component
NCP432BCSNT1G
Public Made by Adomby adom
onsemi Voltage Reference, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP432BCSNT1G
onsemi · Voltage Reference · SOT-23-3
NCP432BCSNT1G from onsemi, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode is the shunt current terminal, rated for a continuous cathode current of −100 to +150 mA, and operates at a cathode-to-anode voltage up to 36 V recommended (37 V maximum). |
| 2 | Reference | passive | Reference is the programming input that sets the output voltage through external resistors, with a continuous reference input current range of −5 to +10 mA. |
| 3 | Anode | passive | Anode is the common terminal of the shunt regulator, and the cathode-to-anode voltage is limited to 37 V maximum (36 V recommended). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (TA = 25°C) | Vref | 2.4875 | 2.5 | 2.5125 | V | VKA = Vref, IK = 1 mA, TA = 25°C | 4 |
| Reference Input Voltage (TA = Tlow to Thigh) | Vref | 2.4875 | 2.5 | 2.5125 | V | VKA = Vref, IK = 1 mA, TA = Tlow to Thigh (Note 7: Tlow = −40°C, Thigh = 125°C for NCP432BV; NCP432BC is 0°C to 70°C) | 4 |
| Ratio of Change in Reference Input Voltage to Change in Cathode to Anode Voltage | ΔVref/ΔVKA | -1.85 | -3.1 | mV/V | IK = 1 mA, VKA = 10 V to Vref | 4 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode to Anode Voltage | ΔVref/ΔVKA | -0.8 | -1.8 | mV/V | IK = 1 mA, VKA = 36 V to 10 V | 4 | |
| Reference Input Current | Iref | 81 | 190 | nA | IK = 1 mA, R1 = 220 k, R2 = (value not printed), TA = −40°C to +125°C | 4 | |
| Reference Input Current Deviation Over Temperature Range | IrefT | 22 | 55 | nA | IK = 1 mA, R1 = 10 k, R2 = (value not printed) | 4 | |
| Minimum Cathode Current For Regulation | Imin | 40 | 60 | µA | VKA = Vref | 4 | |
| Off-State Cathode Current | Ioff | 180 | 1000 | nA | VKA = 36 V, Vref = 0 V | 4 | |
| Dynamic Impedance | /ZKA/ | 0.22 | 0.5 | Ω | VKA = Vref, IK = 1.0 mA to 100 mA, f 1.0 kHz | 4 | |
| Cathode to Anode Voltage (recommended) | VKA | 36 | V | Printed minimum is 'Vref' (not a numeric value) | 2 | ||
| Cathode Current (recommended) | IK | 0.04 | 100 | mA | 2 | ||
| Cathode to Anode Voltage (absolute maximum) | VKA | 37 | V | 2 | |||
| Cathode Current Range, Continuous | IK | -100 | 150 | mA | Continuous | 2 | |
| Reference Input Current Range, Continuous | Iref | -5 | 10 | mA | Continuous | 2 | |
| Operating Junction Temperature | TJ | 150 | °C | 2 | |||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 2 | ||
| Total Power Dissipation (SN1 suffix plastic package) | PD | 0.52 | W | TA = 25°C, SN1 suffix (SOT-23) | 2 | ||
| ESD Human Body Model | HBM | 2000 | V | Printed as >2000; per JEDEC JESD22-A114F | 2 | ||
| ESD Charged Device Model | CDM | 1000 | V | Printed as >1000; per JEDEC JESD22-C101E | 2 | ||
| Thermal Resistance, Junction-to-Ambient (SN suffix, 10 mm2 x 35 µm Cu) | RJA | 255 | °C/W | SN Suffix Package (10 mm2 x 35 µm Cu) | 2 | ||
| Thermal Resistance, Junction-to-Lead (Lead 3, SN suffix) | RJL | 80 | °C/W | SN Suffix Package (10 mm2 x 35 µm Cu), Lead 3 | 2 |
CAD (KiCad official)
- Symbol:
NCP432BCSNT1G - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
ncp432bcsnt1g-etched.step/ncp432bcsnt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp432bcsnt1g.step/ncp432bcsnt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (21 pp, sha256
a914ea1acf63147a, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).