Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LDK120M18R

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

LDK120M18R from STMicroelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply voltage, rated 1.9 to 5.5 V operating range with absolute maximum -0.3 to 7 V
2 GND power_in Ground, common reference
3 EN input Logic control input; Low ≤ 0.4 V = shutdown mode, High ≥ 1.2 V = active mode
4 BYP passive Bypass capacitor connection for noise reduction on fixed version, maximum voltage 2 V, may be left floating if not used
5 OUT power_out Regulated output voltage providing 1.8 V ± 2.0% at 25 °C with guaranteed 200 mA output current capability

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5L
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage DC (absolute max) VIN -0.3 7 V DC input voltage; values referred to GND 6
Output voltage DC (absolute max) VOUT -0.3 V Printed as -0.3 to VI + 0.3 V (upper limit depends on VIN) 6
Enable input voltage (absolute max) VEN -0.3 V Printed as -0.3 to VI + 0.3 V (upper limit depends on VIN) 6
ADJ/Bypass pin voltage (absolute max) VBYP/ADJ 2 V 6
Storage temperature range TSTG -65 150 °C 6
Operating junction temperature range TOP -40 125 °C 6
Thermal resistance junction-ambient, SOT23-5L RthJA 160 °C/W SOT23-5L 6
Thermal resistance junction-case, SOT23-5L RthJC 68 °C/W SOT23-5L 6
Operating input voltage VIN 1.9 5.5 V 7
VOUT accuracy VOUT -2 2 % IOUT=1 mA, TJ=25 °C 7
VOUT accuracy VOUT -3 3 % IOUT=1 mA, -40 °C<TJ<125 °C 7
Static line regulation VOUT 0.05 %/V VOUT +1 V ≤ VIN ≤ 5.5 V, IOUT=1 mA 7
Static load regulation VOUT 0.006 %/mA IOUT = 1 mA to 200 mA 7
Dropout voltage VDROP 100 mV IOUT = 100 mA, VOUT=2.5 V 7
Dropout voltage VDROP 150 300 mV IOUT = 200 mA, VOUT=2.5 V, 40 °C<TJ<125 °C 7
Output noise voltage eN 51 µVRMS 10 Hz to 100 kHz, IOUT=10 mA, VOUT=2.5 V, CBYP=10 nF 7
Output noise voltage eN 148 µVRMS 10 Hz to 100 kHz, IOUT=10 mA, VOUT=2.5 V (no CBYP) 7
Supply voltage rejection SVR 55 dB VIN=VOUTNOM+0.5 V +/-VRIPPLE, VRIPPLE=0.1 V, Freq.=120 Hz to 10 kHz, IOUT=10 mA 7
Quiescent current IQ 30 60 µA IOUT=0 mA, -40 °C<TJ<125 °C 7
Quiescent current IQ 50 100 µA IOUT=200 mA, -40 °C<TJ<125 °C 7
VIN input current in OFF mode 1 µA VEN=GND 7
Short-circuit current ISC 400 mA RL=0 7
Enable input logic low VEN 0.4 V VIN=1.9 V to 5.5 V, -40 °C<TJ<125 °C 7
Enable input logic high VEN 1.2 V VIN=1.9 V to 5.5 V, -40 °C<TJ<125 °C 7
Enable pin input current IEN 100 nA VSHDN=VIN 7
Thermal shutdown TSHDN 160 °C 7
Thermal shutdown hysteresis TSHDN 20 °C Hysteresis 7
Output capacitor capacitance COUT 1 22 µF Capacitance (see Section 6: Typical performance characteristics) 7

CAD (KiCad official)

  • Symbol: LDK120M18R
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: ldk120m18r-etched.step / ldk120m18r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ldk120m18r.step / ldk120m18r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (24 pp, sha256 1684d802fa69801e, retrieved 2026-10-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF