Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NB3H83905CDTG

onsemi · Clock Buffers, Drivers · TSSOP-16

NB3H83905CDTG from onsemi, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 XTAL_OUT output Crystal interface oscillator output to drive the crystal.
2 ENABLE2 input Synchronous enable input for the BCLK5 output; open default is HIGH due to an internal pullup resistor to VCC.
3 GND power_in Ground supply pin; all GND, VDD and VDDO pins must be externally connected to the power supply to guarantee proper operation.
4 BCLK0 output Buffered LVCMOS clock output 0, part of the BCLK0:BCLK4 enable group.
5 VDDO power_in Positive supply voltage for outputs; bypass with 0.01 µF capacitor to GND.
6 BCLK1 output Buffered LVCMOS clock output 1, part of the BCLK0:BCLK4 enable group.
7 GND power_in Ground supply pin; all GND, VDD and VDDO pins must be externally connected to the power supply to guarantee proper operation.
8 BCLK2 output Buffered LVCMOS clock output 2, part of the BCLK0:BCLK4 enable group.
9 VDD power_in Positive supply voltage for the core; bypass with 0.01 µF capacitor to GND.
10 BCLK3 output Buffered LVCMOS clock output 3, part of the BCLK0:BCLK4 enable group.
11 GND power_in Ground supply pin; all GND, VDD and VDDO pins must be externally connected to the power supply to guarantee proper operation.
12 BCLK4 output Buffered LVCMOS clock output 4, part of the BCLK0:BCLK4 enable group.
13 VDDO power_in Positive supply voltage for outputs; bypass with 0.01 µF capacitor to GND.
14 BCLK5 output Buffered LVCMOS clock output 5, enabled independently by ENABLE2.
15 ENABLE1 input Synchronous enable input for the BCLK0 to BCLK4 output block; open default is HIGH due to an internal pullup resistor to VCC.
16 XTAL_IN/CLK input Crystal interface oscillator input from the crystal, also a single-ended clock input.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSSOP-16
Category RTC/Clock Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Core quiescent supply current IDD 10 mA VDD = VDDO = 3.135 V to 3.465 V; ENABLEx = LOW 5
Output quiescent supply current IDDO 5 mA VDD = VDDO = 3.135 V to 3.465 V; ENABLEx = LOW 5
Input HIGH voltage VIH 2 V ENABLEx, XTAL_IN/CLK; VDD = VDDO = 3.135 V to 3.465 V 5
Input LOW voltage VIL -0.3 0.8 V ENABLEx, XTAL_IN/CLK; VDD = VDDO = 3.135 V to 3.465 V 5
Output HIGH voltage VOH 2.6 V Parallel terminated 50 Ω to VDDO/2; VDD = VDDO = 3.135 V to 3.465 V 5
Output LOW voltage VOL 0.5 V Parallel terminated 50 Ω to VDDO/2; VDD = VDDO = 3.135 V to 3.465 V 5
Input frequency, crystal Fmax 3 40 MHz VDD = VDDO = 3.135 V to 3.465 V 7
Input frequency, clock (XTAL_IN/CLK) Fmax 0 100 MHz DC to 100 MHz; VDD = VDDO = 3.135 V to 3.465 V 7
Duty cycle skew tSKEWDC 48 52 % VDD = VDDO = 3.135 V to 3.465 V 7
Output to output skew tSKEWO-O 0 50 80 ps Within a device; VDD = VDDO = 3.135 V to 3.465 V 7
Output rise and fall times tr/tf 200 800 ps 20% to 80%; VDD = VDDO = 3.135 V to 3.465 V 7
Supply voltage VDDx 4.6 V GND = 0 V 4
Operating temperature range, industrial TA -40 85 °C 4
Storage temperature range Tstg -65 150 °C 4
Wave solder temperature Tsol 265 °C 3 sec @ 248°C 4
Thermal resistance junction-to-ambient θJA 138 °C/W TSSOP-16, 0 lfpm 4
Thermal resistance junction-to-ambient θJA 108 °C/W TSSOP-16, 500 lfpm 4
Thermal resistance junction-to-case θJC 33 36 °C/W TSSOP-16; JEDEC 2S2P board 4
Input capacitance CIN 4 pF VDD = VDDO = 3.135 V to 3.465 V 5
Power dissipation capacitance (per output) CPD 19 pF Parallel terminated 50 Ω to VDDO/2; VDD = VDDO = 3.135 V to 3.465 V 5
Output impedance ROUT 7 Ω Parallel terminated 50 Ω to VDDO/2; VDD = VDDO = 3.135 V to 3.465 V 5
RMS phase jitter tJIT(Ø) 0.08 ps 25 MHz carrier, 12 kHz to 20 MHz; VDD = VDDO = 3.135 V to 3.465 V 7

CAD (KiCad official)

  • Symbol: NB3H83905CDTG
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: nb3h83905cdtg-etched.step / nb3h83905cdtg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nb3h83905cdtg.step / nb3h83905cdtg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (15 pp, sha256 48f4288fcdaf2a37, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF