component
1XXD32000MBA
Public Made by Adomby adom
KDS Daishinku Temperature Compensated Crystal Oscillators (TCXOs), SMD2016-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown1XXD32000MBA
KDS Daishinku · Temperature Compensated Crystal Oscillators (TCXOs) · SMD2016-4P
1XXD32000MBA from KDS Daishinku, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground terminal; pin #1 is also marked as the index on the outline drawing. Pin Connections table lists it as GND. |
| 2 | GND | power_in | Ground terminal, listed as GND in the Pin Connections table. |
| 3 | Output | output | Clipped sine wave DC-coupled output with at least 0.8 VP-P level, tested into LOAD_R=10kΩ and LOAD_C=10pF. |
| 4 | VCC | power_in | Supply voltage input; recommended operating range is +3.135 V to +3.465 V (typ. +3.3 V), absolute maximum rating -0.3 V to +4.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | KDS Daishinku |
| Package | SMD2016-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | 2 | |
| Load Impedance (resistance part) | LOAD_R | 9 | 10 | 11 | kΩ | 2 | |
| Load Impedance (parallel capacitance) | LOAD_C | 9 | 10 | 11 | pF | 2 | |
| Operating Temperature Range | T_OPR | -40 | 85 | C | 2 | ||
| Supply Voltage | VCC | -0.3 | 4.6 | V | 2 | ||
| Storage Temperature Range | T_STG | -40 | 85 | C | 2 | ||
| Current Consumption | 2 | mA | 2 | ||||
| Output Level | 0.8 | VP-P | Clipped sine wave (DC-coupled) (note 1) | 2 | |||
| Harmonics | -5 | dBc | 2 | ||||
| Frequency Stability 1. Tolerance | -1.5 | 1.5 | ppm | After 2 times reflow; ref. to nominal frequency; TA=+25C (note 2) | 2 | ||
| Frequency Stability 2. vs Temperature | -0.5 | 0.5 | ppm | TA=-30~+85C; ref. to frequency at TA=+25C | 2 | ||
| Frequency Stability 2. vs Temperature | -1 | 1 | ppm | TA=-40~-30C; ref. to frequency at TA=+25C | 2 | ||
| Frequency Stability 3. vs Supply Voltage | VCC | -0.2 | 0.2 | ppm | VCC=+3.3V±5% | 2 | |
| Frequency Stability 4. vs Load Variation | -0.2 | 0.2 | ppm | LOAD_R//C=(10kΩ//10pF)±10% | 2 | ||
| Frequency Stability 5. vs Aging | -1 | 1 | ppm/year | TA=Room ambient | 2 | ||
| Start Up Time | 2 | ms | @90% of final Vout level | 2 | |||
| SSB Phase Noise | -125 | dBc/Hz | Relative to F0 level; offset 1kHz | 2 | |||
| Nominal Frequency | 32 | MHz | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PET | Cover Tape : PET + Olefin Resin (Conductivity) | 8 | |
| contacts | silver | Leads, such as solder, are not used for this product. (Lead Free) 17.6 About the existence of silver and mercury use | 13 |
CAD (KiCad official)
- Symbol:
1XXD32000MBA - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
1xxd32000mba-etched.step/1xxd32000mba-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);1xxd32000mba.step/1xxd32000mba.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: KDS Daishinku datasheet (14 pp, sha256
829521d3e0b9af8b, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).