Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STC8H1K24-36I-LQFP32

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)

STC8H1K24-36I-LQFP32 from STC Micro, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.0 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC0 analog input, RxD2 serial 2 receive and PWM1P capture/output.
2 P1.1 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC1 analog input, TxD2 serial 2 transmit and PWM1N complementary output.
3 P1.2 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC2 analog input, SPI SS, T2 timer 2 external clock input and PWM2P.
4 P1.3 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC3 analog input, SPI MOSI, T2CLKO timer 2 clock output and PWM2N.
5 P1.4 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC4 analog input, SPI MISO, I2C SDA and PWM3P.
6 P1.5 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC5 analog input, SPI SCLK, I2C SCL and PWM3N.
7 P1.6 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC6 analog input, RxD_3 serial 1 receive, PWM4P, MCLKO_2 clock output and XTALO crystal output.
8 P1.7 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC7 analog input, TxD_3 serial 1 transmit, PWM4N, PWM5_2 and XTALI crystal/external clock input (36 MHz and below).
9 P5.4 bidirectional Standard I/O port pin by default; can be configured as active-low reset input nRST through ISP (takes effect after power cycle), with alternate MCLKO clock output and PWM6_2; the internal 4K pull-up stays on while used as reset and for about 6.5 ms after power-up when used as I/O.
10 Vcc power_in Main supply pin (with AVcc as ADC supply); the operating voltage range is 1.9 V to 5.5 V.
11 ADC_VRef+ input ADC external reference voltage input, which must be connected to an external reference between 2.4 V and MCU-VCC because floating it causes leakage current (may connect directly to MCU VCC when accuracy requirements are low).
12 Gnd power_in Ground pin (AGnd is the ADC ground).
13 P3.0 bidirectional Standard I/O port pin, weak pull-up/quasi-bidirectional after power-on; alternate functions are ADC8 analog input, RxD serial 1 receive and INT4 external interrupt; used with P3.1 for ISP download/emulation.
14 P3.1 bidirectional Standard I/O port pin, weak pull-up/quasi-bidirectional after power-on; alternate functions are ADC9 analog input and TxD serial 1 transmit; used with P3.0 for ISP download/emulation.
15 P3.2 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC10 analog input, external interrupt INT0, SPI SCLK_4, I2C SCL_4 and PWM external trigger inputs PWMETI/PWMETI2.
16 P3.3 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC11 analog input, external interrupt INT1, SPI MISO_4, I2C SDA_4, PWM4N_4 and PWM7_2.
17 P3.4 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC12 analog input, timer 0 external clock T0, T1CLKO clock output, SPI MOSI_4, PWM4P_4, PWM8_2 and comparator output CMPO.
18 P3.5 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC13 analog input, timer 1 external clock T1, T0CLKO clock output, SPI SS_4, and PWMA/PWMB fault-detect inputs PWMFLT/PWMFLT2.
19 P3.6 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC14 analog input, external interrupt INT2, serial 1 receive RxD_2 and comparator negative input CMP-.
20 P3.7 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are external interrupt INT3, serial 1 transmit TxD_2 and comparator positive input CMP+.
21 P2.0 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are PWM1P_2 and PWM5 capture input and pulse output (positive).
22 P2.1 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are PWM1N_2 pulse output (negative) and PWM6 capture input and pulse output.
23 P2.2 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are PWM2P_2 capture and pulse output (positive), PWM7 and SPI SS_2.
24 P2.3 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are PWM2N_2 pulse output (negative), PWM8 and SPI MOSI_2.
25 P2.4 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are PWM3P_2 capture and pulse output (positive), SPI MISO_2 and I2C SDA_2.
26 P2.5 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are PWM3N_2 pulse output (negative), SPI SCLK_2 and I2C SCL_2.
27 P2.6 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate function is PWM4P_2 capture and pulse output (positive).
28 P2.7 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate function is PWM4N_2 pulse output (negative).
29 P0.0 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC8 analog input, timer 3 external clock T3 and PWM5_3 capture and pulse output.
30 P0.1 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC9 analog input, T3CLKO timer 3 clock output and PWM6_3.
31 P0.2 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC10 analog input, timer 4 external clock T4 and PWM7_3.
32 P0.3 bidirectional Standard I/O port pin (high-impedance input after power-on until its mode is set); alternate functions are ADC11 analog input, T4CLKO timer 4 clock output and PWM8_3.

Key specifications

Parameter Value
Manufacturer STC Micro
Package LQFP-32(7x7)
Category Embedded Processors & Controllers
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输入低电平 (打开施密特触发) VIL1 0.99 V 打开施密特触发 1852
输入低电平 (关闭施密特触发) 1.07 V 关闭施密特触发 1852
输入高电平(普通 I/O) (打开施密特触发) VIH1 1.18 V 打开施密特触发 1852
输入高电平(普通 I/O) (关闭施密特触发) 1.09 V 关闭施密特触发 1852
逻辑 0 输入电流 IIL 50 uA 端口电压 0V 1852
逻辑 1 到 0 的转移电流 ITL 100 270 600 uA 端口电压 2.0V 1852
I/O 口上拉电阻 RPU 5.8 5.9 6 KΩ 1852
存储温度 -55 150 ℃ 1851
工作温度 -40 125 ℃ 1851
工作电压 1.9 5.5 V 1851
VDD 对地电压 VDD -0.3 5.5 V 1851
I/O 口对地电压 -0.3 V 1851

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following 1043

CAD (KiCad official)

  • Symbol: STC8H1K24-36I-LQFP32
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: stc8h1k24-36i-lqfp32-etched.step / stc8h1k24-36i-lqfp32-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc8h1k24-36i-lqfp32.step / stc8h1k24-36i-lqfp32.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (2180 pp, sha256 046aea020e4685f3, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF