SDO | bidirectional | Digital I/O (Schmitt trigger) with EUSART asynchronous receive (RX), EUSART synchronous data (DT), and SPI data out (SDO). |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/AN12/INT0/FLT0/SDI/SDA | bidirectional | Digital I/O (Schmitt trigger) with analog input 12, external interrupt 0 (INT0), PWM Fault input for CCP1 (FLT0), SPI data in (SDI), and I2C data I/O (SDA). |
| 22 | RB1/AN10/INT1/SCK/SCL | bidirectional | Digital I/O (Schmitt trigger) with analog input 10, external interrupt 1 (INT1), SPI serial clock (SCK), and I2C serial clock (SCL). |
| 23 | RB2/AN8/INT2/VMO | bidirectional | Digital I/O (TTL) with analog input 8, external interrupt 2 (INT2), and external USB transceiver VMO output. |
| 24 | RB3/AN9/CCP2/VPO | bidirectional | Digital I/O (TTL) with analog input 9, Capture 2 input/Compare 2 output/PWM2 output (CCP2, alternate assignment when CCP2MX is cleared), and external USB transceiver VPO output. |
| 25 | RB4/AN11/KBI0 | bidirectional | Digital I/O (TTL) with analog input 11 and interrupt-on-change pin KBI0. |
| 26 | RB5/KBI1/PGM | bidirectional | Digital I/O (TTL) with interrupt-on-change pin KBI1 and low-voltage ICSP programming enable pin (PGM). |
| 27 | RB6/KBI2/PGC | bidirectional | Digital I/O (TTL) with interrupt-on-change pin KBI2 and In-Circuit Debugger and ICSP programming clock pin (PGC). |
| 28 | RB7/KBI3/PGD | bidirectional | Digital I/O (TTL) with interrupt-on-change pin KBI3 and In-Circuit Debugger and ICSP programming data pin (PGD). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating VDD range (standard F device, Enhanced Flash) | VDD | 4.2 | 5.5 | V | 7 | ||
| Resolution | NR | 12 | bit | ΔVREF ≥ 3.0V | 35 | ||
| Integral Linearity Error | EIL | -2 | 1 | 2 | LSB | VDD = 3.0V ΔVREF ≥ 3.0V | 35 |
| Integral Linearity Error | EIL | -2 | 2 | LSB | VDD = 5.0V | 35 | |
| Differential Linearity Error | EDL | -1 | 1 | 1.5 | LSB | VDD = 3.0V ΔVREF ≥ 3.0V | 35 |
| Differential Linearity Error | EDL | -1 | 1.5 | LSB | VDD = 5.0V | 35 | |
| Offset Error | EOFF | -5 | 1 | 5 | LSB | VDD = 3.0V ΔVREF ≥ 3.0V | 35 |
| Offset Error | EOFF | -3 | 3 | LSB | VDD = 5.0V | 35 | |
| Gain Error | EGN | -1.25 | 1 | 1.25 | LSB | VDD = 3.0V ΔVREF ≥ 3.0V | 35 |
| Gain Error | EGN | -2 | 2 | LSB | VDD = 5.0V | 35 | |
| Reference Voltage Range (VREFH, VREFL) | ΔVREF | 3 | V | For 12-bit resolution | 35 | ||
| Recommended Impedance of Analog Voltage Source | ZAIN | 2.5 | kΩ | 35 | |||
| VREF Input Current | IREF | 5 | μA | During VAIN acquisition. | 35 | ||
| VREF Input Current | IREF | 150 | μA | During A/D conversion cycle. | 35 | ||
| Ambient temperature under bias | -40 | 125 | °C | 33 | |||
| Storage temperature | -65 | 150 | °C | 33 | |||
| Voltage on any pin with respect to VSS | -0.3 | V | except VDD and MCLR; max printed as VDD + 0.3V | 33 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 33 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.25 | V | 33 | |||
| Total power dissipation | Pdis | 1 | W | 33 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 33 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 33 | |
| A/D Clock Period (PIC18FXXXX) | TAD | 0.8 | 12.5 | μs | TOSC based, VREF ≥ 3.0V | 36 | |
| A/D Clock Period (A/D RC mode, PIC18FXXXX) | TAD | 1 | μs | A/D RC mode | 36 | ||
| Conversion Time | TCNV | 13 | 14 | TAD | not including acquisition time | 36 | |
| Acquisition Time | TACQ | 1.4 | μs | 36 | |||
| Discharge Time | TDIS | 0.2 | μs | 36 |
CAD (KiCad official)
- Symbol:
PIC18F2553-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f2553-i-etched.step/pic18f2553-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f2553-i.step/pic18f2553-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (46 pp, sha256
cd131d0bfa4e63b7, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).