3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKE02Z64VLH4R
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
MKE02Z64VLH4R from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | GPIO PTD1 with alternate functions KBI1_P1, FTM2_CH3 and SPI1_MOSI; high-current output drive pin (footnote 1); single-pin current limit ±25 mA. |
| 2 | PTD0 | bidirectional | GPIO PTD0 with alternate functions KBI1_P0, FTM2_CH2 and SPI1_SCK; high-current output drive pin (footnote 1); single-pin current limit ±25 mA. |
| 3 | PTH7 | bidirectional | GPIO PTH7 with no alternate function listed; single-pin current limit ±25 mA. |
| 4 | PTH6 | bidirectional | GPIO PTH6 with no alternate function listed; single-pin current limit ±25 mA. |
| 5 | PTE7 | bidirectional | GPIO PTE7 with alternate functions FTM2_CLK and FTM1_CH1; single-pin current limit ±25 mA. |
| 6 | PTH2 | bidirectional | GPIO PTH2 with alternate functions BUSOUT and FTM1_CH0; single-pin current limit ±25 mA. |
| 7 | VDD | power_in | Digital supply voltage, 2.7 to 5.5 V operating range; absolute maximum VDD -0.3 to 6.0 V. |
| 8 | VDDA/VREFH | power_in | Analog supply VDDA (2.7 to 5.5 V, ΔVDDA to VDD within ±100 mV) and ADC high reference VREFH, which are internally connected. |
| 9 | VREFL | power_in | ADC low reference voltage, equal to VSSA. |
| 10 | VSSA/VSS | power_in | Analog ground VSSA and digital ground VSS, which are internally connected. |
| 11 | PTB7 | bidirectional | GPIO PTB7 with alternate functions I2C0_SCL and EXTAL (oscillator input); single-pin current limit ±25 mA. |
| 12 | PTB6 | bidirectional | GPIO PTB6 with alternate functions I2C0_SDA and XTAL (oscillator output); single-pin current limit ±25 mA. |
| 13 | VSS | power_in | Digital ground supply pin. |
| 14 | PTH1 | bidirectional | GPIO PTH1 with alternate function FTM2_CH1; high-current output drive pin (footnote 1); single-pin current limit ±25 mA. |
| 15 | PTH0 | bidirectional | GPIO PTH0 with alternate function FTM2_CH0; high-current output drive pin (footnote 1); single-pin current limit ±25 mA. |
| 16 | PTE6 | bidirectional | GPIO PTE6 with no alternate function listed; single-pin current limit ±25 mA. |
| 17 | PTE5 | bidirectional | GPIO PTE5 with no alternate function listed; single-pin current limit ±25 mA. |
| 18 | PTB5 | bidirectional | GPIO PTB5 with alternate functions FTM2_CH5, SPI0_PCS0 and ACMP1_OUT; high-current output drive pin (footnote 1); single-pin current limit ±25 mA. |
| 19 | PTB4 | bidirectional | GPIO PTB4 with alternate functions FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2; high-current output drive pin (footnote 1); single-pin current limit ±25 mA. |
| 20 | PTC3 | bidirectional | GPIO PTC3 with alternate functions FTM2_CH3 and ADC0_SE11; single-pin current limit ±25 mA. |
| 21 | PTC2 | bidirectional | GPIO PTC2 with alternate functions FTM2_CH2 and ADC0_SE10; single-pin current limit ±25 mA. |
| 22 | PTD7 | bidirectional | GPIO PTD7 with alternate functions KBI1_P7 and UART2_TX; single-pin current limit ±25 mA. |
| 23 | PTD6 | bidirectional | GPIO PTD6 with alternate functions KBI1_P6 and UART2_RX; single-pin current limit ±25 mA. |
| 24 | PTD5 | bidirectional | GPIO PTD5 with alternate function KBI1_P5; single-pin current limit ±25 mA. |
| 25 | PTC1 | bidirectional | GPIO PTC1 with alternate functions FTM2_CH1 and ADC0_SE9; single-pin current limit ±25 mA. |
| 26 | PTC0 | bidirectional | GPIO PTC0 with alternate functions FTM2_CH0 and ADC0_SE8; single-pin current limit ±25 mA. |
| 27 | PTF7 | bidirectional | GPIO PTF7 with alternate function ADC0_SE15 (12-bit ADC input); single-pin current limit ±25 mA. |
| 28 | PTF6 | bidirectional | GPIO PTF6 with alternate function ADC0_SE14 (12-bit ADC input); single-pin current limit ±25 mA. |
| 29 | PTF5 | bidirectional | GPIO PTF5 with alternate function ADC0_SE13 (12-bit ADC input); single-pin current limit ±25 mA. |
| 30 | PTF4 | bidirectional | GPIO PTF4 with alternate function ADC0_SE12 (12-bit ADC input); single-pin current limit ±25 mA. |
| 31 | PTB3 | bidirectional | GPIO PTB3 with alternate functions KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7; single-pin current limit ±25 mA. |
| 32 | PTB2 | bidirectional | GPIO PTB2 with alternate functions KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6; single-pin current limit ±25 mA. |
| 33 | PTB1 | bidirectional | GPIO PTB1 with alternate functions KBI0_P5, UART0_TX and ADC0_SE5; single-pin current limit ±25 mA. |
| 34 | PTB0 | bidirectional | GPIO PTB0 with alternate functions KBI0_P4, UART0_RX and ADC0_SE4; single-pin current limit ±25 mA. |
| 35 | PTF3 | bidirectional | GPIO PTF3 with no alternate function listed; single-pin current limit ±25 mA. |
| 36 | PTF2 | bidirectional | GPIO PTF2 with no alternate function listed; single-pin current limit ±25 mA. |
| 37 | PTA7 | bidirectional | GPIO PTA7 with alternate functions FTM2_FLT2, ACMP1_IN1 and ADC0_SE3; single-pin current limit ±25 mA. |
| 38 | PTA6 | bidirectional | GPIO PTA6 with alternate functions FTM2_FLT1, ACMP1_IN0 and ADC0_SE2; single-pin current limit ±25 mA. |
| 39 | PTE4 | bidirectional | GPIO PTE4 with no alternate function listed; single-pin current limit ±25 mA. |
| 40 | VSS | power_in | Digital ground supply pin. |
| 41 | VDD | power_in | Digital supply voltage, 2.7 to 5.5 V operating range; absolute maximum VDD -0.3 to 6.0 V. |
| 42 | PTF1 | bidirectional | GPIO PTF1 with no alternate function listed; single-pin current limit ±25 mA. |
| 43 | PTF0 | bidirectional | GPIO PTF0 with no alternate function listed; single-pin current limit ±25 mA. |
| 44 | PTD4 | bidirectional | GPIO PTD4 with alternate function KBI1_P4; single-pin current limit ±25 mA. |
| 45 | PTD3 | bidirectional | GPIO PTD3 with alternate functions KBI1_P3 and SPI1_PCS0; single-pin current limit ±25 mA. |
| 46 | PTD2 | bidirectional | GPIO PTD2 with alternate functions KBI1_P2 and SPI1_MISO; single-pin current limit ±25 mA. |
| 47 | PTA3 | bidirectional | True open-drain GPIO PTA3 (when operated as output) with alternate functions KBI0_P3, UART0_TX and I2C0_SCL; single-pin current limit ±25 mA. |
| 48 | PTA2 | bidirectional | True open-drain GPIO PTA2 (when operated as output) with alternate functions KBI0_P2, UART0_RX and I2C0_SDA; single-pin current limit ±25 mA. |
| 49 | PTA1 | bidirectional | GPIO PTA1 with alternate functions KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1; single-pin current limit ±25 mA. |
| 50 | PTA0 | bidirectional | GPIO PTA0 with alternate functions KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0; single-pin current limit ±25 mA. |
| 51 | PTC7 | bidirectional | GPIO PTC7 with alternate function UART1_TX; single-pin current limit ±25 mA. |
| 52 | PTC6 | bidirectional | GPIO PTC6 with alternate function UART1_RX; single-pin current limit ±25 mA. |
| 53 | PTE3 | bidirectional | GPIO PTE3 with alternate function SPI0_PCS0; single-pin current limit ±25 mA. |
| 54 | PTE2 | bidirectional | GPIO PTE2 with alternate function SPI0_MISO; single-pin current limit ±25 mA. |
| 55 | PTG3 | bidirectional | GPIO PTG3 with no alternate function listed; single-pin current limit ±25 mA. |
| 56 | PTG2 | bidirectional | GPIO PTG2 with no alternate function listed; single-pin current limit ±25 mA. |
| 57 | PTG1 | bidirectional | GPIO PTG1 with no alternate function listed; single-pin current limit ±25 mA. |
| 58 | PTG0 | bidirectional | GPIO PTG0 with no alternate function listed; single-pin current limit ±25 mA. |
| 59 | PTE1 | bidirectional | GPIO PTE1 with alternate function SPI0_MOSI; high-current output drive pin (footnote 1); single-pin current limit ±25 mA. |
| 60 | PTE0 | bidirectional | GPIO PTE0 with alternate functions SPI0_SCK and FTM1_CLK; high-current output drive pin (footnote 1); single-pin current limit ±25 mA. |
| 61 | PTC5 | bidirectional | GPIO PTC5 with alternate functions FTM1_CH1 and RTCO; single-pin current limit ±25 mA. |
| 62 | PTC4 | bidirectional | GPIO PTC4 with alternate functions RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK (serial wire debug clock, 0 to 20 MHz); single-pin current limit ±25 mA. |
| 63 | PTA5 | bidirectional | GPIO PTA5 with alternate functions IRQ, FTM0_CLK and RESET (external reset pin, minimum pulse width 1.5 × tcyc); single-pin current limit ±25 mA. |
| 64 | PTA4 | bidirectional | GPIO PTA4 with alternate functions ACMP0_OUT and SWD_DIO (serial wire debug data); single-pin current limit ±25 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage except true open drain pins | VIN | -0.3 | V | 7 | |||
| Input voltage of true open drain pins | VIN | -0.3 | 6 | V | 7 | ||
| Instantaneous maximum current single pin limit (applies to all port pins) | ID | -25 | 25 | mA | 7 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 6 | |||
| Electrostatic discharge voltage, human body model | VHBM | -6000 | 6000 | V | 6 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 6 | ||
| Latch-up current | ILAT | -100 | 100 | mA | Ambient temperature of 125°C | 6 | |
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Maximum power supply VDD ramp-up rate | 70 | V/ms | 8 | ||||
| Output high current, max total IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Output high current, max total IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Output low voltage, all I/O pins, standard-drive strength | VOL | 0.8 | V | 5 V, Iload = 5 mA | 8 | ||
| Output low voltage, high current drive pins, high-drive strength | VOL | 0.8 | V | 5 V, Iload =20 mA | 8 | ||
| Output low current, max total IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Output low current, max total IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Input leakage current, per pin | /IIn/ | 0.1 | 1 | µA | Per pin (pins in high impedance input mode), VIN = VDD or VSS | 8 | |
| Total leakage current for all port pins | /IINTOT/ | 2 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 | ||
| Pullup resistors, all digital inputs (all I/O pins other than PTA2 and PTA3) | RPU | 30 | 50 | kΩ | When enabled | 8 | |
| Pullup resistors, PTA2 and PTA3 pins | RPU4 | 30 | 60 | kΩ | 8 | ||
| DC injection current, single pin limit | IIC | -2 | 2 | mA | VIN < VSS, VIN > VDD | 8 | |
| DC injection current, total MCU limit, includes sum of all stressed pins | IIC | -5 | 25 | mA | Total MCU limit | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | All pins | 8 | ||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | 9 | |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock), 5 V | SIDD | 2 | 85 | µA | VDD 5 V, -40 to 105 °C | 14 | |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock), 3 V | SIDD | 1.9 | 80 | µA | VDD 3 V, -40 to 105 °C | 14 | |
| ADC adder to Stop (64-pin package) | 86 | µA | VDD 5 V, ADLPC = 1, ADLSMP = 1, ADCO = 1, MODE = 10B, ADICLK = 11B, -40 to 105 °C | 15 | |||
| ADC adder to Stop (64-pin package) | 82 | µA | VDD 3 V, ADLPC = 1, ADLSMP = 1, ADCO = 1, MODE = 10B, ADICLK = 11B, -40 to 105 °C | 15 | |||
| System and core clock frequency | fSys | 40 | MHz | 16 | |||
| Bus frequency | fBus | 20 | MHz | 16 | |||
| Internal low power oscillator frequency | fLPO | 0.67 | 1 | 1.25 | KHz | 16 | |
| Crystal or resonator frequency, low range | flo | 31.25 | 32.768 | 39.0625 | kHz | Low range (RANGE = 0) | 21 |
| Crystal or resonator frequency, high range | fhi | 4 | 20 | MHz | High range (RANGE = 1) | 21 | |
| Internal reference clock (IRC) frequency trim range | fint_t | 31.25 | 39.0625 | kHz | 22 | ||
| DCO output frequency range | fdco | 32 | 40 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 | |
| Factory trimmed internal oscillator accuracy | Δfint_ft | -0.5 | 0.5 | % | T = 25 °C, VDD = 5 V | 22 | |
| Deviation of IRC over temperature when trimmed at T = 25 °C, VDD = 5 V | Δfint_t | -1 | 0.5 | % | Over temperature range from -40 °C to 105°C | 22 | |
| Deviation of IRC over temperature when trimmed at T = 25 °C, VDD = 5 V | Δfint_t | -0.5 | 0.5 | % | Over temperature range from 0 °C to 105°C | 22 | |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1.5 | 1 | % | Over temperature range from -40 °C to 105°C | 22 | |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1 | 1 | % | Over temperature range from 0 °C to 105°C | 22 | |
| Internal reference start-up time | tIRST | 20 | 50 | µs | 22 | ||
| Long term jitter of DCO output clock (averaged over 2 ms interval) | CJitter | 0.02 | 0.2 | %fdco | Averaged over 2 ms interval | 23 | |
| Junction-to-ambient thermal resistance, single-layer (1S) natural convection | RθJA | 71 | °C/W | 64 LQFP column; single-layer (1S) board, natural convection | 19 | ||
| Junction-to-ambient thermal resistance, four-layer (2s2p) natural convection | RθJA | 53 | °C/W | 64 LQFP column; four-layer (2s2p) board, natural convection | 19 | ||
| Junction-to-ambient thermal resistance, single-layer (1S) 200 ft./min. air speed | RθJMA | 59 | °C/W | 64 LQFP column; single-layer (1S) board, 200 ft./min. air speed | 19 | ||
| Junction-to-ambient thermal resistance, four-layer (2s2p) 200 ft./min. air speed | RθJMA | 46 | °C/W | 64 LQFP column; four-layer (2s2p) board, 200 ft./min. air speed | 19 | ||
| Thermal resistance, junction to board | RθJB | 35 | °C/W | 64 LQFP column | 19 | ||
| Thermal resistance, junction to case | RθJC | 20 | °C/W | 64 LQFP column | 19 | ||
| Thermal characterization parameter, junction to package top outside center (natural convection) | ΨJT | 5 | °C/W | 64 LQFP column; natural convection | 19 |
CAD (KiCad official)
- Symbol:
MKE02Z64VLH4R - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mke02z64vlh4r-etched.step/mke02z64vlh4r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke02z64vlh4r.step/mke02z64vlh4r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (37 pp, sha256
dd3ab7b95cbae8e4, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).